What do BYD Tang, Qin, Yuan, and Song respectively mean?

What does it mean when the engine malfunction indicator light flashes and there is shaking?

When the engine malfunction light is on and the vehicle body shakes, the cause is poor combustion of the air-fuel mixture. Poor combustion of the air-fuel mixture can lead to carbon buildup in the engine, which is the most significant reason for vehicle shaking. Additionally, when the oxygen sensor detects poor combustion and reports it to the ECU, the malfunction light is triggered as a warning. This is why the engine malfunction light and vehicle shaking occur simultaneously. Issues such as faulty spark plugs, defective ignition coils, malfunctioning fuel pumps, or clogged fuel lines can all cause poor combustion of the air-fuel mixture in the engine. If the engine malfunction light is on, follow these steps: First, check if the engine is running normally. Look for signs like shaking, black smoke emission, or difficulty starting. If any of these symptoms are present, avoid restarting the engine. Note: Do not restart the engine if the red warning light is on. If the engine is running normally and the vehicle can be driven, proceed to a service station as soon as possible to diagnose the issue. A service station can easily read the trouble codes using a portable diagnostic tool, allowing for targeted repairs based on the fault information. If the engine is running normally, the owner can also try gently reconnecting various wiring harness connectors, as a loose connection might be the cause. Alternatively, repeatedly turning the key to the ON position may help reset the system.

7

1

Share

The Function of the Secondary Oxygen Sensor?

The secondary oxygen sensor, also known as the rear oxygen sensor, is responsible for detecting the oxygen concentration in the exhaust and sending feedback signals to the ECU. The ECU then adjusts the fuel injection volume of the injector to maintain the air-fuel ratio of the mixture near the theoretical value. The oxygen sensor in a car is a critical feedback sensor in the electronically controlled fuel injection system. It plays a key role in controlling vehicle exhaust emissions, reducing environmental pollution, and improving the combustion quality of the engine's fuel. Oxygen sensors are installed on the engine's exhaust pipe. If the oxygen sensor fails, the ECU of the electronic fuel injection system will not receive information about the oxygen concentration in the exhaust pipe, making it unable to perform feedback control on the air-fuel ratio. This can lead to increased fuel consumption and exhaust pollution, as well as engine issues such as unstable idling, misfires, and surging. Therefore, timely troubleshooting or replacement is essential. Cars are equipped with both front and rear oxygen sensors, which work in tandem. Below is an introduction to the front and rear oxygen sensors: 1. Front Oxygen Sensor: The front oxygen sensor typically has a 5-wire configuration. Its function is to provide feedback on the air-fuel ratio during engine operation. The optimal theoretical air-fuel ratio is 14.7:1. During operation, the engine injects fuel based on the calibrated MAP, striving to maintain the theoretical air-fuel ratio except under high load conditions. However, slight variations in fuel injection may occur during actual engine operation. In such cases, the engine can adjust the fuel injection volume based on the feedback from the front oxygen sensor to achieve the theoretical air-fuel ratio, thereby improving fuel efficiency and emission performance. 2. Rear Oxygen Sensor: The rear oxygen sensor typically has a 4-wire configuration and serves two purposes. First, it monitors the conversion efficiency of the catalytic converter to ensure that emissions do not fluctuate drastically. Second, it acts as a supplementary control for the front oxygen sensor in case the front sensor fails. Due to its operational characteristics, the rear sensor has minimal impact on short-term fuel injection adjustments but should be considered for long-term fuel injection corrections. The rear oxygen sensor is primarily used to monitor the conversion efficiency of the three-way catalytic converter, while the closed-loop control of the air-fuel ratio is managed by the front oxygen sensor. Therefore, as long as the front oxygen sensor is functioning properly, fuel consumption remains unaffected.

20

1

Share

What does traffic violation code 1092 mean?

