What do S gear and D gear mean?

1 Answers
Preston
07/29/25 4:55pm
D gear stands for "Drive", representing the forward gear; S gear stands for "Sports", representing the sport mode. The relevant introductions are as follows: 1. D gear is the forward gear: When the car is in D gear, the driver does not need to control the gear shift anymore, just operate the accelerator and brake directly. D gear is usually used for daily driving, but when driving on mountain roads or climbing slopes, it should be switched to low gear. 2. S gear is the sport mode: When the car is in this gear mode, the transmission can shift gears freely, but there will be a certain delay in shifting, which allows the engine to maintain high-speed operation for a long time, thereby obtaining more power and faster acceleration ability. S gear is usually used for climbing slopes and quick overtaking.
Was this review help?
7
1
Share
More Forum Discussions

Under what conditions do cars emit the highest levels of carbon monoxide?

Idling with the engine running produces the most carbon monoxide emissions. Principle: When a car engine's combustion chamber operates at high temperatures, it is more prone to producing carbon monoxide. When idling with the engine running but no load, the fuel burns without doing work, causing the combustion chamber temperature to remain high, thus increasing carbon monoxide production. Here are methods to reduce vehicle emissions: 1. Turn off electrical devices after exiting the car: including the radio, air conditioning, and window heating systems. 2. Proper tire pressure saves fuel: Insufficient tire pressure shortens tire lifespan. Tests show that maintaining manufacturer-recommended tire pressure can reduce fuel consumption by approximately 3.3%. 3. Accelerate gently: A single hard acceleration versus gentle acceleration at the same speed can result in a 12mL difference in fuel consumption, leading to an extra 0.4g of CO2 emissions per kilometer.
3
1
Share

How to Shift Gears at a Red Light in an Automatic Transmission Car?

When waiting at a red light in an automatic transmission car, the appropriate gear to shift into depends on the duration of the red light. The shifting recommendations are as follows: 1. If the red light is less than 30 seconds, it is recommended that the driver simply keep their foot on the brake. 2. If the red light lasts between 30 seconds and 1 minute, the driver should shift into N (Neutral) gear and engage the handbrake. 3. For red lights longer than 1 minute, it is advisable to shift into P (Park) gear and engage the handbrake. Below are some general driving tips for automatic transmission cars: 1. Shifting gears at a red light: For short red lights, it is recommended to shift into P or N gear for lower fuel consumption; on a slope, shifting into P gear is advisable; on flat roads, remember to engage the handbrake when in N gear to prevent accidents. 2. Starting the car in P gear: When starting the car, shifting from P to D gear passes through R (Reverse) gear, which can cause a reverse impact on the transmission, potentially damaging it over time and harming the vehicle.
6
4
Share

How long does the battery of an ETC device last?

Generally, the battery of an ETC device can last for 3 years under normal usage. For solar-powered ETC devices that are not frequently used, it is recommended to charge them every 3 months to prevent natural discharge of the internal battery. The ETC device has an internal battery and is charged externally via solar power, so it does not require regular charging. ETC stands for Electronic-Toll-Collection, which means electronic toll collection system. To apply for an ETC, the following documents are required: the vehicle owner's valid ID card and vehicle registration certificate (original and photocopy). If the application is handled by a proxy, the proxy's valid ID card is also needed. The photocopy of the vehicle registration certificate should include the page with the most recent annual inspection stamp. Additionally, a bank card for deducting highway tolls is required. Applicants must be between 18 and 60 years old, and the vehicle must be registered under an individual's name. For company vehicles, the required documents include: a letter of introduction from the vehicle owner (with official seal), a photocopy of the organization code certificate or business license (with official seal), the proxy's original ID card, the original vehicle registration certificate, and the vehicle that needs to be equipped with ETC. How ETC works: The vehicle-mounted electronic tag installed on the windshield communicates with the microwave antenna in the ETC lane at the toll station. Using computer networking technology, the system settles the payment with the bank in the background, allowing vehicles to pass through highway or bridge toll stations without stopping to pay the toll. Benefits of installing ETC: Time-saving: Eliminates the hassle of waiting in line. Green and eco-friendly: Reduces noise and exhaust emissions by allowing vehicles to pass through toll stations without stopping. Cost-saving: Reduces vehicle wear and fuel consumption by minimizing the frequency of starting and braking. Users can also enjoy toll discounts. Efficiency improvement: ETC lanes can theoretically increase traffic efficiency by 2-3 times, making traditional ETC systems more advanced and high-tech. Compared to license plate payment, ETC technology is more mature and advantageous.
1
3
Share

What Are the Benefits of Antifreeze?

Antifreeze prevents the coolant from freezing and cracking the radiator or damaging the engine cylinder block or head when the vehicle is parked in cold winter conditions. Antifreeze should not be diluted with water. As an alcohol-based chemical reagent, antifreeze provides freeze and rust protection, and adding water alters its properties, reducing its effectiveness. Functions of Antifreeze: Antifreeze is a coolant containing special additives, primarily used in liquid-cooled engine cooling systems. It offers excellent performance in preventing freezing in winter, boiling in summer, and resisting scale and corrosion year-round. Composition of Antifreeze: The main components of antifreeze are 50% purified water, 40% methanol, and 10% other substances. Types of Antifreeze: Antifreeze is generally categorized into three types: ethanol-water, glycerol-water, and ethylene glycol-water. Can Different Antifreezes Be Mixed? Only antifreeze of the same brand should be used. Different brands may have varying production formulas, and mixing them could cause chemical reactions between additives, rendering them ineffective.
18
3
Share

Does the BYD F3 Support Bluetooth?

The BYD F3 supports Bluetooth functionality through its infotainment system for operating mobile phones. To establish a connection, the two devices need to be paired once, and this pairing can only be performed when the vehicle is stationary. Press the 'Phone' button on the infotainment system, then click the function button or wait for the search process to complete. The screen will display the names of found Bluetooth devices. Select the mobile phone you wish to pair from the list. The infotainment system and mobile phone are now connected. Important Notes for In-Car Bluetooth Connection: Multiple mobile phones can be paired with the infotainment system, but only one mobile phone can be connected to the system at any given time. When the infotainment system is turned on, it will automatically attempt to connect to the last connected mobile phone. If the connection to this phone cannot be established, the system will automatically try to connect to the next paired device in the list. The maximum effective range for Bluetooth connection is approximately 10 meters. If the distance exceeds this range, the connection will be interrupted. The connection will automatically resume once the devices are back within the effective range.
5
4
Share

Why Do Car Tires Squeak When Turning?

Car tire squeaking during turns commonly occurs in the front wheels, mainly due to the following reasons: 1. Excessive debris accumulation on the mudguards or sound insulation pads of the front wheels. During turns, the tires interfere with the debris, causing squeaking sounds. 2. Loose or fallen fastening screws on the mudguards or sound insulation pads, causing them to lift. The front wheels interfere with these lifted parts during turns, resulting in friction and squeaking. It is necessary to inspect the fastening condition of the mudguards and sound insulation pads and eliminate factors like looseness or lifting. 3. Unauthorized modification of car tires, such as replacing them with non-original size tires. This constitutes illegal modification and poses significant safety hazards. The original size tires should be reinstalled.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.