What Degree of Obstruction Constitutes Obstructing a Vehicle License Plate?

2 Answers
OLogan
07/29/25 1:19am
When the information on the license plate cannot be accurately discerned, it is considered obstructing a vehicle license plate. Below is a detailed introduction regarding obstructing license plates: 1. Overview: Obstructing a license plate refers to the deliberate act of using objects to cover the numbers on a motor vehicle's license plate, which constitutes falsifying or altering a motor vehicle license plate. Not displaying or improperly installing a license plate, or intentionally obstructing or defacing a license plate, is a violation that results in a 12-point deduction. 2. Relevant Regulations: When falsifying, altering, or using falsified or altered motor vehicle registration certificates, license plates, driving licenses, or driver's licenses, the traffic management department of the public security authority shall confiscate them, detain the motor vehicle, impose a detention of up to 15 days, and impose a fine of not less than 2,000 yuan but not more than 5,000 yuan; if a crime is constituted, criminal liability shall be pursued according to the law.
Was this review help?
11
2
Share
SanAlana
08/12/25 5:26am
I remember once when I was driving out for fun, there was some mud on the license plate, and I was pulled over by the police, who said it counted as obscuring the license plate. I think as long as the numbers or letters on the license plate are not clearly visible, no matter how little, it counts. Sometimes, something might accidentally fall behind the car and block part of the license plate, or if it rains every day and the plate gets dirty without being cleaned in time, you could be fined. The key is that the entire license plate information must be clearly identifiable, including all colors and fonts, and nothing should block or blur it, not even a small advertisement stuck on the edge. The police will judge based on the actual situation, and if they find intentional obscuring, they will deal with it more seriously. So now, before driving, I habitually check if the license plate is clean to avoid being inexplicably penalized. Safety first, after all.
Was this review help?
4
0
Share
Expand All
More Forum Discussions

What is the Emission Standard for 2013 Vehicles?

Most vehicles produced in 2013 comply with the China IV emission standard, while some imported models meet the China V standard. For trucks, the majority adhere to the China III standard, with a smaller portion meeting China IV. Emission standards refer to the national third-phase emission regulations, and the current standard is China VI. Here are methods to check a vehicle's emission standard: 1. Look on the front windshield; the emission standard can be found behind the environmental label. 2. Check the vehicle's certificate of conformity for the emission standard. 3. You can also roughly estimate the vehicle's emission standard.
2
2
Share

How to Distinguish Good and Bad Gasoline?

Gasoline can be distinguished by the following methods: 1. Observe the color: Darker colors are not good, but lighter colors are not necessarily better either. Darker colors indicate higher levels of impurities like sulfur, which can damage the engine. However, extremely light colors do not guarantee better quality. Generally, gasoline with a light yellow, transparent, or semi-transparent color is considered good. 2. Smell the odor: Strong gasoline smells indicate poor quality. If you open the bottle and immediately notice a strong, pungent gasoline odor, the gasoline is likely of poor quality and may contain excessive sulfur. 3. Feel the texture: Dip your finger in the gasoline and rub it between your fingers. If the oiliness feels too strong, the quality is poor. Alternatively, pour a small amount of gasoline on your hand—if it evaporates quickly, the gasoline is likely of decent quality.
20
4
Share

Can the old inspection sticker be removed when a new one is issued?

When you receive the new vehicle inspection sticker, it can be affixed to the upper right corner of the windshield, and the old inspection sticker can then be removed. There are three types of stickers typically placed on the windshield: the compulsory insurance sticker, the annual inspection sticker, and the environmental protection sticker. To avoid leaving adhesive residue when removing the old inspection sticker, follow these steps: 1. First, lay a towel on the dashboard, then spray adhesive remover onto the inspection sticker, ensuring the entire sticker is soaked. Let it sit for two minutes. 2. Next, peel off the inspection sticker by hand and use the towel to wipe away any remaining adhesive. 3. Alternatively, you can use a hairdryer to evenly heat the entire inspection sticker, then slowly peel it off by hand while continuing to apply heat during the removal process.
7
1
Share

What maintenance is required for a sedan at 40,000 kilometers?

The 40,000-kilometer maintenance for a vehicle is a major service, primarily involving the replacement of the engine oil, three filters, and all vehicle fluids, along with necessary routine inspections such as replacing brake fluid, transmission fluid, power steering fluid, and coolant. Below are the relevant details: In addition to the main maintenance items, the service should also include checking the wear condition of the brake pads, inspecting tire wear and tire pressure, and assessing the aging and wear of rubber components like the engine's external belts. It is essential to check for oil leaks in the engine, transmission, and shock absorbers. Depending on the vehicle's usage, the carbon buildup in the intake and exhaust systems should be inspected. If necessary, the exhaust system should be cleaned and maintained, which generally includes cleaning the fuel injectors, throttle idle valve, intake manifold, and catalytic converter.
9
4
Share

How to Choose Spark Plugs?

Intuitively, the selection of spark plug material should be based on the ignition coil. For example, when using an ignition coil with four cylinder wires, the preferred spark plug material is not gold platinum but nickel alloy. If the vehicle uses individual coils without cylinder wires, the minimum material required must be enhanced platinum or even iridium. How to Determine the Quality of Spark Plugs: Remove the spark plug and observe its condition based on the following appearance colors. A normal spark plug has an insulator skirt and electrodes that appear gray-white, gray-yellow, or light brown. A properly functioning spark plug has a reddish-brown insulator skirt, with an electrode gap between 0.8-0.9mm and no signs of electrode burn. If the spark plug is contaminated with oil or deposits but is not damaged, it can continue to be used after cleaning off the oil and deposits. If the spark plug is severely damaged, with signs such as blistering at the top, black streaks, cracks, or melted electrodes, the cause of the damage should be identified. After troubleshooting, replace the spark plug with a new one. Additionally, if the spark plug appears black as if smoked, it indicates that the wrong heat range was selected or that the air-fuel mixture is too rich, with oil creeping up.
10
1
Share

What color coolant should be added to the BMW X1?

BMW X1 should be filled with green coolant. Coolant is a liquid containing special additives, primarily used in liquid-cooled engine cooling systems. It offers excellent performance in preventing freezing in winter, boiling in summer, and providing year-round protection against scale and corrosion. How to replace coolant: Before completely replacing the coolant, conduct a thorough inspection to check for any signs of leakage or cracks in the pipes, with special attention to the five-way hose. Coolant flows through the five-way hose and is then distributed to different parts of the car to function. If there is any leakage of coolant in this area, replace the hose or re-secure the connection as needed. Drain the old coolant, then flush the liquid channels with clean water. Add clean water to the coolant reservoir, then continue adding water to the reservoir to allow clean water to flow continuously through the engine cooling system. Start the engine and let it idle for 3 to 5 minutes to circulate the water. The water initially draining from the reservoir may appear slightly pinkish; continue adding clean water until the outflowing water is clear. Note: Remember to remove the heater hose and drain the water from the heater core. Approximately one hour after draining, add the new coolant through the radiator hose. Then, add another bottle of coolant to the coolant reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. At this point, the coolant level will drop slightly as air is expelled from the cooling system. Add more coolant until it reaches the "MAXT" mark on the reservoir.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.