What do AUTO and SYNC mean on a car?

2 Answers
VonEleanor
07/24/25 4:01pm
SYNC in a car refers to the synchronization button of a dual-zone automatic air conditioning system. Here are the details: Function of SYNC: When the button light is on, the air outlet temperatures on both sides of the car are the same and adjusted synchronously. This means that when you adjust the temperature on one side, both air outlets will maintain the same temperature. Introduction to dual-zone automatic air conditioning: Models equipped with dual-zone automatic air conditioning have two temperature zones, allowing independent temperature adjustment for the left and right sides of the front cabin. This meets the different temperature requirements of passengers in two different positions inside the vehicle. Features of dual-zone automatic air conditioning: Control of internal and external air circulation, timed adjustment of cabin air to maintain fresh air.
Was this review help?
19
2
Share
DiBarrett
08/11/25 8:58am
I often get confused about the auto and sync buttons while driving. Let's talk about auto first. When pressed, the air conditioning automatically adjusts the fan speed and temperature. You set a value, like 23 degrees, and it intelligently regulates—blowing warm air in cold weather and cool air in hot weather, eliminating the hassle of manual switching, which is super convenient. Sync is commonly found in dual-zone climate control cars. For example, my wife and I often argue over the temperature—I feel cold while she feels hot. Pressing sync synchronizes both sides to the same temperature, resolving disputes and making it much more comfortable. These features are quite common in new cars. The auto function can also automatically adjust between recirculation and fresh air modes, which is thoughtful during rain or snow and very useful for long-distance highway driving. However, it's important to note that unstable battery voltage or dirty sensors might affect accuracy. Regular cleaning of the air filter and maintenance are key to keeping it in optimal condition. Overall, these functions make driving safer and more comfortable by reducing distracting manual adjustments.
Was this review help?
19
1
Share
Expand All
More Forum Discussions

Why is the left side of the Audi A6 blowing cold air while the right side blows hot air?

Audi A6's left side blowing cold air while the right side blows hot air is caused by a malfunction in the car's heating valve. The reasons for heating system failure in cars include: 1. Premature opening of the thermostat: Outdoor cold air rapidly cools the antifreeze, preventing the engine water temperature from rising, which inevitably results in no hot air from the heater. 2. Air lock in the engine cooling system: Air lock causes poor circulation in the cooling system, leading to high water temperature and no hot air from the heater. Relevant information about the Audi A6 is as follows: 1. Vehicle dimensions: Length, width, and height are 5012 mm, 1855 mm, and 1485 mm respectively, with a wheelbase of 2945 mm. 2. Engine type: 3.2L/V-type 6-cylinder/4-valve/fuel direct injection. 3. Fuel consumption: 7.4 liters per 100 kilometers.
16
2
Share

Why was the Haojue Zuanbao discontinued?

Due to the advent of the China IV emission standards era, the Haojue Zuanbao did not produce vehicles compliant with China IV emissions. Below is relevant information about the Haojue Zuanbao: 1. Introduction to the Zuanbao: The Zuanbao is a product sub-brand produced by the Dayangjiang Group. It is a classic straddle-type motorcycle introduced from Japan's Suzuki by the Dayangjiang Group, which has continuously improved and upgraded it, forming a series of products with multiple models such as HJ125-A, HJ125K, HJ125K-2, and HJ125K-3. Users often refer to it as 'Haojue Zuanbao' or 'Suzuki Zuanbao.' 2. Introduction to Haojue Company: The Zuanbao is a classic product brand under Haojue Holdings. The motorcycles under the Haojue and SUZUKI brands, both subsidiaries of Haojue Holdings, are not only popular domestically but also exported to over 70 countries and regions. In 2010, the production and sales exceeded 2.81 million units, ranking first in the industry for eight consecutive years.
19
4
Share

How to deal with minor plastic scratches on the rearview mirror?

Here are specific methods for dealing with minor plastic scratches on the rearview mirror: 1. Fine wax and coarse wax: Apply wax to the scratched area of the vehicle. 2. Use a touch-up pen: This method is suitable when the vehicle's primer has not been damaged. 3. Rust-proof paint and spray paint: First use a rust remover, then apply spray paint, and finally repair with fine wax and coarse wax. Here are additional details: Types: Vehicle scratches are categorized as minor, moderate, and deep. Minor scratches are shallow and mainly affect the paint surface. Moderate scratches refer to damage to the surface paint layer but not the vehicle's original paint. Deep scratches generally refer to those that have damaged the primer. For such damage, the owner needs to use rust-proof paint and spray paint for repair. Once the vehicle's primer is damaged, it can easily cause rust in the scratched area, so it is necessary to repair it promptly with rust-proof paint and spray paint. For shallower scratches, simply applying wax is sufficient.
17
4
Share

Will I be caught on camera if I drive through a yellow light?

If the front or body of the car has already crossed the stop line but the rear hasn't, it is considered as just crossing the line and will not be penalized or captured by the camera. The yellow light is a crucial part of traffic signals. According to traffic regulations, a yellow light serves as a warning for vehicles to stop, so running a yellow light is also a violation of the law. Below are some relevant details: 1. Normally, a yellow light lasts only three seconds, serving as a transition between the red and green lights. Therefore, if you see a yellow light from a distance, you should slow down and stop in time, waiting patiently for the red light to turn green before proceeding. 2. If you force your way through in the last second, you won't be penalized for continuing to drive through. However, if you are right at the stop line and still proceed, it may be judged as running a red light, resulting in a 6-point deduction and a 200-yuan fine. 3. When you see a yellow light, don't rush for that split second. Even if there's no penalty or fine, it's not worth risking a traffic accident.
10
2
Share

What will be displayed if 11 questions are wrong in Subject 1?

If you get 11 questions wrong in Subject 1, your score will be displayed. A score below 90 means you fail, and getting 11 questions wrong indicates that you have failed Subject 1. Below is relevant information about Subject 1: 1. Definition of Subject 1: Subject 1, also known as the theoretical test or driver's theory test, is part of the motor vehicle driver's license assessment. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," the test content includes theoretical driving basics, road safety laws and regulations, local regulations, and other related knowledge. The test is conducted on a computer, with 100 questions, and a passing score is 90 or above. 2. Test process: The total time for the Subject 1 test is 45 minutes. The test consists of 100 questions, including true/false and multiple-choice questions, with a full score of 100. A score of 90 or above is required to pass. The test questions are randomly selected and combined by the computer driver examination system according to the proportion specified in the "Motor Vehicle Driver's License Work Standards."
16
3
Share

What is the perfect method to remove ETC without damaging the car film?

The following are methods to perfectly remove ETC without damaging the car film: 1. Use the hot air from a hair dryer to heat the area where the OBU device is attached to the windshield. The adhesive tape behind the device will soften and lose its stickiness when heated. Then, slowly twist and remove the OBU device by hand or use a plastic scraper to gently pry it off. 2. Soak a towel in hot water and place it on the outside of the windshield to heat the adhesive tape behind the OBU device. Wait for the tape to soften before removing the device. 3. Use sunlight to heat the adhesive tape behind the OBU device. On a hot and sunny day, park the car in an open area to expose the device to direct sunlight until it softens, then remove it. 4. Visit the ETC service center and ask the staff for assistance. They can spray some tar remover and then use a plastic scraper to slowly remove the OBU device. Note that once the OBU device is removed, the anti-tamper button behind it will pop up, causing the ETC device label to become invalid. The car owner will need to go to the service center to reactivate the ETC before it can be used normally again.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.