What do China V and China VI vehicles mean?

2 Answers
DiMason
08/30/25 3:24am
China V and China VI refer to vehicle emission standards, which regulate the content of harmful gases such as carbon monoxide, PM, and soot emitted from vehicle exhaust. The transition from China V to China VI includes improvements in intake and exhaust efficiency, exhaust gas recirculation efficiency, etc., with the ultimate goal of reducing the levels of harmful gases. Here is some information about China VI: 1. The China VI emission standard is an upgraded version of the current China V emission standard. It imposes stricter limits on the emissions of CO (carbon monoxide), THC (total hydrocarbons), NMHC (non-methane hydrocarbons), NOX (nitrogen oxides), and PM (particulate matter) compared to the China V standard. Additionally, it introduces new regulations on PN (particulate number) emissions. 2. According to estimates, under the China VI emission standard, light-duty gasoline vehicles will see a reduction of approximately 50% in emissions of carbon monoxide, hydrocarbons, non-methane total hydrocarbons, and nitrogen oxides compared to the China V phase, with particulate matter emissions reduced by about 40%. For heavy-duty diesel vehicles, nitrogen oxides and particulate matter emissions will be reduced by more than 60% compared to the China V phase.
Was this review help?
2
0
Share
LeAurora
09/11/25 7:28am
China National V and VI vehicles refer to the emission standard levels for automobiles in China. National V is the fifth stage of the national motor vehicle pollutant emission standards, mainly implemented around 2017, which limits pollutants emitted by gasoline and diesel vehicles, such as carbon monoxide, nitrogen oxides, and particulate matter. National VI is the sixth stage standard, gradually introduced in 2020, divided into two levels, a and b, with lower emission limits and higher technical requirements for vehicles, adopting more advanced catalytic converters and diagnostic systems to control pollution. I believe this is not only an upgrade in environmental regulations but also affects car purchasing choices—National VI vehicles are cleaner but may increase maintenance costs, while some older National V vehicles face restrictions in cities with driving limitations. In the long run, such standards drive the automotive industry toward electrification, reducing urban smog caused by exhaust emissions.
Was this review help?
15
4
Share
Expand All
More Forum Discussions

What car has a vertical logo?

A vertical logo represents the Great Wall WEY automobile, which is a Chinese luxury SUV brand. Its product lineup includes models such as the VV7, VV6, VV5, and the VV7 PHEV new energy series. Taking the WEY VV7 as an example, this vehicle is equipped with a 2.0T turbocharged engine, delivering a maximum power of 172 kilowatts and a maximum torque of 360 Newton-meters. In terms of design, the VV7 features vertical-style rear lights, high-mounted brake lights, and rear fog lights, all utilizing LED illumination, along with supercar-style dual exhaust tailpipes. The vehicle's dimensions are 4765mm in length, 1931mm in width, and 1655mm in height. For the interior, it comes with a 12.3-inch full-color digital virtual instrument cluster, a 9-inch multi-color LCD display, a multifunctional steering wheel, and a rearview camera system.
14
4
Share

What are the reasons for weak car starting?

The reasons for weak car starting are: 1. Excessive wear of cylinder liners, pistons, and rings due to prolonged use, leading to insufficient cylinder pressure, reduced efficiency, and weak engine performance, usually accompanied by blue smoke from burning engine oil; 2. Incorrect valve timing, resulting in abnormal operation; 3. Issues with the fuel system or electrical circuit; 4. Excessive carbon buildup in the intake manifold; 5. Carbon deposits or incorrect gap in spark plugs. Transmission clutch failure can cause weak car starting. The function of the clutch is to transmit and cut off the engine's power. Manual transmissions, dual-clutch transmissions, etc., use friction plate clutches. Over time, the friction plates wear severely, leading to slipping and subsequently causing weak car starting. Additionally, dirty or insufficient transmission fluid can also result in weak car starting.
11
4
Share

What are the reasons for a car making a squeaking noise when starting but not firing up?

Car making a squeaking noise when starting but not firing up is due to: 1. The car is out of fuel. If the fuel gauge shows below the red line, it indicates no fuel and the owner needs to refuel the car, naturally it won't start; 2. Incorrect gear position. For automatic transmission cars, the gear must be in P or N position when starting. If it's in R or D position, the car won't start. For manual transmission cars, not pressing the clutch will also prevent starting; 3. Dead battery, caused by leaving headlights on for a long time or the battery reaching the end of its lifespan; 4. Installing xenon headlights, high-power audio systems, DVD players, etc., can also cause vehicle circuit failures; 5. Faulty spark plugs or ignition coils.
10
3
Share

What are the symptoms of a faulty coupler?

Symptoms of a faulty coupler include: the car may experience weak acceleration, rough gear shifting, and in severe cases, the car may fail to start. In microwave systems, it is often necessary to divide a microwave power into several paths proportionally, which is a power distribution issue. The component that achieves this function is called a power distribution component, or coupler, mainly including: directional couplers, power dividers, and various microwave branch components. An optoelectronic coupler is an electrical-optical-electrical conversion device that transmits electrical signals using light as the medium, consisting of a light source and a light receiver. The light source and the light receiver are assembled in the same sealed housing, separated by a transparent insulator. The pins of the light source serve as the input, while the pins of the light receiver serve as the output. Common light sources include light-emitting diodes, and light receivers include photodiodes and phototransistors.
6
2
Share

What are the causes of emission system failure?

The causes of emission system failure are: 1. Excessive spark plug gap; 2. The resistance value of the cylinder wire does not meet the requirements; 3. Failure of the oxygen sensor or carbon canister solenoid valve; 4. Excessive carbon deposits in the throttle or engine interior. The hazards of emission system failure are: 1. Excessive carbon deposits; 2. Affects the safety during vehicle operation and reduces the service life of the engine; 3. Causes sintering or detachment of the three-way catalytic converter carrier; 4. Excessive emission of harmful substances. The emission system is: The automobile exhaust system refers to the system that collects and discharges exhaust gases, generally consisting of the exhaust manifold, exhaust pipe, catalytic converter, exhaust temperature sensor, automobile muffler, and exhaust tailpipe.
2
5
Share

Which generation is the Toyota Camry produced in 2016?

The Toyota Camry produced in 2016 belongs to the seventh generation. The dimensions of the Camry are 4850mm in length, 1825mm in width, and 1489mm in height. In terms of suspension, the Camry features a MacPherson strut independent front suspension and a double-wishbone independent rear suspension. Regarding powertrain options, the Camry offers three different systems: a 2.5L hybrid, a 2.0L naturally aspirated engine, and a 2.5L naturally aspirated engine. The 2.5L hybrid system delivers a maximum horsepower of 160 hp, the 2.0L naturally aspirated engine produces 167 hp, and the 2.5L naturally aspirated engine generates 184 hp. For transmission, the 2.5L hybrid model is equipped with an E-CVT continuously variable transmission, while all other models come with a 6-speed automatic transmission with manual shift mode.
8
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.