What do LO and HI mean in the Odyssey?

What is LIM?

LIM refers to the speed limit function button. When this function is activated, the maximum vehicle speed can only reach the set limit speed. The method of using LIM is: 1. When not in cruise control state and the vehicle speed is above 30 kilometers per hour; 2. Press the LIM button, then press SET- to activate the speed limit adjustment mode; 3. Use SET+ to increase or decrease the speed limit value to reach the desired setting; 4. In speed limit mode, pressing the LIM button on the steering wheel can cancel the speed limit mode. Situations where the LIM function may fail include: 1. Going downhill; 2. Fully depressing the accelerator pedal.

4

2

Share

What are the symptoms of a faulty throttle pedal sensor?

The symptoms of a faulty throttle pedal sensor include the inability to generate a throttle opening signal to the ECU, causing the ECU to only inject fuel based on the intake air volume at idle. Below is additional information: 1. Throttle Pedal: The throttle pedal, also known as the accelerator pedal, is part of the vehicle's fuel supply system. By controlling the amount of pedal depression, it regulates the throttle opening of the engine, controls the intake air volume, and the ECU adjusts the fuel injection accordingly to manage engine speed. The throttle pedal position sensor detects how much the pedal is depressed, and the ECU uses this signal to control the throttle motor to rotate to a specific angle, ensuring the required intake air volume for various operating conditions. 2. Throttle Pedal Operation Method: The throttle of a car engine is typically controlled by the pedal, also referred to as the accelerator pedal, which is the device for regulating fuel supply to the engine. When operating the throttle pedal, the right heel should rest on the floor of the driver's compartment as a pivot point, with the ball of the foot lightly pressing on the accelerator pedal. The ankle joint's flexion and extension movements are used to depress or release the pedal. When operating the throttle pedal, apply gentle force, ensuring smooth and gradual movements.

12

3

Share

How to Calibrate Volvo Tire Pressure?

When the vehicle is stationary, locate and press the 'mycar' button on the center console, select the tire pressure monitoring option, press the confirm button, and then drive for a while to allow automatic calibration. Hazards of Overinflated Tires: Reduced friction and adhesion of the tires, affecting braking performance; Causes steering wheel vibration and deviation, reducing driving comfort; Accelerates localized wear of the tread center pattern, shortening tire lifespan; Increases vehicle vibration, indirectly affecting the lifespan of other components; Overextends the tire cords, reducing elasticity and increasing the load on the vehicle during driving; Decreases puncture resistance. Sharp objects like nails or glass on the road can easily penetrate the tire, causing internal cracks and blowouts. Hazards of Underinflated Tires: Increases friction with the road surface, leading to higher fuel consumption; Causes heavy steering and deviation, compromising driving safety; Increases movement in various parts of the tire, leading to abnormal heat due to excessive rolling; Reduces the functionality of cords and rubber, causing delamination or cord breakage and excessive friction with the rim, leading to bead damage and abnormal wear; Multiplies friction between the tire and the ground, rapidly increasing tire temperature, softening the tire, and drastically reducing strength. High-speed driving may result in blowouts; Increases tire body deformation, leading to sidewall cracks and excessive heat from flexing, accelerating rubber aging, cord fatigue, and breakage, while also increasing the tire's contact area and accelerating shoulder wear.

14

2

Share

How to Use Rearview Mirrors When Reversing?

The method for using rearview mirrors when reversing is as follows: 1. When the car image occupies the entire rearview mirror, the distance is 3 meters; 2. When the car image occupies two-thirds of the rearview mirror, the distance is 5 meters; 3. When the image occupies half of the rearview mirror, the distance is 9 meters; 4. When the car image occupies one-third of the rearview mirror, the distance is 12 meters; 5. When the lower edge of the front windshield aligns with the upper edge of the rear bumper of the car in front, the distance is 1 meter; 6. When the lower edge of the front windshield aligns with the lower edge of the rear bumper of the car in front, the distance is 2 meters; 7. When the lower edge of the front windshield aligns with the lower edge of the rear tire of the car in front, the distance is 3 meters. Rearview mirrors are located on the left and right sides of the front of the car and at the front of the car body. They are important safety components, and their function is to allow the driver to indirectly see the conditions behind, beside, and below the car, thereby expanding the driver's field of vision.

2

4

Share

Can You Charge the Battery When the Car Doesn't Start?

You can charge the battery when the car doesn't start. The functions of a car battery are: 1. To supply power to the starting system, ignition system, and electronic fuel injection system during engine startup; 2. To provide power to the car's electrical equipment when the engine is off or at low idle; 3. To act as a voltage stabilizer for the vehicle's electrical system; 4. To store excess electrical energy generated by the alternator. Methods for maintaining a car battery include: 1. Cleaning the white acid corrosion powder accumulated on the battery terminals to extend its service life; 2. Adding distilled water to the level between the upper and lower indicator lines; 3. Checking whether the battery is charging normally.

8

2

Share

Do Automatic Transmission Cars Need a Break-in Period?

Automatic transmission cars do require a break-in period. The break-in period refers to the process where mechanical components initially come into contact, rub against each other, and mesh together during early operation. Key considerations during the break-in period for automatic transmission cars include: 1. Preheating before starting: Turn the key to the second position and wait 5 to 10 seconds before starting the engine to protect the new car's engine; 2. Avoid emergency braking: Emergency braking can shock the braking system during the break-in period, increasing the impact load on the chassis and engine; 3. Avoid overloading: Running a new car at full capacity during the break-in period can damage mechanical components; 4. Avoid long-distance trips: Taking long trips during the break-in period increases the continuous working time of the engine, which can lead to premature wear of mechanical components.

13

3

Share

What do LO and HI mean in the Odyssey?

What is LIM?

What are the symptoms of a faulty throttle pedal sensor?

How to Calibrate Volvo Tire Pressure?

How to Use Rearview Mirrors When Reversing?

Can You Charge the Battery When the Car Doesn't Start?

Do Automatic Transmission Cars Need a Break-in Period?

Will a New Car Door Rust After Sheet Metal Repainting?

Is Dongfeng Nissan a State-Owned Enterprise?

How many seats does the Audi TT have?

What Causes 5th Gear to Pop Out in a Manual Transmission?