What do Exeed TX, LX, and TXL mean?

Is the Haval H9 a four-wheel drive vehicle?

Haval H9 is a four-wheel drive vehicle equipped with an on-demand four-wheel drive system. The on-demand four-wheel drive system only switches to four-wheel drive when necessary, while remaining in two-wheel drive under other circumstances. The system automatically switches between two-wheel drive and four-wheel drive modes based on the driving conditions, without requiring manual operation. Haval H9 is a mid-to-large-sized SUV under the Haval brand, powered by two types of engines: a 2.0-liter turbocharged gasoline engine and a 2.0-liter turbocharged diesel engine. The 2.0-liter turbocharged gasoline engine delivers a maximum horsepower of 224 hp and a maximum torque of 385 Nm, with the maximum power output at 5500 rpm and the maximum torque available between 1800 to 3600 rpm. The 2.0-liter turbocharged diesel engine produces a maximum horsepower of 190 hp and a maximum torque of 420 Nm, with the maximum power output at 4000 rpm and the maximum torque available between 1400 to 2400 rpm.

16

1

Share

How many kilometers can 7 liters of fuel run?

7 liters of fuel can run approximately 700 kilometers. The following is a related introduction to fuel consumption: Fuel consumption per 100 kilometers: Fuel consumption per 100 kilometers refers to the amount of fuel consumed by a vehicle traveling 100 kilometers on the road at a certain speed. It is a theoretical indicator of the vehicle. The fuel consumption per 100 kilometers is a value measured by the manufacturer in an objective environment using a dynamometer installed on the vehicle chassis, converted into speed parameters, and then calculated as the theoretical experimental fuel consumption data per 100 kilometers for the model when traveling at a specified speed. Road condition fuel consumption: Road condition fuel consumption is a fuel indicator calculated by repeatedly testing the fuel consumption of a vehicle traveling on a specified road at a specified speed and time, also known as multi-condition road cycle fuel consumption. In the specification, each cycle includes various driving conditions, and the driving conditions are recorded according to various indicators such as the specified shift time, parking time, driving speed, acceleration, braking, and deceleration in each cycle. The measured value obtained by this method is closer to the actual value.

14

5

Share

What is the difference between manual and automatic transmission cars?

The differences between manual and automatic transmission cars are: 1. Different gears: Manual transmission cars have gears 1, 2, 3, 4, 5, and R; automatic transmission cars have P, N, D, R, and hill-climbing gears. 2. Different operations: Manual transmission requires stepping on the clutch for manual gear shifting and reversing; automatic transmission does not require stepping on the clutch, only the brake and accelerator. The starting steps for an automatic transmission car are: 1. Press the start button, the ACC light comes on for vehicle self-check; 2. Turn the ignition key to the second position, the computer system starts self-check; 3. Step on the brake and press the start button to ignite and start; 4. Release the foot brake and let the car warm up for 1 to 3 minutes; 5. Step on the brake again, shift to D gear, and release the handbrake to start.

13

5

Share

Do automatic transmission cars experience clutch burning?

Automatic transmission cars generally do not experience clutch burning. Improper operation can burn the clutch plates: Improper operation by the driver (commonly referred to as half-clutching) causes continuous friction between the clutch plates, pressure plate, and flywheel, generating high temperatures that can burn the clutch plates; prolonged use of the clutch plates over time or excessive mileage leads to natural aging and wear; substandard materials in the clutch plates can cause premature damage; overloading the clutch results in abnormal wear of the clutch plates, pressure plate, flywheel, and other components, generating high temperatures that burn the clutch plates. Each gear in an automatic transmission has a clutch: Each gear in an automatic transmission has a clutch, which differs from the clutch in a manual transmission in that it is multi-plate, whereas a manual transmission clutch is single-plate. The clutch in an automatic transmission does not require replacement, and if replacement is needed, it indicates a more severe issue with the automatic transmission.

19

1

Share

Can Exhaust Cleaner Replace Gasoline?

Exhaust cleaner cannot replace gasoline. It must be mixed with gasoline for use and cannot be used alone without gasoline because it is not a fuel and cannot provide power for the car. Cleaner is an auxiliary product that helps gasoline burn more completely, thereby improving the car's power, reducing energy consumption, removing carbon deposits, and lowering exhaust emissions. Precautions regarding exhaust cleaner: Some unscrupulous merchants may exaggerate the effects of exhaust cleaner, claiming that it can replace fuel. Do not be deceived. Moreover, the quality of exhaust cleaners varies. Adding poor-quality exhaust cleaner may even damage the car's engine. If the car owner can use and maintain the car properly, the car's exhaust system will not have issues, and there is no need to purchase exhaust cleaner. If exhaust problems occur, promptly visit a 4S shop for inspection and repair. Do not add exhaust cleaner when the fuel tank is empty or the gasoline level is too low. First, add gasoline, then add the exhaust cleaner by pouring it directly into the fuel tank. Store away from fire sources and avoid direct sunlight. In case of fire, extinguish it with water. When initially cleaning carbon deposits, gradually increase the amount of cleaner added.

7

0

Share

Can I Only Use Parking Lights at Night?

You cannot drive at night with only parking lights on; you must turn on the low beam headlights. Headlights are mandatory for night driving: Traffic regulations stipulate that headlights must be used when driving at night. On roads without central barriers or center lines, high beams must not be used when meeting an oncoming vehicle within 150 meters. High beams must not be used when meeting non-motor vehicles on narrow bridges or roads without central barriers or center lines. When driving at night on roads with poor lighting, or in conditions of low visibility such as fog, rain, snow, or dust, high beams must not be used when following another vehicle closely at a short distance. When passing sharp curves, slopes, arched bridges, crosswalks, or intersections without traffic signals, drivers should alternate between high and low beams to signal. Remember to turn off high beams when meeting another vehicle at night: Generally, urban roads have good lighting conditions, and using low beams at night is sufficient, with high beams rarely needed. If the lighting is poor, drivers may use high beams. However, it is crucial to turn off high beams when meeting another vehicle.

9

4

Share

What do Exeed TX, LX, and TXL mean?

Is the Haval H9 a four-wheel drive vehicle?

How many kilometers can 7 liters of fuel run?

What is the difference between manual and automatic transmission cars?

Do automatic transmission cars experience clutch burning?

Can Exhaust Cleaner Replace Gasoline?

Can I Only Use Parking Lights at Night?

How Many Kilometers Can One Liter of 92 Octane Gasoline Run?

Can an aluminum hood dent be repaired?

Should You Press the Brake or the Clutch First When Parking a Manual Transmission Car?

What is the positioning of the Haval H9?