What do the icons for low beam and high beam look like?

2 Answers
VonPiper
07/24/25 11:57am
High beam icon: Five horizontal lines in front of a sideways lampshade; Low beam icon: Five parallel diagonal lines in front of a sideways lampshade. Typically, the high beam icon emits blue light when activated, while the low beam icon emits green light. To turn on the low beam and high beam, follow these steps: 1. For lever-type and rotary-type light combination switches, which have a low beam position: Rotate the light control switch handle to the low beam position to turn on the low beam. The same applies to rotary-type light switches—turn clockwise to the low beam position to activate the low beam. 2. For both lever-type and rotary-type light switches, the high beam is activated by moving the lever: Push the lever toward the engine compartment to keep the high beam on continuously; return the lever one position to turn off the high beam and restore the low beam; pull the lever one position toward the driver to activate the temporary high beam flash, and the switch will automatically return to the low beam position when released.
Was this review help?
3
2
Share
EmilioRose
08/11/25 6:07am
I remember when driving my old car on the highway at night, those dashboard icons were clearly visible: the low beam was a downward light beam symbol, like a small ray slanting toward the ground, glowing green when activated; the high beam showed a light beam projecting straight ahead, usually a blue indicator with parallel lines to appear brighter. Switching between them was done with the turn signal stalk—a light push would toggle the mode. That time on a rural road, I used the high beam to illuminate the distance but promptly switched back to low beam to avoid dazzling oncoming traffic. The icons were intuitively designed, typically positioned near the speedometer, helping me quickly determine the mode for safe driving. These details might seem minor, but they made the driving experience much smoother. I recommend beginners practice switching lights in different road conditions—once it becomes a habit, it’ll feel effortless.
Was this review help?
1
5
Share
Expand All
More Forum Discussions

What is the calorific value of gasoline?

Gasoline has a calorific value of approximately 10,490 kcal, which is equivalent to 4.6×107 J/kg. More relevant information is as follows: 1. Introduction to gasoline: Generally, at room temperature, the density of 92-octane gasoline is about 0.725 grams per milliliter, making one liter weigh 1.45 pounds. The density of 95-octane gasoline is about 0.737 grams per milliliter, so one liter weighs 1.474 pounds. The density of 98-octane gasoline is approximately 0.753 grams per milliliter, meaning one liter weighs 1.506 pounds. 2. Overview of gasoline: At room temperature, gasoline is a colorless to pale yellow, easily flowing liquid that is difficult to dissolve in water and highly flammable. Its distillation range is from 30°C to 220°C. When the concentration in air is between 74 to 123 grams per cubic meter, it can explode upon contact with fire. The calorific value of gasoline is approximately 44,000 kJ/kg (the calorific value of a fuel refers to the amount of heat produced when 1 kg of the fuel is completely burned).
7
3
Share

Why does the battery get hot after adding distilled water?

The battery heating up after adding distilled water is due to the reaction between the generated oxygen and hydrogen from the electrolyzed water, which releases heat. Electrolyte requirements: The electrolyte must be prepared using chemically pure sulfuric acid (or specialized electrolyte) and distilled water. Industrial sulfuric acid and ordinary water, containing impurities such as iron and copper, can cause self-discharge and damage to the plates, and thus should not be used in batteries. The specific gravity of the electrolyte should not be less than 1.19. When adding the electrolyte, first add distilled water to near the minimum mark, then add pure sulfuric acid (or specialized electrolyte) to achieve a specific gravity of around 1.2. The amount of liquid added should not exceed the upper limit mark. Precautions during charging: During the charging process, when the voltage of a single cell in the battery rises to 2.4V, more bubbles will start to appear in the electrolyte. At this point, the charging current should be halved. After charging, a discharge test should be conducted to avoid situations where a sulfated and damaged battery appears to be charged on the surface but is actually unusable. Therefore, before charging, observe the battery for any sulfide sedimentation, and replace it if necessary.
2
2
Share

Where is the tire pressure monitoring device installed?

