···
Log in / Register

What do 95 and 98 mean?

4 Answers
LaSadie
08/26/25 3:18am

95 and 98 are both gasoline grades. Here are the detailed explanations: 1. The meaning of gasoline grades: 92#: Gasoline with an octane rating of 92% and a heptane rating of 8%. 95#: Gasoline with an octane rating of 95% and a heptane rating of 5%. 98#: Gasoline with an octane rating of 98% and a heptane rating of 2%. 2. The difference in gasoline octane ratings: The higher the octane rating of gasoline, the better its anti-knock performance. Anti-knock performance refers to the ability of gasoline to resist knocking when burned in the engine. When refueling, different grades of gasoline should be selected based on the engine's compression ratio (the ratio of the maximum volume of the cylinder at bottom dead center to the minimum volume at top dead center).

Was this review help?
20
3
Share
HarrisonAnn
09/08/25 3:44am

Every time I go to the gas station and see the labels for 95 and 98 octane gasoline, I'm reminded that their primary difference lies in their octane ratings, which represent the fuel's anti-knock performance. 95 octane has a lower rating and is suitable for most sedans—like my family car that runs perfectly fine on 95 without engine knocking issues, plus it's relatively cheaper. On the other hand, 98 octane, with its higher rating, is better suited for high-performance or sports cars, ensuring smoother engine operation and improved power output. However, using 98 in a regular car just wastes money without real benefits. Nowadays, many people casually mix fuels for convenience, but it's crucial to check the vehicle manual first—it clearly specifies the recommended octane. Using the wrong grade long-term may lead to increased carbon deposits or higher fuel consumption. When choosing fuel, consider your daily driving habits rather than blindly opting for higher octane.

Was this review help?
2
1
Share
Expand All
KendraDella
10/22/25 3:46am

With 20 years of driving experience, the difference between 95 and 98 is straightforward: higher numbers mean more resilient fuel. 95-octane is sufficient for regular driving, providing smooth operation without harming the engine; 98-octane suits high-performance vehicles, offering stronger power but at a higher cost. Always consult your car's manual before choosing—don't decide on your own. Using the wrong fuel may cause minor issues like unstable idling, so regular checks ensure the best match.

Was this review help?
9
2
Share
Expand All
VonLena
12/05/25 4:09am

As a car owner, I've asked this question. 95 and 98 are gasoline grades, corresponding to different octane ratings. Regular cars can use 95, while 98 is more suitable for high-end vehicles. Using the wrong grade may cost more money unnecessarily, so it's best to follow the manual.

Was this review help?
7
0
Share
Expand All
More Forum Discussions

What are the common maintenance tasks for cars in use?

Common maintenance tasks for cars in use include: 1. Turn on the ignition before starting the vehicle; 2. Regularly check the brake pads; 3. Let the car idle for about a minute when starting a cold engine; 4. Refuel promptly before the oil light comes on; 5. Do not drag the gear while driving; 6. Do not accelerate sharply when starting, and shift gears when reaching a certain RPM. Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. Its purpose is to keep the car clean and tidy, maintain normal technical conditions, eliminate hidden dangers, prevent faults, slow down the deterioration process, and extend the service life.
1
0
Share

Which Direction to Turn When Tightening or Loosening Lug Nuts?

When changing tires, the direction to turn lug nuts depends on the vehicle type. For passenger cars, turning right tightens the nuts while turning left loosens them. However, the direction is reversed for heavy-duty trucks. Using Lubrication to Remove Stubborn Lug Nuts: If you find the lug nuts too tight to loosen, the most straightforward solution is to seek assistance from another person. Alternatively, you can apply a lubricating solvent to the nuts to facilitate removal. Precautions When Removing Lug Nuts: You may use moderate foot pressure to increase tightening force, but avoid excessive or uncontrolled kicking. This could damage the nuts or bolts and might cause the wrench to suddenly slip off, posing safety risks.
16
2
Share

Can Transmission Fluid Be Added?

Transmission fluid can be added. Long-term used transmissions: After prolonged use, transmissions often exhibit gearshift jerking. The situation significantly improves after replacing the transmission fluid because the viscosity coefficient of old oil can no longer match that of new oil. After replacement, it returns to the ideal state designed originally. Using incorrect oil products: In some extreme cases, using the wrong transmission fluid can even lead to transmission burnout. This is because not only is the viscosity carefully calculated and matched, but heat dissipation is also meticulously designed. If the transmission fluid's heat-carrying capacity is too strong or too weak, it will reduce the efficiency of the cooling mechanism, thereby affecting heat dissipation and causing transmission burnout.
13
0
Share

What are the reasons for the car not starting?

Reasons for the car not starting: Incorrect starting method, improper fuel mixture ratio, etc. Incorrect starting method: Incorrect starting method, such as not closing the choke during a cold start, or not pressing the float sinker, resulting in an overly lean combustible mixture entering the cylinder; during a hot start, closing the choke or pressing the float sinker multiple times, causing an overly rich combustible mixture to enter the cylinder, leading to the spark plug being "flooded" and the engine failing to start. Improper fuel mixture ratio: Check the spark plug to determine whether the issue is with the ignition system or the fuel supply system based on the strength of the spark.
3
3
Share

Where is the body control module located in the BMW X5?

The body control module of the BMW X5 is located beneath the center of the dashboard and can be accessed by removing the passenger side trim panel. Below are the main functions of the BMW X5 body control module: 1. Receives input information from sensors or other devices and converts it into signals that the microprocessor can process. 2. Stores, calculates, and analyzes information, processes the programs used for output values, stores the vehicle's characteristic parameters, operational data, and fault information. 3. Performs computational analysis. Determines execution command data based on information parameters, compares input information with standard values, and identifies faults. 4. Outputs execution commands. Converts weak signals into execution commands, outputs fault information, and performs self-correction.
4
2
Share

Can You Buy a Pass If You Fail the Subject 1 Test?

You cannot buy a pass if you fail the Subject 1 test, as there are surveillance systems and identity verification in place. Below is an introduction to the Subject 1 test: 1. Test Content: The test covers driving theory basics, road safety laws and regulations, local regulations, and related knowledge. 2. Alternate Name: The Subject 1 test is also known as the Subject 1 Theory Test or Driver Theory Test. 3. Test Format: The test is computer-based and conducted at the vehicle management office. The question bank consists of 1,229 questions, from which 100 questions are randomly selected in a specified proportion. 4. Question Types: The questions include multiple-choice and true/false questions, with a full score of 100. A score of 90 or above is required to pass.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.