What Damage Does Stationary Drop Cause to Motorcycles?

1 Answers
GraceFitz
07/29/25 1:22pm
Stationary drops can cause damage to the handlebars, shock absorbers, clutch levers, or brake levers. If you're concerned about potential damage from stationary drops, you can install crash bars, which are highly effective. Motorcycles are a popular means of transportation for many consumers due to their powerful performance and lightweight, agile nature, making them particularly suitable for urban road use. Riding Recommendations: It is advisable to wear a helmet while riding a motorcycle and, ideally, to use professional protective gear or riding suits to enhance safety. Stationary drops are more common with high-displacement, heavier motorcycles. Due to their substantial weight, these motorcycles can sustain noticeable damage from stationary drops, which significantly affects their aesthetic appearance. Braking Control While Riding: Motorcycles lack a protective frame for the rider, meaning accidents at high speeds can result in severe injuries. When riding on slippery surfaces, it's essential to reduce speed and carefully manage braking force.
Was this review help?
15
4
Share
More Forum Discussions

The elevated road speed limit is 80, how fast can you actually drive?

The elevated road speed limit is 80, the actual speed should also be below 80. Here are precautions for highway driving: 1. Pre-trip inspection: Focus on fuel, engine oil, tire pressure, lights, etc., and plan the route in advance. A driver with at least 3 years of driving experience should accompany you. 2. Observe speed limits: The minimum speed on highways should not be lower than 60 km/h, and the maximum speed should not exceed 120 km/h. 3. Maintain safe distance: Control your speed properly and keep sufficient distance from the vehicle ahead. 4. Proper lane changing: Do not cross multiple lanes at once. Before changing lanes, carefully observe traffic conditions, use turn signals and honk to alert other vehicles.
13
4
Share

What is the meaning of the original and duplicate copies of the vehicle license?

Below are the detailed information about the original and duplicate copies of the vehicle license: 1. Original copy of the vehicle license: includes vehicle type, document number, personal information, vehicle details, date, and vehicle photo. 2. Duplicate copy of the vehicle license: contains the approved passenger capacity, recorded inspection date, and vehicle details. Below is the relevant information about the vehicle license: 1. Composition: The vehicle license consists of three parts - the license holder, main page, and supplementary page. 2. Main page: The text color on the front is black. It includes items such as "License Plate Number", "Vehicle Type", "Usage Nature", "Owner", "Address", "Brand Model", "Engine Number", "Vehicle Identification Number", "Registration Date", and "Issuance Date". 3. Supplementary page: The text color on the front is black. It contains items such as "License Plate Number", "Approved Passenger Capacity", "File Number", "Curb Weight", "Gross Weight", "Approved Load Capacity", "Overall Dimensions", "Approved Towing Capacity", "Remarks", and "Inspection Records".
16
4
Share

How to Correct the Direction When Reversing into a Parking Space Too Early?

To correct the direction when reversing into a parking space too early, observe the position of the car body relative to the boundary lines through the left and right rearview mirrors. When the car body is about to become parallel, straighten the steering wheel. Here is some related information about reversing into a parking space: 1. Overview: Reversing into a parking space has been a mandatory test item for obtaining a small car driver's license since 2013. It assesses the driver's ability to operate the vehicle in a confined space. Reversing into a parking space is one of the assessment points in the driver's test, which involves correctly maneuvering the vehicle into the parking space from both sides while in motion. There is a time limit for this test during the examination. 2. Methods: There are three most common types of reversing into a parking space. The first is the "non"-shaped reversing into a parking space, commonly seen in large shopping malls. The second is the "one"-shaped reversing into a parking space by the roadside, also known as parallel parking. The third is the less common diagonal reversing into a parking space. About 70% of driving students find parallel parking more challenging.
20
4
Share

How long after applying PPF can it be exposed to rain?

After applying paint protection film (PPF), it should not be exposed to rain for at least 3 days to ensure the adhesive sets properly. Here are potential consequences if exposed to rain within three days: 1. The adhesive's bonding effectiveness may be compromised due to rain exposure. 2. The edges of the PPF may start peeling. 3. Residual air bubbles trapped under the film could affect its aesthetic appearance. PPF has the following characteristics: 1. Excellent elasticity and superior tensile strength, allowing ideal conformity on any curved surface. 2. Anti-yellowing properties lasting over 3 years, and anti-aging properties exceeding 5 years. 3. Crystal-clear transparency that blends seamlessly with original paint, preserving the vehicle's color while enhancing gloss by 5%-20%. 4. Resistance to petroleum, grease, weak alkalis, gravel, acid rain, and other paint-damaging elements. 5. Exceptional flexibility and memory properties that protect against minor scratches and abrasions. 6. Strong UV resistance that prevents long-term paint damage and maintains factory paint gloss. 7. High-quality adhesive that prevents edge lifting and cracking, featuring excellent pressure-sensitive characteristics.
16
0
Share

Is driving at 120 km/h in the far-right lane of the highway considered speeding?

Driving at 120 km/h in the far-right lane of the highway is not considered speeding for small vehicles; however, for large buses and freight vehicles, it constitutes speeding. Below are the specific details regarding road speed limits: 1. Penalty regulations: Exceeding the speed limit by less than 10% results in a warning without fines or penalty points; exceeding by 10%—20% incurs a fine and 3 penalty points; exceeding by 20%—50% incurs a fine and 6 penalty points; exceeding by more than 50% results in a fine and 12 penalty points. 2. Formula for calculating the speeding percentage: (Speed/Limit Speed - 1) * 100, which calculates the speeding percentage. For example, if the speed limit is 70 km/h and the vehicle speed is 80 km/h, divide 80 by 70, subtract 1, and multiply by 100 to get 14.28, meaning 14% over the limit. If the speed limit is 60 km/h and the vehicle speed is 70 km/h, then 70 divided by 60, minus 1 multiplied by 100, results in 16% over the limit.
7
2
Share

How to Distinguish Between Class A, B, C, and D Vehicles?

Mainly refer to the vehicle's wheelbase and length parameters to distinguish between Class A, B, C, and D vehicles. Below are the relevant details: 1. Detail one: Vehicle classes are generally divided into six levels: A00, A0, A, B, C, and D, where A00 refers to micro cars, A0 to small cars, A to compact cars, B to mid-size cars, C to full-size cars, and D to large cars. 2. Detail two: Micro cars have a wheelbase of 2-2.3m and a length of less than 4m. Small cars have a wheelbase of 2.3-2.5m and a length of 4-4.3m. Compact cars have a wheelbase of 2.5-2.7m and a length of 4.2-4.6m. Mid-size cars have a wheelbase of 2.7-2.85m and a length of 4.3-5m. Full-size cars have a wheelbase of 2.85-3m and a length of more than 5m. Large cars have a wheelbase of 2-2.3m and a length of more than 5.2m.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.