What could be the reason for a Buick Excelle not responding when attempting to start with power?

What engine does the Mazda Axela have?

The engine of the Mazda Axela is produced by Nanjing Changan Mazda Engine Co., Ltd., and is a domestically manufactured engine. The 1.5L version of the Mazda Axela has an engine model SKYACTIV-G, with a maximum power of 86kW, maximum torque of 148 Nm, and maximum horsepower of 117. The 2.0L version has an engine model SKYACTIV-X, with a maximum power of 116kW, maximum torque of 202 Nm, and maximum horsepower of 158. For daily maintenance of the Mazda Axela's engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, choose SD--SF grade gasoline engine oil based on the additional equipment of the intake and exhaust system and usage conditions. For diesel engines, choose CB--CD grade diesel engine oil based on mechanical load, with the selection standard not lower than the manufacturer's requirements. Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, causing various problems for the engine. To avoid failures, change the oil regularly based on usage conditions and keep the oil volume moderate. When oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and oil cannot pass through, the filter may burst or the safety valve may open, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication area, accelerating engine wear and increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from part wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, clogging filters and oil holes, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.

10

2

Share

What is the fuel consumption per kilometer for the CR-V?

The CR-V currently has 17 models on sale. Among them, 9 models including the 2021 CR-V 240TURBO manual two-wheel drive classic edition and the 2021 240TURBO CVT two-wheel drive comfort edition, equipped with a 193 horsepower engine, have an NEDC fuel consumption of 6.6L per 100 kilometers. The other 8 models, including the 2021 CR-V Sharp Hybrid 2.0L two-wheel drive pure edition and the 2021 Sharp Hybrid 2.0L two-wheel drive net speed edition, equipped with a 146 horsepower engine, have an NEDC fuel consumption of 4.9L per 100 kilometers. The fuel tank capacity of the 2021 Honda CR-V varies by model. The distance that can be covered with a full tank of fuel is as follows: Models equipped with a 193 horsepower engine have a fuel tank capacity of 53L, and the distance that can be covered with a full tank is 53/6.6*100=803KM. Models equipped with a 146 horsepower engine have a fuel tank capacity of 53L, and the distance that can be covered with a full tank is 53/4.9*100=1082KM. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase a car's fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before encountering a red light, can increase fuel consumption. The car itself: Cars with larger displacement engines generally consume more fuel than those with smaller displacement engines because larger displacement usually means greater power, requiring more gasoline to burn and perform work. Heavier cars also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperature: When the engine block temperature is low during cold starts, the injected gasoline is less likely to atomize, requiring more gasoline to be injected for combustion, which increases fuel consumption. Additionally, at low temperatures, the engine's computer will control the engine to run at higher RPMs to warm up the car, which also increases fuel consumption.

9

0

Share

Should You Shift to Park or Engage the Handbrake First When Parking?

When parking, you should engage the handbrake first and then shift to Park (P). This is because the handbrake is more secure than the P gear. Here’s a detailed explanation: 1. In a car's transmission, both P (Park) and N (Neutral) gears disconnect the power transfer between the input and output shafts. However, the P gear differs from the N gear in that it has an additional pawl-and-gear mechanism at the end of the output shaft. 2. The pawl is fixed to the transmission housing, while the gear is fixed to the end of the output shaft. When the transmission is shifted into P, the pawl presses down and engages with the gear, achieving a locking effect. At this point, both wheels cannot rotate in the same direction simultaneously, preventing the vehicle from moving forward or backward. 3. The handbrake stabilizes the vehicle by clamping the rear brake discs, preventing the rear wheels from rotating. A mechanical cable handbrake pulls the brake caliper via a steel cable to clamp the brake disc, while an electronic parking brake uses a servo motor on the caliper to achieve the same effect. 4. The P gear locks the front wheels, and the handbrake locks the rear wheels, ensuring the vehicle cannot move. However, if you attempt to push the car while only in P, you may notice slight movement due to the relatively large engagement gap between the pawl and gear. Additionally, the P gear's pawl-and-gear mechanism has a self-protection feature—if the force exceeds a certain threshold, the pawl will disengage to avoid damaging the transmission. Therefore, the P gear is not as reliable as the handbrake.

