What Constitutes Wrong-Way Driving?

2 Answers
VonEvangeline
07/29/25 1:34am
On roads with solid dividing lines, motor vehicles entering the opposite lane are considered wrong-way driving. This includes roads with double solid lines or single solid lines, where crossing the line is prohibited under any circumstances. On roads with dashed dividing lines, overtaking by borrowing the opposite lane is allowed if safety is ensured. However, in the event of an accident, the vehicle borrowing the lane will be deemed as driving in the wrong direction. On roads marked with one-way signs, any motor vehicle entering is considered wrong-way driving. Additional information: When imposing a fine on the party, they shall be informed to pay the fine at the designated collection agency within fifteen days from the date of receiving the penalty decision. If the party fails to pay the fine on time, an additional fine of three percent of the penalty amount will be imposed daily.
Was this review help?
19
4
Share
LaEvelyn
08/12/25 5:39am
As someone who drives frequently, let me explain what driving against traffic means. Simply put, it means your car is moving in the opposite direction, facing oncoming vehicles. The most common scenario is on one-way streets—if you enter in a direction that contradicts the arrow signs or road markings, you're completely going the wrong way. It's even more dangerous on highways; if you mistakenly enter an exit ramp or end up in the opposing lane, that also counts as driving against traffic. Once, I almost drove the wrong way down a narrow alley but luckily spotted a 'No Entry' sign in time. This kind of mistake is serious—it carries huge risks, easily leading to collisions, and if caught by police, you could face a 3-point penalty and a 200-yuan fine. So whether you're a beginner or an experienced driver, make it a habit: check your navigation for direction before driving, stay alert to road signs and traffic signals, especially in unfamiliar areas. Never get distracted, or you might regret it.
Was this review help?
9
4
Share
Expand All
More Forum Discussions

How Often Should Vehicles Undergo Inspection?

Micro and small non-commercial passenger vehicles over 6 years old must be inspected annually. Non-commercial mini and small passenger vehicles with 7-9 seats enjoy a 6-year exemption policy, exempt from on-site inspection within 6 years, but require obtaining an annual inspection sticker every 2 years. Inspection Notes: Within the three-month period including the initial registration month and the two preceding months, after handling all traffic violations, bring the vehicle registration certificate, compulsory traffic insurance policy, and ID card to the local inspection station for vehicle inspection. Inspection Content: Vehicles reaching 6 years must undergo an annual inspection, which includes paying fees at the inspection station, followed by exterior checks, exhaust emission testing, and safety technical inspections. After passing all tests, collect the results, have them signed and uploaded by staff, and receive the annual inspection sticker upon approval.
14
2
Share

Which country does the MG6 belong to?

MG6 is a car produced in China. Here is more information about this car: 1. The MG6 is equipped with a 1.5T turbocharged engine, with a maximum horsepower of 169PS, maximum torque of 250Nm, maximum power of 124kW, maximum power speed range of 5000-5500rpm, and maximum torque speed range of 1700-4300rpm. It is paired with a 7-speed dual-clutch transmission. 2. The MG6 has body dimensions of: length 4545mm, width 1856mm, height 1668mm, wheelbase of 2680mm, minimum ground clearance of 190mm, and a body weight of 1480kg.
8
2
Share

How to Reset the Outlander Maintenance Reminder?

Steps to reset the Outlander maintenance light are as follows: 1. Turn the ignition switch to the "OFF" mode, repeatedly press the indicator selection button at the lower right of the instrument panel until the information display switches to the maintenance cycle prompt. 2. Then, press and hold the indicator selection button for more than 5 seconds, and the maintenance light will be reset. Below is some information about the maintenance light: 1. The function of the maintenance light is to record the mileage of important components, acting like a timer to remind the car owner and maintenance personnel. 2. To ensure normal driving, manufacturers have set up some reminder indicator lights during production. After reaching a certain mileage, it is necessary to replace the components in time. After successful replacement, the car maintenance light also needs to be reset.
6
3
Share

What kind of oil should be used for Octavia?

Škoda Octavia uses fully synthetic oil with the model specification of 5W-40. The following is a detailed introduction to the oil: 1. Mineral oil. It is refined from crude oil. Usually, the cost of mineral oil is very low, but because the mineral oil base is more prone to oxidation, mineral oils are added with various imported additives, and the service life is about six months. 2. Semi-synthetic oil. The refining cost is high, but the oxidation resistance is good. It is quite a good long-lasting oil, and the service life is about twelve months. Considering the balance between price and quality, semi-synthetic oil has the widest range of applications. 3. Fully synthetic oil. It is a chemically synthesized oil that can maintain lubrication even under the condition of base oil failure.
2
1
Share

What to Do If the First Maintenance Is Overdue?

If the first maintenance is overdue, the car owner can only perform the maintenance at their own expense. Here are the specific details: 1. The deadline for the first car maintenance is determined by two conditions: time and mileage. Exceeding either condition means the first maintenance period has passed, and the 4S store may refuse to provide free maintenance services. 2. Car maintenance refers to regularly inspecting, cleaning, and lubricating the vehicle, as well as checking systems such as the engine system, cooling system, and fuel system. 3. Regular maintenance helps keep the car in good condition, prolongs its service life, and ensures optimal performance. 4. The first maintenance is performed free of charge at the 4S store and includes tasks such as changing the engine oil and oil filter. Regular maintenance helps maintain the best working condition of all car components.
12
3
Share

What do bore and stroke mean?

Bore refers to the diameter of the cylinder, while stroke is the distance between the top dead center and bottom dead center of the piston movement. Here are the relevant introductions: 1. The ratio of stroke to bore: The ratio of stroke to bore is the most fundamental and important structural element of an internal combustion engine. It not only has a significant impact on scavenging quality and heat conduction but also affects the engine's power and fuel consumption rate. It also influences the structure and dimensions of all components, thereby affecting the engine's vibration, specific weight indicators, and service life. 2. Principle: Two-stroke gasoline engines generally use loop scavenging, which means using fresh air-fuel mixture to expel the remaining exhaust gas in the cylinder through the exhaust port. From this, it can be understood that the more thoroughly the exhaust gas in the cylinder is expelled, and the less fresh air-fuel mixture escapes with the exhaust gas (this situation is called good scavenging quality), the greater the engine's power and the lower the fuel consumption rate.
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.