What do license plates in Hubei Province start with?

Why is there a sudden low tire pressure warning?

The sudden low tire pressure warning is caused by tire damage or slow air leakage. When a car's tire pressure is too low, it affects the vehicle's handling and increases fuel consumption, so it's important to replenish the tire pressure promptly. Tire pressure refers to the air pressure inside the tire. In terms of car maintenance, the engine is the heart of the car, and engine damage will lead to the end of the car's life. Tire pressure is the blood pressure of the car, and the level of tire pressure plays a crucial role in the car's performance and power. Air pressure is the lifeline of the tire, and both too high and too low pressure will shorten the tire's service life.

5

4

Share

What to do if the coolant warning light goes off after restarting?

If the coolant warning light goes off after restarting, it is recommended not to continue driving. You can add coolant before resuming use of the vehicle. Although the coolant warning light turns off after restarting, it will likely come on again after driving for a while. Coolant refers to a liquid with antifreeze properties, composed of water, antifreeze, and additives. It prevents the coolant from freezing and expanding during cold seasons, which could damage the radiator and engine cylinder block. Antifreeze is not just for winter use; it should be used year-round. As part of regular vehicle maintenance, the engine coolant should be replaced every year.

18

1

Share

What are the differences between laser lenses and LED lenses?

Laser lenses and LED lenses differ in the following aspects: Different definitions: Laser lenses consist of laser diodes located at the rear of the vehicle; LED lenses refer to vehicle lights that use LEDs (light-emitting diodes) as the light source. Different characteristics: Laser lenses are more energy-efficient and fuel-saving; LED lenses are characterized by high brightness, a wide variety of colors, low power consumption, and long lifespan. Car headlights, also known as car front lights or car LED daytime running lights, serve as the eyes of the car. They not only relate to the external image of the car owner but are also closely linked to safe driving at night or under bad weather conditions. Additionally, the use and maintenance of car lights should not be overlooked.

11

1

Share

What is the reason for the failure of the Emgrand steering wheel locking system to unlock?

Emgrand steering wheel locking system unlock failure is caused by a malfunction in the car's steering wheel locking system. At this time, it is necessary to rematch the car's steering wheel locking system to eliminate the unlock failure problem. The specific operation method is: Open the driver's side door; Step on the brake pedal, prepare to start the engine, and press the one-button start button at the same time; Wait for all the instrument lights on the dashboard to light up, at this time the engine has been started, and the unlock failure problem can be solved. Geely Emgrand is one of the three sub-brands launched by Geely Automobile from 2009 to 2014, with various models such as GL, GS, and New Emgrand. Among them, the EC718 and EC718-RV are the three-box and two-box versions of Geely's B-class sedan.

8

1

Share

What does 180turbo mean?

180turbo refers to a 1.0T turbocharged engine. A turbocharged engine is an engine equipped with a turbocharger, which is a type of internal combustion engine that utilizes rotating components to extract kinetic energy from the fluid passing through it. It is commonly used in aircraft, large ships, or vehicles. The turbocharged engine acts as an air compressor, using the exhaust gases from the engine as power to drive the turbine located in the exhaust passage. As the turbine rotates, it drives the coaxial impeller in the intake passage, compressing fresh air delivered from the air filter pipe and then sending it into the cylinder. When the engine speed increases, the high-speed exhaust gases accelerate the turbine, synchronizing the exhaust gas discharge speed with the turbine speed, thereby increasing the degree of air compression. This results in a corresponding increase in the engine's air intake, more complete combustion in the cylinder, and higher power output.

18

0

Share

Which gear should an automatic transmission car be in when parked for a long time without turning off the engine?

If an automatic transmission car's engine is left running for a long time without turning it off, you can shift into N (Neutral) gear and engage the handbrake, or shift into P (Park) gear and firmly engage the handbrake. Both N and P gears can be used when parking, but there are differences between the two. The N gear does not have a locking mechanism, while the P gear does. When shifted into P gear, the locking mechanism inside the transmission locks the gear, effectively locking the wheels indirectly. Once in P gear, the car will not roll even if the brake pedal is not pressed. When shifted into N gear, the transmission's locking mechanism does not engage, and if the brake pedal is not pressed, the car may roll. Here are the considerations for shifting gears in different scenarios for automatic transmission cars: Normal driving: There are no specific requirements for gear selection; you can drive continuously in D (Drive) gear. D gear stands for "Drive." When shifted into this gear, pressing the accelerator allows the car to move. In this gear, the transmission automatically shifts based on speed and throttle input. At traffic lights, you can remain in D gear while pressing the brake pedal. Parking: When the engine is turned off, shift into P (Park) gear to indicate the car is no longer in use. Some cars require shifting into P gear to remove the key. P gear stands for "Parking." It is used when parking or stopping the car for an extended period. Note: Always ensure the car is completely stopped before shifting into P gear. Shifting into P gear before the car has fully stopped can damage the transmission. In P gear, the wheels are mechanically locked, preventing the car from moving forward or backward, which is especially important when parking on slopes. However, avoid shifting into P gear during brief stops (e.g., at traffic lights) to prevent severe transmission damage in case of a rear-end collision. Reversing: After pressing the brake pedal and ensuring the car has stopped moving forward, shift into R (Reverse) gear. Gently releasing the brake pedal will allow the car to move backward. R gear stands for "Reverse." Whether in a manual or automatic transmission, R is the reverse gear. Shift into R gear only when the car is stationary and the engine is idling. Never use R gear while the car is moving forward, and be cautious with accelerator control when reversing. Waiting in traffic: When stopped in traffic or driving in congested areas, shift into N (Neutral) gear. N gear stands for "Neutral." At traffic lights, you can shift into this gear while pressing the brake pedal. For longer waits, engage the handbrake to rest your foot. A common misconception is that shifting into N gear while coasting downhill or at high speeds saves fuel. This is incorrect and can damage the transmission. Highway driving or overtaking: Shift into S (Sport) gear for high-speed overtaking. S gear is the car's sport mode, allowing free gear changes like D gear. It is also useful for climbing hills, as it provides maximum torque output and acceleration.

9

5

Share

What do license plates in Hubei Province start with?

Why is there a sudden low tire pressure warning?

What to do if the coolant warning light goes off after restarting?

What are the differences between laser lenses and LED lenses?

What is the reason for the failure of the Emgrand steering wheel locking system to unlock?

What does 180turbo mean?

Which gear should an automatic transmission car be in when parked for a long time without turning off the engine?

What are the retake rules for the Subject 2 driving test?

Is the car air conditioner off or on?

How many seats does an Iveco minibus have?

What are the symptoms of a faulty clutch master cylinder?