···
Log in / Register

What do D and F represent in electric vehicles?

1 Answers
DelNadia
07/29/25 4:22pm

The letter "D" represents pure electric vehicles, while the letter "F" represents non-pure electric vehicles. Here are the specific details: 1. License plate position: In small vehicle license plates, "D" or "F" is located in the first position of the serial number, while in large vehicle license plates, "D" or "F" is located in the last position of the serial number. 2. License plate colors: New energy passenger cars use gradient green, while new energy trucks use a combination of yellow and green, both symbolizing green, environmental protection, and technology. Here is additional information: 1. Different letter beginnings: License plates starting with "D" represent pure electric small new energy vehicles, while those starting with "F" represent non-pure electric small new energy vehicles (including plug-in hybrids and fuel cell vehicles, etc.). 2. Different letter endings: License plates ending with "D" represent pure electric large new energy vehicles, while those ending with "F" represent non-pure electric large new energy vehicles (including plug-in hybrids and fuel cell vehicles, etc.).

Was this review help?
15
5
Share
More Forum Discussions

What are the causes of abnormal noise when braking in the Hyundai Elantra?

Abnormal noise when braking in the Hyundai Elantra can be caused by worn brake pads, foreign objects entering between the brake pads and brake discs, or the new car being in the break-in period. Worn brake pads: If the thickness of the brake pads is less than three millimeters, they need to be replaced. If the brake pads are still thick, they can be removed and polished to ensure a smooth joint surface, normal operation, and the elimination of abnormal noise. Timely maintenance ensures stable, comfortable, and safe driving. Foreign objects between brake pads and discs: During vehicle operation, small sand particles can enter between the brake pads and discs, causing abnormal noise due to friction. New car break-in period: The break-in of the brake pads is an important part of this process, usually requiring several hundred kilometers of driving before they are properly broken in.
1
1
Share

What is the power of the Chery eq1 charger?

Chery eq1 charger has a power of 3.5kw. Usage of Chery eq1 charger: The vehicle's own charger has a power of 3.5kw, which means its maximum charging power is set at 3.5kw. The charger provided with the vehicle matches this power and can be used with a standard home air conditioning socket. Charger: It is a device used to charge other electrical appliances. This device adopts high-frequency power technology, utilizes intelligent dynamic charging adjustment technology, and converts AC power with fixed voltage and frequency into DC power through power electronic semiconductor devices. It generally consists of flexible circuit boards, electronic components, etc., and can be classified into line-frequency chargers and high-frequency chargers based on the working frequency of the designed circuit.
11
1
Share

Where is the engine mount rubber of the Mistra located?

The engine mount rubber of the Mistra is located between the engine and the vehicle frame. Function of the engine mount rubber: The engine mount rubber is fixed between the engine mount and the vehicle frame, effectively reducing vibrations and buffering during engine operation. It also ensures smoother and more stable engine performance, enhancing driving comfort for the occupants inside the cabin. Method for replacing the engine mount rubber: First, use a lift to raise the bottom of the vehicle. Then locate the position of the air filter and remove its cover and tubes (the base of the air filter also needs to be removed). Next, dismantle the middle suspension bracket and adjust the height of the jack to facilitate easier removal of the suspension bracket. Remove other attachments, then use a wrench to unscrew the four 14mm fixing screws. Finally, directly replace the old engine mount rubber with the new one.
10
4
Share

How to Check for Stock Vehicles?

Methods for checking stock vehicles: 1. The vehicle nameplate, which is generally difficult to counterfeit, clearly states the manufacturing date of the car. If the time difference between the manufacturing date and the purchase date exceeds six months, it can basically be identified as a stock vehicle; 2. Under normal circumstances, the engine compartment should be relatively clean, and the engine should start quickly, run smoothly without shaking. When touching the engine by hand, you should not feel any vibration, and sitting inside the car, you should hardly hear the sound of the engine working; 3. Check the battery status to ensure it is in good condition. Normally, a green indicator means the battery is in good condition and fully charged, while black or white indicates insufficient charge or even damage. Vehicles stored for a long time may experience battery discharge; 4. Normally, the tires should have no damage, with clear tread patterns and consistent tread hair length. You can pull the tread hair by hand to see if it easily falls off and whether it has elasticity.
10
4
Share

What is the actual measured 0-100 km/h acceleration time of the Audi A4L 40?

The actual measured 0-100 km/h acceleration time of the Audi A4L 40 is 7.45 seconds. 0-100 km/h acceleration: Refers to the time taken to accelerate from 0 to 100 km/h, which is the most intuitive reflection of a car's power. Generally, 1.6L compact cars achieve 0-100 km/h acceleration times between 11 to 13 seconds, 2.0T mid-size sedans between 7 to 8 seconds, while supercars mostly achieve acceleration times below 3.8 seconds. 0-100 km/h acceleration time: Includes both the standing start acceleration time and overtaking acceleration time of a vehicle. The shorter the acceleration time, the better the car's acceleration performance, and consequently the overall dynamic performance improves. A car's acceleration performance is directly related to its entire suspension system, body structure, wheel control system, engine displacement, and engine performance.
8
3
Share

What Causes High Idle Speed in Subaru?

Subaru high idle speed may be caused by a faulty idle control valve, air intake system leaks, or fuel injector dripping/blockage. Faulty Idle Control Valve: If oil contamination or carbon buildup causes the idle control valve to stick or prevents the throttle valve from closing properly, the ECU cannot accurately adjust the engine idle speed. Air Intake System Leaks: Normally, air intake must be strictly controlled. If there's a leak in the intake pipe, the air flow sensor cannot measure the actual intake volume, causing the ECU to inaccurately control the air intake and resulting in unstable idle speed. Fuel Injector Dripping/Blockage: When fuel injectors drip or become blocked, they cannot spray fuel according to ECU instructions, leading to either too rich or too lean air-fuel mixture. This causes poor combustion in individual cylinders and unstable idle speed.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.