12

3

Share

How to Check the Tire Pressure Monitoring on Trumpchi GS4?

The tire pressure monitoring on the Trumpchi GS4 can be viewed on the dashboard. The vehicle comes equipped with a tire pressure monitoring system that automatically alerts you without requiring manual operation. If the tire pressure light comes on and needs to be reset, it will automatically turn off after driving a certain distance if the tire pressure sensor hasn't been replaced. Tire Pressure Reset Method: First, turn on the ignition, then press and hold the tire pressure monitoring reset button until you hear a "ding" sound before releasing it. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the dashboard warning light will turn off, completing the tire pressure reset. There are three common types of tire pressure monitoring methods: Direct Tire Pressure Monitoring: Direct tire pressure monitoring devices use pressure sensors installed in each tire to directly measure the tire pressure. The pressure information is transmitted wirelessly from inside the tire to a central receiver module, which then displays the tire pressure data for each tire. The system automatically alerts you when the tire pressure is too low or if there is a leak. Indirect Tire Pressure Monitoring: When the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that tire to become smaller, making it rotate faster than the other wheels. By comparing the differences in rotational speed between the tires, the system monitors the tire pressure. Indirect tire pressure alert systems essentially rely on calculating the rolling radius of the tires to monitor pressure. Introduction to Tire Pressure Monitoring System (TPMS): This system combines the advantages of the two aforementioned systems. It installs direct sensors in two diagonally opposite tires and includes a four-wheel indirect system. Compared to a full direct system, this hybrid system can reduce costs and overcome the limitation of indirect systems, which cannot detect when multiple tires simultaneously have low pressure. However, it still cannot provide real-time data on the actual pressure in all four tires like a direct system can.

5

0

Share

Does a Plug-in Hybrid Need to Be Charged?

Plug-in hybrid vehicles do need to be charged. Detailed explanations are as follows: 1. Charging Methods: Under normal circumstances, the engine of a plug-in hybrid vehicle cannot directly charge the power battery. However, it can charge the battery through some energy recovery devices. Therefore, when the power battery is low on charge, it must be charged externally. 2. Advantages of Plug-in Hybrids: The advantage of plug-in hybrids is that they have relatively large batteries that can be charged externally. They can operate in pure electric mode until the battery is depleted, after which they can continue driving in hybrid mode.

8

4

Share

What is the fuel consumption of the Excelle XT?

Excelle's fuel consumption ranges between 5.1L-8.2L. Here are some key points about fuel consumption: 1. Definition: Generally refers to the gasoline consumption per 100 kilometers, which is a theoretical indicator for vehicles. 2. Methods to reduce fuel consumption: Longer idling time leads to higher fuel consumption, so minimize idling time; Avoid rapid acceleration, slamming the throttle, and driving at low RPMs. 3. Factors affecting fuel consumption: Various working conditions such as acceleration, deceleration, braking, and engine idling, as well as load capacity, temperature, and whether the air conditioning is on, all have an impact.

4

3

Share

What could be the reason for a Buick Excelle not responding when attempting to start with power?

What engine does the Mazda Axela have?

What is the fuel consumption per kilometer for the CR-V?

Should You Shift to Park or Engage the Handbrake First When Parking?

How to Check the Tire Pressure Monitoring on Trumpchi GS4?

Does a Plug-in Hybrid Need to Be Charged?

What is the fuel consumption of the Excelle XT?

What is the actual fuel consumption of the GL8?

How to Turn Off the Radio in a BMW X4?

How to Remove the Airbag in Volkswagen Passat?

How many kilometers should the timing belt of Hyundai Elantra be replaced?