What do L and H stand for in electric vehicles?

1 Answers
McElaina
07/25/25 12:59pm
H stands for full charge, and L stands for low charge. Below is relevant information about electric vehicles: 1. Concept: Electric vehicles, also known as electric-driven vehicles, are powered by electricity. Typically, electric vehicles use batteries as their energy source, converting electrical energy into mechanical motion through components like controllers and motors, with speed adjusted by controlling current intensity. 2. Performance: Lead-acid batteries (including lead-acid gel batteries) are cost-effective and offer stable performance, making them the most commonly used battery type in the market. Lithium-ion batteries (commonly referred to as lithium batteries) are more expensive but offer advantages such as higher energy density, greater power density, minimal self-discharge, no memory effect, excellent cycle characteristics, a wide operating temperature range, and being environmentally friendly.
Was this review help?
7
5
Share
More Forum Discussions

Why doesn't BMW use the Prince engine?

Some BMW models use the Prince engine, such as the Mini, BMW 1 Series, 3 Series, etc. Function of the engine: Convert the thermal energy of gasoline or diesel into mechanical energy by burning the expanding gas in a sealed cylinder to push the piston. Engine maintenance methods: Use qualified engine oil; use qualified coolant and antifreeze; regularly clean the water tank scale; regularly clean engine carbon deposits; regularly replace the car's three filters; maintain reasonable RPM, etc. Engine working principle: For normal operation, the engine must continuously inject fuel and ignite, meaning the spark plug must fire once every time the fuel injector sprays fuel. If the spark plug does not fire, the cylinder will have no flame when the valve closes, the gasoline will not ignite, and the engine will stall.
20
2
Share

What are the reasons for the limited driving assistance system in the new BMW 3 Series?

The reasons for the limited driving assistance system in the new BMW 3 Series are as follows: Camera obstruction issues: At night, the camera's line of sight may be blocked, triggering the "Driving Assistance System Limited" warning. This is more likely to happen if it's also raining. Installing a hidden dashcam, especially a low-end model, may obstruct the light-sensitive camera on the interior rearview mirror. Some installers may also forget to remove the sensor casing inside, leading to this issue. Additionally, a malfunctioning dashcam or battery drain can cause the warning to appear. Window tinting or car wraps may also obstruct the camera's line of sight, triggering the warning. Radar issues: The radar may be blocked by foreign objects like tree branches, or license plate frames may obstruct the radar sensor wiring. Deformation of the radar mounting position or loose radar components may require recalibration.
10
0
Share

Does BMW Sensor System Failure Need Repair?

BMW sensor system failure requires repair or replacement. Introduction to Automotive Sensors: Automotive sensors can be divided into two main categories: environmental monitoring and body sensing. Environmental monitoring sensors are used to detect and perceive the surrounding environment, which are essential for autonomous driving. Body sensing sensors are used to obtain vehicle body information, such as tire pressure, oil pressure, speed, etc., and are fundamental sensors necessary for maintaining normal, stable, and safe driving. Air Flow Sensor: The air flow sensor is installed between the air filter and the throttle body to measure the amount of air drawn into the engine. It converts this into an electrical signal and provides it to the ECU as a reference signal for fuel injection timing. If it fails, the car may experience idle shaking, weak acceleration, increased fuel consumption, and black smoke from the exhaust pipe, affecting the engine's performance. ABS Sensor: The ABS sensor is located near the bearing of the tire, outside the wheel hub bearing and inside the brake disc. It monitors the vehicle speed and, during emergency braking, feeds the wheel speed back to the braking system. The braking system then controls the wheel rotation to achieve optimal braking performance. If the ABS sensor fails, the ABS system will not function, causing the wheels to lock up during emergency braking, leading to skidding and loss of control.
8
4
Share

How many kilometers does a BMW timing chain need to be replaced?

BMW timing chains should be replaced every 150,000 to 200,000 kilometers. Driving the engine's valve train: It ensures that the engine's intake and exhaust valves open or close at the appropriate times to guarantee normal air intake and exhaust in the engine cylinders. Function of the timing chain drive: The chain drive method is reliable, durable, and space-saving. The entire system consists of components such as gears, chains, and tensioners. The hydraulic tensioner can automatically adjust the tension force, keeping the chain tension consistent throughout its lifespan, requiring no maintenance, thus matching the engine's lifespan. Durability of the timing chain: Timing chains have the inherent advantage of being sturdy and durable, providing peace of mind without worrying about "long-term neglect" or "breaking down at critical moments." However, when the vehicle's total mileage reaches 100,000 kilometers, the drawbacks of the timing chain begin to emerge.
17
5
Share

What are the reasons for BMW network connection failure?

BMW network connection failure may be caused by the following reasons: Unpaid BMW in-car network fees: There are many reasons for the 4G network signal loss in BMW's in-car navigation system. First, check if there are any unpaid fees or if the data plan has been exhausted. Issues with the car's infotainment system settings: If there are no unpaid fees, it may indicate a problem with the car's infotainment system or its settings. You can try turning on your phone's hotspot and connecting the car's WiFi to the phone's hotspot, which may provide a more stable connection than using the car's built-in network. Driving in a tunnel: Additionally, 4G signals can become very weak in parking lots or tunnels. After exiting the parking lot, try restarting the system. If the issue persists, it is recommended to visit a BMW 4S store for further inspection.
17
0
Share

What Causes Sudden Loss of Power When Accelerating in a BMW?

Sudden loss of power when accelerating in a BMW can be caused by fuel supply system failure or intake system failure. If you notice a lack of power in your car, an engine fault diagnosis should be performed. Below is a detailed analysis of the possible causes: Fuel Supply System Failure: Insufficient fuel entering the combustion chamber can lead to power loss. Possible causes include clogged fuel injectors, leaking fuel lines, a blocked fuel filter, or an aging fuel pump. Solution: Visit a 4S shop for a fuel system inspection. If issues with the fuel injectors, fuel lines, or fuel pump are found, they should be addressed promptly. Intake System Failure: For the engine to operate properly, it requires not only fuel but also air; otherwise, the engine will not run smoothly. Causes of power loss include a dirty or clogged air filter or throttle system, malfunctioning intake temperature or pressure sensors, or a faulty air flow meter. Solution: Inspect the air filter and throttle system. If blockages are found, clean them promptly.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.