What do the buttons above the Haval M6 sunroof mean?

1 Answers
Arthur
07/30/25 7:45am
The buttons above the Haval M6 sunroof are used to open and close the sunroof and adjust the opening degree of the sunshade. The Haval M6 is a compact SUV with body dimensions of 4649mm in length, 1830mm in width, and 1705mm in height, and a wheelbase of 2680mm. In terms of power, the Haval M6 is equipped with a 1.5T turbocharged engine, which has a maximum power of 110kw and a maximum torque of 210nm. In terms of appearance, the front face of the Haval M6 adopts a hexagonal design and a star-dotted design, and the lower surround of the front face adopts a through-type design, which looks more sporty.
Was this review help?
6
0
Share
More Forum Discussions

What are the differences between Lexus RX and NX?

The differences between Lexus RX and NX are: 1. The 0-100 km/h acceleration time is different: Lexus RX takes 8 seconds; Lexus NX takes 9.2 seconds. 2. The fuel tank capacity is different: Lexus RX has a 65-liter fuel tank; Lexus NX has a 56-liter fuel tank. 3. The body dimensions are different: Lexus RX measures 5000mm in length, 1895mm in width, and 1720mm in height, with a wheelbase of 2790mm; Lexus NX measures 4640mm in length, 1845mm in width, and 1645mm in height, with a wheelbase of 2660mm.
20
5
Share

What is the Principle of Starting Fluid?

Starting fluid is composed of low-ignition-point compounds, primarily ether, which has a low flash point and is highly volatile, facilitating smooth engine starts in cold conditions. Here are relevant details: 1. Advantages: Due to its volatile nature and low ignition point, starting fluid enables quick and stable engine ignition under harsh weather conditions or insufficient cylinder pressure, effectively preventing excessive drain on the battery, starter motor, and ignition switch caused by cold, damp weather or low cylinder pressure. 2. Extends Battery Life: In extreme cold, it reduces engine start-up time and prolongs battery lifespan. It can be sprayed into the cylinder to aid ignition when winter engine starts are difficult. 3. Precautions: Do not misuse. Cold-start fluid is specifically for assisting engine ignition in winter when starts are challenging—do not confuse cold-weather starting difficulties with normal-temperature starting issues. If the engine struggles to start at normal temperatures, it indicates a fault in the engine or electrical starting system. Blindly using starting fluid in such cases may mask underlying issues, leading to worsened faults or even severe accidents.
6
1
Share

What is the sequence for starting the car in Subject 2?

Subject 2 car starting sequence is: 1. Press the brake and clutch, then start the car; 2. Release the handbrake and the brake pedal; 3. Slowly lift the clutch until the car begins to move, then fully release the clutch. Subject 2, also known as the small road test, is a component of the motor vehicle driver's license assessment and refers to the field driving skills test. The test items for small car categories C1 and C2 in Subject 2 include: reversing into a parking space, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves. The time limits for Subject 2 are: 1. Reversing into a parking space must be completed within 210 seconds; 2. Parallel parking must be completed within 90 seconds; 3. After stopping on a slope, starting uphill must be done within 30 seconds.
5
0
Share

What do L, O, and R represent on a car?

These are the three markings L, O, and R, which are the adjustment switches for the rearview mirror, used to adjust the rearview mirror. Turning to L adjusts the left rearview mirror, O turns it off, and R adjusts the right rearview mirror. The car rearview mirror reflects the situation behind, beside, and below the car, allowing the driver to indirectly see these positions clearly and expanding the driver's field of vision. Here is additional information: 1. Installing rearview mirrors: Each vehicle should have a rearview mirror installed on the left and right sides inside the car, with their position and angle adapted to the vehicle model. 2. Before starting the car: The driver must observe through the rearview mirror whether there are any vehicles approaching from the side or rear and other traffic conditions behind, in order to make quick and accurate judgments and decisions. Starting blindly may lead to collisions. 3. Driving on multi-lane roads: When vehicles frequently change lanes, it is even more important to accurately observe the traffic conditions behind and to the side through the rearview mirror at all times. If there is a vehicle approaching from behind, do not change lanes. If a vehicle is overtaking from the side or rear, temporarily refrain from overtaking the vehicle ahead.
15
3
Share

Can you turn right on a red light when driving in the right-turn lane?

Whether you can turn right on a red light when driving in the right-turn lane depends on the specific situation: If there is a red right-turn arrow on the traffic light or there is no right-turn lane marking at the intersection, you cannot turn right; If there is no right-turn green arrow on the traffic light and the intersection has a right-turn lane marking, turning right is allowed by default. Situations where turning right on a red light is permitted include: 1. If the intersection has an arrow signal light, right turns are only allowed when the right-turn arrow is green, otherwise turning right is prohibited; 2. If there is a sign prohibiting right turns on red at the intersection, right turns are only allowed when the light is green; 3. If there are no other signs at the intersection, vehicles can turn right on red as long as it does not interfere with other vehicles or pedestrians.
14
0
Share

How to Clear the Wrench Light on Karry K50?

The method to clear the wrench light on Karry K50 is: Press and hold the black knob on the instrument panel, turn the ignition key three times, shift the car to the second gear without starting the engine to clear the light. Taking the 2019 Karry K50 as an example, it belongs to the MPV category with body dimensions of: length 4501mm, width 1760mm, height 1790mm, wheelbase of 2755mm, fuel tank capacity of 45 liters, and curb weight of 1230kg. The 2019 Karry K50 features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.5L naturally aspirated engine producing maximum power of 109 PS (80 kW) and maximum torque of 140 N·m, paired with a 5-speed manual transmission.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.