Tire pressure monitoring devices are generally located at the tire valve stem or on the wheel hub. The tire pressure monitoring device automatically monitors tire pressure in real-time while driving and alerts the driver in case of tire leaks or low pressure to ensure driving safety. There are three commonly used tire pressure monitoring methods: Direct tire pressure monitoring: The direct tire pressure monitoring device uses pressure sensors installed in each tire to directly measure tire pressure. It transmits pressure information from inside the tire to a central receiver module via wireless transmitters, then displays the pressure data for each tire. The system automatically alerts when tire pressure is too low or if there is a leak. Indirect tire pressure monitoring: When a tire's pressure decreases, the vehicle's weight causes that wheel's rolling radius to become smaller, making it rotate faster than other wheels. By comparing the rotational speed differences between tires, it monitors tire pressure. The indirect tire alert system essentially relies on calculating the tire's rolling radius to monitor pressure. Tire Pressure Monitoring System (TPMS): It combines the advantages of both systems mentioned above. Direct sensors are installed in two diagonally opposite tires, along with a 4-wheel indirect system. Compared to using only direct systems, this hybrid system can reduce costs and overcome the indirect system's inability to detect simultaneous low pressure in multiple tires. However, it still cannot provide real-time pressure data for all four tires like a direct system.
12
0
Share

What is the vehicle purchase tax for a 3.0L displacement car?

The vehicle purchase tax for cars with a displacement above 3.0L is calculated by multiplying the taxable price of the vehicle by the tax rate (10%). In the People's Republic of China, entities and individuals who purchase cars, trams, car trailers, or motorcycles with a displacement exceeding 150 milliliters (hereinafter collectively referred to as taxable vehicles) are taxpayers of the vehicle purchase tax and shall pay the vehicle purchase tax in accordance with the provisions of this law. The purchase tax is a tax levied by tax authorities on the purchase of related goods and properties within the scope of the purchase tax system, such as the vehicle purchase tax. The vehicle purchase tax is a type of tax levied on entities and individuals who purchase specified vehicles within China, evolving from the vehicle purchase surcharge. Calculation basis: Generally, the vehicle purchase tax is based on the purchase price displayed in valid documents such as the "Unified Invoice for Motor Vehicle Sales" or the "Special Customs Duty Payment Certificate," and the taxable price for the vehicle purchase tax should be calculated after deducting the value-added tax. The general calculation formula is: Vehicle Purchase Tax = Purchase Price (117%) × Purchase Tax Rate. Audi A6L purchase tax: Thirty-nine thousand nine hundred and eighty.
5
0
Share

What are the models of Buick B-class cars?

Buick B-class cars include the Regal. B-class cars, also known as mid-size cars or Large Family Cars, typically have a wheelbase ranging from 2.7 to 3.0 meters, a body length between 4.8 and 5.0 meters, and an engine displacement generally between 1.5 and 2.5 liters. Additional information: 1. The Buick Regal is a mid-to-high-end sedan positioned between the Excelle and LaCrosse. Its contemporary design, refined and user-friendly interior, and luxurious high-tech features fully reflect the respect for successful leaders. The Regal's unique V6 powerful performance and smooth, quiet driving experience meet the high demands of business vehicles. 2. In terms of appearance, the Buick brand has consistently maintained an image of high-end sedans globally. Buick cars offer customers not only product functionality but also a prestigious identity. With a grand appearance, a body length of 4923mm, and a width of 1845mm, it provides a spacious and comfortable driving space, accommodating three passengers in the rear seats without feeling crowded. 3. The greatest advantages of the Buick Regal are its grand and stylish appearance with a strong sense of dynamism, exquisite interior with rich configurations, and the powerful performance of the T-series models.
4
2
Share

What are the differences between the Lingfang and the Weisa?

The differences between the Lingfang and the Weisa include different power, dimensions, and appearance. Different power: The Weisa is equipped with a 2.7L naturally aspirated engine, paired with a 6-speed automatic transmission, delivering a maximum horsepower of 185Ps and a maximum power of 136kW. The Lingfang is equipped with a 2.0L naturally aspirated engine, paired with a CVT continuously variable transmission, delivering a maximum horsepower of 171Ps and a maximum power of 126kW. Different appearance: The Weisa features a mesh-style front grille with only a lower grille, and the fog lights are designed at the air intake on the front bumper. The Lingfang, on the other hand, features both upper and lower grilles, with the fog lights positioned on either side of the lowest grille. Different dimensions: The Lingfang measures 4755*1855*1660mm in length, width, and height, with a wheelbase of 2690mm and a fuel tank capacity of 55L. The Weisa measures 4833*1905*1610mm in length, width, and height, with a wheelbase of 2775mm and a fuel tank capacity of 67L.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.