What could be the reason for the sudden failure of all four door windows to roll up or down in an old Lavida?

Will modifying the car grille affect the annual inspection?

The impact of car grille modification on the annual inspection is as follows: 1. If you have filed the modification with the vehicle management office in advance and the photo on the driving license has been updated accordingly, you can pass the annual inspection. 2. If you have not filed the modification with the vehicle management office in advance and the photo on the driving license has not been updated, you will not pass the annual inspection. Regarding car modifications, Chinese law has clear regulations. Article 16 of the "Regulations on the Registration of Motor Vehicles" stipulates: Under any of the following circumstances, the owner of the motor vehicle does not need to apply for modification registration, provided that it does not affect safety and the identification of the license plate: (1) Installation of front and rear anti-collision devices on small and micro passenger vehicles; (2) Installation of windshields, water tanks, toolboxes, spare tire racks, etc. on freight motor vehicles; (3) Addition of interior decorations to motor vehicles.

5

2

Share

What does rim protection tire mean?

Rim protection can be divided into two categories: one is the protection of the wheel hub by the tire, and the other is the protection of the wheel hub by installing certain protective devices, such as the common wheel hub protection ring. The following is a detailed introduction: 1. Rim protection technology of tires: Generally, tires with rim protection technology appear to have the sidewall bulging out slightly more than the wheel hub, while ordinary tires have the sidewall more parallel to the wheel hub. The principle of rim protection technology in tires is to design a protruding ring near the bead area, made of rigid rubber. When the tire rubs against curbs or other obstacles, the rigid rubber can withstand the impact and protect the wheel hub from scratches. 2. Installing protective devices on the wheel hub to provide protection: For example, wheel hub protection rings. Careful selection is still required when purchasing and using them to avoid increasing tire wear. There is also a type of wheel hub protection sticker, which also falls into this category of products.

12

3

Share

What Causes Steering Gear Noise?

Steering gear noise issues can be caused by steering mechanism failure, dirty power steering fluid, or lack of maintenance on the steering knuckle over time. Below are detailed explanations: Steering Mechanism Failure: If the steering mechanism fails, such as producing loud noises during turns, it may be due to excessive gear clearance in the steering mechanism. Dirty Power Steering Fluid: If the power steering fluid is too dirty, it can increase the pressure in the power steering system, causing the power steering pump to emit a "buzzing" noise. Lack of Maintenance on Steering Knuckle: Prolonged lack of maintenance on the steering knuckle can lead to severe oil deficiency, wear, or even burning in the steering column and bushings, all of which can cause noise. Function of the Steering Gear: The steering gear reduces the control force required on the steering wheel while ensuring that the turning amplitude of the steering wheel is proportional to that of the tires. A series of devices used to change or maintain the direction of a car's movement or reverse is called the automotive steering system.

5

Share

What Causes ECM Failure in the Engine Brake Module?

ECM failure in the engine brake module is a software-related issue in the computer. It can be resolved by analyzing the symptoms, reinstalling the system, replacing the software, modifying the software program, or removing computer viruses. The engine control calibration program is stored in an electrically erasable programmable read-only memory (EEPROM), which is a permanent memory soldered onto the ECM and cannot be replaced separately. When replacing the ECM, the new ECM must be programmed according to the vehicle model before it can be used. Here is additional information: 1. The automotive engine control module (ECM) interacts with many emission-related components and systems and monitors whether their performance degrades. OBD-II diagnostics monitor system performance and set a diagnostic trouble code (DTC) when performance declines. 2. The operation of the malfunction indicator lamp (MIL) and the storage of DTCs are determined by the type of DTC. If the DTC is related to emissions in Asian and American vehicle engine control systems, it is classified as Type A or Type B. Type C DTCs are not related to emissions.

8

5

Share

What are the differences between the 2007 and 2008 Crown models?

The differences between the 2007 and 2008 Crown models are minimal, as the two models were released in quick succession and belong to the same generation. The primary distinction lies in the powertrain options: the 2007 Crown offers two powertrain combinations, while the 2008 Crown only has one. In other words, the 2007 Crown has one additional powertrain option compared to the 2008 model. Here are more details about the two powertrain combinations: 1. The shared powertrain combination for both 2007 and 2008 models: Equipped with a 2.5-liter V6 naturally aspirated engine, paired with a 6-speed automatic transmission, delivering a maximum power of 145 kW, maximum horsepower of 193 PS, and maximum torque of 236 N·m. 2. The additional powertrain combination: Equipped with a 3.0-liter V6 naturally aspirated engine, paired with a 6-speed automatic transmission, delivering a maximum power of 170 kW, maximum horsepower of 231 PS, and maximum torque of 300 N·m.

5

Share

Do I need to register modified car exhaust pipes with the vehicle management office?

Modifications to the appearance of car exhaust pipes do not require registration with the vehicle management office, as these modifications do not affect the vehicle's performance and are merely decorative. Below is additional information on illegal modifications: 1. Changing the car emblem, adding lighting devices, or installing xenon headlights—any alterations that change the vehicle's fundamental characteristics are considered illegal. For example, replacing a domestic car emblem with a "Mercedes" emblem for fun or adding an original Toyota emblem, which changes the vehicle's identifying features, constitutes illegal modification. 2. To enhance the vehicle's aesthetic or lighting effects, installing LED lights on the roof or other parts of the body, or replacing the factory-installed headlights with extremely bright xenon headlights, are common illegal modifications that require attention. 3. Some vehicles have dark films applied to their taillight covers, reducing the original brightness of the lights and altering the required brightness standards, which is also considered illegal modification. In adverse weather conditions such as snow or fog, this can make it difficult for drivers to accurately judge the position of the vehicle ahead, compromising safety.

6

2

Share

What could be the reason for the sudden failure of all four door windows to roll up or down in an old Lavida?

Will modifying the car grille affect the annual inspection?

What does rim protection tire mean?

What Causes Steering Gear Noise?

What Causes ECM Failure in the Engine Brake Module?

What are the differences between the 2007 and 2008 Crown models?

Do I need to register modified car exhaust pipes with the vehicle management office?

What does the MIN display on the Audi Q3 dashboard mean?

What are the differences between BMW 4 Series and 3 Series?

What Are the Parallel Import Toyota Models?

What is the Principle of the Steering Gear?