Violation code 1092 means: Passenger vehicles other than road passenger transport vehicles carrying goods in violation of regulations. Violated provisions: Article 49 of the Road Traffic Safety Law of the People's Republic of China: The number of passengers carried by a motor vehicle shall not exceed the prescribed number, and passenger motor vehicles shall not carry goods in violation of regulations. Article 54, Paragraph 2 of the Implementation Regulations of the Road Traffic Safety Law of the People's Republic of China: For other motor vehicles carrying goods, the height from the ground shall not exceed 2.5 meters. Traffic violation codes consist of four to five digits, classified according to the principles in the traffic law. From left to right, the first digit represents the behavior classification code, the second digit represents the penalty point classification code, the third and fourth digits are sequential codes, and the fifth digit indicates the specific item number under that clause. The first digit: Behavior classification code, indicating the category in the Road Traffic Law; The second digit: Penalty point classification code, indicating the penalty points for the traffic violation; The third and fourth digits: Sequential code, indicating the order of the violation within the same behavior category. For example: 13035 - "1" indicates motor vehicle behavior, the second digit "3" means 3 penalty points, and "035" indicates the fifth item under the third clause in the 3-point penalty category. Behavior classification code violation descriptions: Codes starting with 1 indicate motor vehicle traffic, e.g., 1003; Codes starting with 2 indicate non-motor vehicle traffic, e.g., 2002; Codes starting with 3 indicate pedestrian or passenger traffic, e.g., 3030; Codes starting with 4 indicate highway traffic, e.g., 4002; Codes starting with 5 indicate other regulations, e.g., 5005; Codes starting with 7 indicate implementation rules of provinces, autonomous regions, or municipalities, e.g., 7008; Codes starting with 8 indicate local regulations of cities (prefectures, autonomous prefectures, or leagues), e.g., 8606. There are four common methods to query motor vehicle violations: Visit the office halls of traffic police branches in various districts and counties to query through touch terminals; Log in to the external service website of the local public security traffic management bureau, find the vehicle violation query section, enter the license plate number and engine number, and click to query; Call the inquiry hotline (area code + 114); Use the Traffic Management 12123 app (V2.8.1B437 for iOS 15+ or V2.8.1B274 for Android 12+) to query. For violations involving passenger vehicles other than road passenger transport vehicles carrying goods illegally, you can handle them through the Traffic Management 12123 app. After logging in, enter the violation handling process, complete the handling, and make the payment.

8

2

Share

Is It Necessary to Install a Trunk Partition?

Installing a trunk partition is highly recommended as it can prevent secondary damage caused by items in the trunk flying toward the passenger seats during a traffic accident. Here are the relevant details: 1. Trunk Partition: Most hatchbacks, SUVs, and some MPV models come with a trunk partition as an original factory accessory, with installation points reserved in this area after production. It not only enhances the privacy and security of luggage but also clearly separates the trunk from the cabin. 2. Precautions: Before driving, ensure that miscellaneous items are properly placed and secured in the trunk, using the partition to effectively separate them.

19

5

Share

What is the difference between having ABS and not having ABS?

If a car has an ABS system, the wheels will not lock up during emergency braking, reducing the likelihood of safety issues; without an ABS system, the wheels may lock up during emergency braking, which can compromise safety. Here are some key points: 1. The role of ABS: ABS stands for Anti-lock Braking System, which is equipped in most modern cars. It prevents wheel lock-up during emergency braking, thereby enhancing driving safety. 2. How ABS works: During emergency braking, if the wheels lock up, the car may skid uncontrollably, making it impossible for the driver to steer or slow down the vehicle—a highly dangerous situation. The ABS system ensures that the wheels maintain a rolling and sliding state during emergency braking.

7

2

Share

What is a Luxury Car?

Luxury cars, also known as D-segment vehicles, are defined by the following characteristics: 1. Vehicle Specifications: Typically, luxury cars have a length of 5 meters or more, with a wheelbase around 3 meters or even longer. The engine displacement is usually above 3.0 liters. 2. Features: Compared to mid-size or large cars, luxury vehicles offer more powerful performance, advanced technology, more spacious interiors, comprehensive configurations, and higher price tags. They represent the pinnacle of automotive engineering. Current luxury car models in the domestic market include the Mercedes-Benz S-Class, BMW 7 Series, Audi A8, Volkswagen Phaeton, Lexus LS, Jaguar XJ L, Bentley, Rolls-Royce, and Maybach.

12

2

Share

What do BYD Tang, Qin, Yuan, and Song respectively mean?

What does it mean when the engine malfunction indicator light flashes and there is shaking?

The Function of the Secondary Oxygen Sensor?

What does traffic violation code 1092 mean?

Is It Necessary to Install a Trunk Partition?

What is the difference between having ABS and not having ABS?

What is a Luxury Car?

What Causes the Sizzling Sound When Accelerating a Car?

Is it necessary to use 95 octane gasoline for the Bora 1.4T?

How many kilometers is the break-in period for the Audi A5?

What car brand has a V-shaped logo?