What Do the Fault Light Symbols on Chery Cars Mean?

What procedures are required for motorcycle inspection?

For motorcycle inspection, you need to prepare the original and photocopy of the motorcycle's registration certificate, personal ID card, and the original compulsory traffic insurance policy. Ensure that any previous traffic violation records are settled before the annual motorcycle inspection. After confirming there are no outstanding violations, take the relevant documents to the insurance company to verify the insurance policy. Then, you can proceed to the motor vehicle inspection site with the above documents for the inspection. The following are the contents of motor vehicle annual inspection: Document check: Verify if the vehicle's user manual, certificate of conformity (for imported vehicles, the commodity inspection certificate), and the factory inspection marks on the vehicle body are complete. Measurement of motor vehicle dimensions: Measure the internal and external dimensions, wheelbase, and axle track of the motor vehicle. Specific measurements include vehicle length, width, height, cargo compartment sideboard height and area, wheelbase, and axle track. Completion of alteration registration form: Conduct the inspection item by item according to technical standards. If passed, fill out the "Initial Inspection and Alteration Registration Form for Motor Vehicles" and enter the curb weight, load capacity, passenger capacity, and driver's compartment seating capacity as specified by the manufacturer.

11

1

Share

What is the function of the carburetor needle height?

The function of the carburetor needle height is to form an annular main nozzle with the carburetor main jet, delivering a certain amount of combustible air-fuel mixture to the cylinder head. Below are the related details: Needle clip adjustment upwards: When the needle clip is adjusted upwards, the needle position moves relatively downward, and the annular main nozzle of the carburetor also decreases. At this time, the combustible air-fuel mixture delivered to the cylinder head through the main nozzle becomes leaner. Conversely, a richer combustible air-fuel mixture is obtained. Needle position adjustment: Adjusting the needle position will directly cause a noticeable change in the carburetor's air-fuel mixture ratio. Although it may start smoothly at different settings, under normal driving conditions, it can lead to various engine issues, such as stalling when accelerating, incomplete combustion in the cylinder head, black smoke from the exhaust pipe, and a series of other problems.

16

2

Share

Where is the damage if the motorcycle fan does not rotate?

Here are the reasons why the motorcycle fan does not rotate: Maintenance issues: Often, the cause of the fan blades not rotating is poor maintenance. If the blades feel stiff when manually rotated after turning off the power, some lubricating oil should be dripped into the shaft to ensure proper lubrication and prevent it from affecting the engine's ability to drive the fan blades. Wear and tear: For wear-induced fan blade immobility, the simplest solution is to replace the parts, especially the bushing, which can easily burn out after wear. Reduced capacitor capacity: If the fan does not rotate due to reduced capacitor capacity, the capacitor can be removed and replaced with a new one of the same model. It is recommended to choose a capacitor 20% larger than the original for better rotation performance. Electrical faults: If the issue is due to an electrical fault, check all wiring connections. Sometimes, the problem lies in damaged wires, which can be repaired accordingly. Poor power contact: Try switching to different power sources. If the issue is internal circuit contact failure within the fan, professional disassembly and inspection may be required.

18

4

Share

How to Spray Windshield Washer Fluid?

Car windshield washer fluid button switch is generally located on the right-hand control stalk of the steering wheel, with possible design variations across different vehicle models. Here is more information about windshield washer fluid: 1. Windshield Washer Fluid Concept: Windshield washer fluid is a consumable item in automotive use. High-quality automotive windshield washer fluid is mainly composed of water, alcohol, ethylene glycol, corrosion inhibitors, and various surfactants. It is commonly known as windshield washer fluid. 2. Windshield Washer Fluid Functions: Windshield washer fluid typically has wetting, penetrating, solubilizing, and other functions, thereby serving the purpose of cleaning and removing dirt. The presence of alcohol and ethylene glycol significantly lowers the freezing point of the liquid, providing anti-freeze properties and quickly dissolving frost.

9

3

Share

How to Turn on the Low Beam Headlights in a Honda Civic?

On the left side of the steering wheel, there is a set of light combination switches. Rotating the combination switch forward one notch turns on the dashboard lights, and rotating it another notch activates the low beam headlights. The usage methods and precautions for low beam headlights are as follows: 1. When driving in dark areas without streetlights or during dusk when it's relatively dark or at dawn when the light is just appearing, you must turn on the low beam headlights. 2. If you encounter heavy fog, snow, or heavy rain, where visibility is obstructed, you must turn on the low beam headlights even during the day. 3. On some road sections where there are lighting facilities but the brightness is insufficient, you should also turn on the low beam headlights.

1

4

Share

What are the reasons why the motorcycle kick starter cannot be pressed down?

The motorcycle kick starter cannot be pressed down possibly due to: the kick starter being stuck, lack of engine oil causing cylinder seizure, or crankshaft seizure; if there is engine oil, it might be due to the oil pump failing to supply oil, leading to cylinder seizure. The key points for kick-starting a motorcycle are: engage neutral gear, pull the choke in cold weather, quickly press down the kick starter and retract it swiftly, and gently apply a bit of throttle. Avoid excessive throttle. Below is an introduction to lightweight motorcycles: Definition and standards of lightweight motorcycles: Regardless of the driving method, a lightweight motorcycle must have a maximum design speed not exceeding 50km/h. If powered by an internal combustion engine, its displacement must not exceed 50ml; if electrically driven, the motor's rated output power must not exceed 4KW. Requirements for driving a lightweight motorcycle: The driver must be at least 16 years old, with a height of 1.45 meters or above, vision of 0.7 or above (or corrected to 0.7 or above), no red-green color blindness, normal hearing, and no physical defects or diseases that hinder safe driving. After passing a medical examination and the traffic rules and driving skills tests administered by the public security authorities, a lightweight motorcycle driver's license will be issued. For licensed lightweight motorcycles, a medical examination is required every two years, and those who fail are not allowed to continue driving.

9

0

Share

What Do the Fault Light Symbols on Chery Cars Mean?

What procedures are required for motorcycle inspection?

What is the function of the carburetor needle height?

Where is the damage if the motorcycle fan does not rotate?

How to Spray Windshield Washer Fluid?

How to Turn on the Low Beam Headlights in a Honda Civic?

What are the reasons why the motorcycle kick starter cannot be pressed down?

What are the types of rear axle models?

What Causes a Motorcycle Gear to Get Stuck and Unable to Be Pressed Down?

What Causes a Scooter to Jerk When Accelerating?

How to Remove the Exterior Rearview Mirror Assembly?