What do M1 and M2 on the BMW M4 steering wheel mean?

1 Answers
KimberlyLynn
07/29/25 6:31pm
The M on the BMW M4 steering wheel stands for the full comfort mode. M1 is suitable for urban road use, while M2 is suitable for highway use. Some SUVs, sports cars, and premium sedans are equipped with a driving mode selection function, allowing drivers to choose between comfort, sport, and automatic modes. The BMW M4 is an imported sedan available in two models: a two-door coupe and a convertible coupe. The two-door coupe has a body length, width, and height of 4678mm, 1870mm, and 1394mm respectively, while the convertible coupe measures 4678mm, 1870mm, and 1398mm. The top speed is 250 km/h.
Was this review help?
11
2
Share
More Forum Discussions

How to Check Tire Pressure on Volkswagen CC?

Volkswagen CC uses an indirect tire pressure monitoring system that does not display specific tire pressure values but alerts the driver with a warning light when abnormal tire pressure is detected. When tire pressure decreases, the vehicle's weight causes the tire diameter to reduce, leading to changes in wheel speed. These speed variations trigger the indirect tire pressure monitoring system's alarm, notifying the driver of insufficient tire pressure. The Volkswagen CC is a mid-size car. Taking the 2021 Volkswagen CC as an example, its body dimensions are: length 4865mm, width 1870mm, height 1459mm, with a wheelbase of 2841mm. The 2021 Volkswagen CC is equipped with a 2.0T turbocharged engine, delivering a maximum power of 137kW and a maximum torque of 320Nm, paired with a 7-speed dual-clutch transmission.
6
1
Share

Where is the tire pressure switch reset for the Sagitar?

The tire pressure switch reset for the Sagitar is located inside the glove compartment on the passenger side. After opening it, you can see the tire pressure monitoring reset button. Press and hold the button for more than 3 seconds to reset. The Sagitar is a compact car under FAW-Volkswagen, with a body structure of a 4-door, 5-seat sedan. Its dimensions are: length 4753 mm, width 1800 mm, height 1462 mm, wheelbase 2731 mm, and fuel tank capacity of 50 liters. The Sagitar is equipped with a 1.2T turbocharged engine, delivering a maximum horsepower of 116 hp, maximum power of 85 kW, maximum power speed of 5000 rpm, and is paired with a 5-speed manual transmission.
13
1
Share

How to Reset the Tire Pressure Warning on a Volkswagen?

There are specific methods to reset the tire pressure warning on a Volkswagen depending on the situation: 1. Ensure the tire pressure is normal, then press and hold the tire pressure monitoring button located in front of the gear lever on the right side for three seconds to reset it; 2. After adjusting tire inflation pressure or replacing wheels, turn on the ignition, press and hold the SET button for the tire pressure control system until the dashboard indicator light comes on. Once the new parameters are stored and the light goes off, the tire pressure monitoring system will be reset. Taking the 2021 Volkswagen Lavida Comfort Edition as an example, it is a compact 4-door 5-seater sedan with body dimensions of 4670mm in length, 1806mm in width, 1474mm in height, and a wheelbase of 2688mm.
19
5
Share

Can Semi-Synthetic Engine Oil Be Changed Once a Year?

Semi-synthetic engine oil should not be changed once a year; its replacement interval is 6 months or 7,500 kilometers. The consequences of not changing the oil include: 1. The oil becomes ineffective and deteriorates, increasing wear and damage to engine components; 2. The sealing effect is reduced, causing the oil to become watery and lose its sealing function; 3. The cooling effect is diminished; 4. Accumulated impurities can corrode internal engine parts; 5. The lubrication performance of bearings and the cooling function of mechanical transmission parts are lost. The steps for changing engine oil are: 1. Run the engine until it reaches operating temperature; 2. Engage the handbrake and lift the vehicle; 3. Unscrew the oil filter and drain the oil; 4. Apply new oil to the gasket of the new filter; 5. Pour new oil into the oil pan; 6. Check for leaks under the engine; 7. Lower the vehicle, check the oil dipstick, and start the engine; 8. Turn off the engine and recheck the oil level.
3
2
Share

Can I still drive if the car's temperature gauge lights up?

You should not drive if the car's temperature gauge lights up. A lit temperature gauge indicates that the vehicle's engine is overheating, and continuing to drive may damage the engine's power system. The normal operating temperature range for a car's temperature gauge is between 70 to 90 degrees Celsius. Its function is to indicate the temperature of the coolant in the radiator while the engine is running. The engine requires a specific operating temperature to function properly; temperatures that are too high or too low can negatively affect the engine's performance and operation. Common causes of an overheating temperature gauge include: 1. Insufficient coolant due to low fluid levels or leaks; 2. Abnormal heat dissipation caused by a malfunctioning cooling fan; 3. Poor circulation and heat dissipation due to a faulty water pump; 4. Engine issues or failures in the cooling system.
19
4
Share

Where is the Swift fuel filter located?

The Swift fuel filter is located inside the fuel tank, integrated with the fuel pump. The primary function of the fuel filter is to remove impurities from the fuel, ensuring clean gasoline enters the engine for combustion and reducing carbon deposits in the cylinders. The Swift is a compact 5-door, 5-seat hatchback with the following dimensions: length 3765mm, width 1690mm, height 1510mm, and a wheelbase of 2390mm. It has a fuel tank capacity of 45 liters. The Swift is equipped with a 1.5L naturally aspirated engine, delivering a maximum power of 76kW at 6000rpm, paired with a 5-speed manual transmission.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.