What Could Be the Reason for a Car Suddenly Not Starting When It Was Running Fine?

1 Answers
EmersynRose
07/30/25 7:47am
Here is an analysis of possible reasons why a car suddenly won't start when it was running fine: 1. Battery issue: If the car stalls while driving, it may be that the battery has reached its limit. The owner can confirm whether the car has power by honking the horn. If there is no power, the car should be towed to a 4S shop for inspection and battery replacement as soon as possible. 2. Fuel level: In this case, it is very likely that the car suddenly stalls due to lack of fuel while driving. Check the fuel gauge to see if there is no fuel left. If so, simply refuel the car.
Was this review help?
6
5
Share
More Forum Discussions

What does TCS stand for?

TCS stands for: TCS is the Traction Control System, also known as the Track Control System. It determines whether the drive wheels are slipping by comparing the rotational speed of the drive wheels with that of the transmission wheels. When the former exceeds the latter, it suppresses the speed of the drive wheels as an anti-slip control system, which operates very similarly to the ABS, with both using sensors and brake regulators. Methods by which TCS controls wheel slip: 1. When the drive wheels slip, it uses the brake system to increase the brake fluid pressure on the slipping wheel, applying appropriate braking to limit wheel slip; 2. Additionally, it controls the engine's power output by delaying ignition timing, reducing fuel injection volume, or adjusting valve opening to decrease the driving force on the drive wheels and prevent them from slipping.
1
4
Share

How to Turn Off the ECO Display in Hyundai Mistra?

The method to turn off the ECO display in Hyundai Mistra is: 1. Open the driver's side door of the car; 2. Press the car's one-touch start button; 3. Press the economy mode button located next to the gearshift lever to deactivate the car's transmission economy mode. The Hyundai Mistra measures 4780mm in length, 1815mm in width, and 1460mm in height, with a wheelbase of 2770mm, a minimum ground clearance of 116mm, and a curb weight of 1357kg. This vehicle features a MacPherson strut front suspension and a multi-link rear suspension. It is equipped with a 1.5T inline four-cylinder engine, delivering a maximum horsepower of 170ps, a maximum torque of 253nm, and a peak power output of 125kw.
1
3
Share

Which Side of the Oil Seal Faces the Oil?

The grooved side of the oil seal faces the oil. Concept of Oil Seal: An oil seal, also known as a shaft seal, is a component used in machinery to prevent fluid (mostly lubricating oil) from leaking at joints (mostly at the mating surfaces of parts or rotating shafts). Sealing elements used for static sealing and dynamic sealing (generally reciprocating motion) are called sealing components. Representative Form of Oil Seal: The representative form of oil seal is the TC oil seal, which is a double-lip oil seal with a self-tightening spring completely covered by rubber. Generally, the term oil seal often refers to this type of TC skeleton oil seal. Oil seals are generally divided into single-piece type and assembly type. The assembly type allows free combination of the skeleton and lip material, usually used for special oil seals.
4
2
Share

Why can't the fuel tank cap of the Passat Lingyu be opened?

Reasons why the fuel tank cap of the Passat cannot be opened include the fuel tank cap being stuck or the hinge of the fuel tank cap being rusty. Hidden functions of the fuel tank cap: The octane rating of the gasoline the car uses; a hidden drainage outlet for the car's drainage; marking the tire pressure of the car and the standard range of tire pressure. How to open the fuel tank cap: The in-car switch is currently the most common way to open the fuel tank door, which is certainly more convenient compared to using a key. The position of the in-car switch varies among different car models. Some are located on the floor to the left of the driver's seat, some on the left front door panel or the center console, marked with an icon resembling a fuel pump.
12
4
Share

How to Open the Hood of the Ford Everest?

The method to open the hood of the Ford Everest is: 1. Pull the hood release handle located at the lower left side of the driver's side dashboard inside the vehicle; 2. Push the hood lock safety hook handle, positioned in the middle of the radiator grille, upwards to disengage it, then lift the hood; 3. Secure the support rod into the hood's support rod hole. The Ford Everest has dimensions of 4892mm in length, 1862mm in width, and 1837mm in height, with a wheelbase of 2850mm. This vehicle is equipped with a 2.3T inline four-cylinder engine and a 10-speed automatic transmission, delivering a maximum power of 202 kW and a maximum torque of 455 Nm, with a front-engine, four-wheel-drive configuration.
9
5
Share

Can Anti-Slip Chains Be Used on Urban Roads?

Anti-slip chains can be used on urban roads, but only on snow and ice-covered surfaces. They are strictly prohibited on regular roads. Concept and Classification of Anti-Slip Chains: Anti-slip chains are generally made of steel or rubber and serve the function of preventing skidding. Based on their structure, anti-slip chains can be divided into two types: one is a pre-formed chain cover, and the other consists of several separate chains installed in a cross pattern. The latter is simpler and more affordable but less convenient to install compared to the former. Precautions for Using Anti-Slip Chains: For front-wheel-drive vehicles, the chains should be installed on the front two wheels, while for rear-wheel-drive vehicles, they should be installed on the rear wheels. Notably, for four-wheel-drive vehicles, anti-slip chains must be installed on all wheels. Improper installation may lead to skidding or loss of balance.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.