What do the buttons on the Buick Excelle steering wheel mean?

1 Answers
OGabriel
07/29/25 11:43pm
Introduction to the use of the Buick Excelle multifunction steering wheel is as follows: The buttons on the right side of the Buick Excelle steering wheel are mainly used for controlling the infotainment system. When the Bluetooth phone system is not enabled, briefly pressing the call/voice recognition button will activate the voice recognition system; when the radio is playing, pushing the volume adjustment button SRC up or down adjusts the radio station up or down; when an external device is playing, selecting the previous or next track can be achieved by holding the button for fast forward or rewind. The buttons on the left side of the Buick Excelle steering wheel are used for controlling the cruise control system. Press the activation button, and the control indicator light on the instrument cluster will illuminate white. After accelerating to the desired speed, press the SET button to save and maintain the current speed, and the control indicator light on the instrument cluster will turn green, at which point the accelerator pedal can be released.
Was this review help?
10
0
Share
More Forum Discussions

How to Activate BMW Tencent Mini Program?

Equipped with iD7 and with the vehicle system version being 11/2020 or above, you can click on the "Applications" button in the lower left corner of the central control screen. Then you will see the option for "Tencent Mini Program". Of course, you can also wake it up directly by using BMW's IPA Intelligent Personal Voice Assistant.
5
2
Share

What to Do When the Buick Excelle Car Key is Locked Inside the Car?

If the spare key is nearby or within reach, you can use it to open the door and retrieve the key. A locksmith company will have professional tools to open the door from the lock cylinder without causing any damage to the vehicle's lock mechanism. You can also ask a repair technician to use a wire hook to unlock the door, but this method may damage the door's weather stripping.
11
1
Share

How to Switch and Use Four-Wheel Drive?

Switch between the vehicle's two-wheel drive system and four-wheel drive system via the gear lever, including the transition between high-speed four-wheel drive and low-speed four-wheel drive. Alternatively, use the rotary knob to switch, which changes the vehicle's terrain mode, selecting between high-speed four-wheel drive, low-speed four-wheel drive, or the two-wheel drive system.
11
1
Share

How to turn on the high beams on a Cruze?

To turn on the high beams on a Cruze, push the control lever away from the driver. Taking the 2018 Cruze as an example, it belongs to the compact car category with the following dimensions: length 4666mm, width 1807mm, height 1460mm, wheelbase 2700mm, fuel tank capacity 52 liters, and trunk capacity 430 liters. The 2018 Cruze is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 114ps, maximum power of 84kw, maximum torque of 146nm, paired with a 6-speed manual transmission.
6
2
Share

How to Position the Front Hood Support Rod?

Park the vehicle in a safe location and then open the front hood. Enter the driver's compartment; the engine hood release switch is typically located on the left front side of the driver. The front hood release switch is the engine hood switch. Lift it upward to unlock the hood, reach in to release the latch, and then lift the hood. Use the support rod to prop up the hood. Below, you will find the engine hood support rod clip. Apply force here to remove the support rod. When reinstalling, simply clip the support rod back into the plastic clip to complete the installation. Finally, lock the hood to finish.
3
5
Share

How to Deal with Wiper Blade Noise?

Wiper noise is usually caused by foreign objects between the wiper blade and the windshield; check for any foreign objects and replace the wiper blade if necessary. If there is an oil film on the windshield, clean the windshield with a degreaser and adhesive remover. Check whether the lower plane of the wiper arm is in full contact. If the wiper arm is deformed, you can use a wrench to adjust the angle of the wiper arm.
15
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.