What Components Make Up a Car Chassis?

1 Answers
MacHadley
07/28/25 7:22pm
An automobile chassis consists of the drivetrain, steering system, running gear, and braking system. The chassis serves to support and mount the car's engine along with its various components and assemblies, shaping the vehicle's body structure. It receives power from the engine to enable motion and maintain normal operation. Methods for maintaining a car chassis include: 1. Regularly inspect lubrication conditions of critical assemblies; 2. Monitor wear on brake pads and clutch plates; 3. Perform periodic wheel alignment; 4. Check tire pressure and tread wear; 5. Apply chassis sealant or install protective undercoating; 6. Minimize driving on rough or muddy terrain.
Was this review help?
5
4
Share
More Forum Discussions

How often should the spark plugs of the Changan CS75 be replaced?

The spark plugs of the Changan CS75 should be replaced every 12 months or after reaching a mileage of 20,000 kilometers. The function of the spark plug is to discharge the high-voltage pulse current sent by the high-voltage wire, breaking down the air between the two electrodes of the spark plug to generate an electric spark, thereby igniting the mixed gas in the cylinder. The main types of spark plugs include: standard spark plugs, insulator-protruding spark plugs, electrode-type spark plugs, seat-type spark plugs, pole-type spark plugs, and surface-jump spark plugs. The Changan CS75 is a compact SUV, with dimensions of 4650mm in length, 1850mm in width, and 1705mm in height, and a wheelbase of 2700mm. The Changan CS75 features a large number of metal decorative parts, with different textures presented through processes such as electroplating and spraying, making every detail design feel exquisite.
20
5
Share

What Causes the Red Light on the Dashboard to Flash?

The flashing red light on the dashboard may be caused by the following reasons: 1. The water temperature warning light indicates that the engine is overheating. Possible causes include low coolant level, faulty water temperature sensor, or issues with the water circulation cooling system. You should stop and check immediately to avoid engine damage. 2. If the brake warning light comes on, it may indicate worn-out brake pads, low brake fluid, or a short circuit in the wiring. If the brake warning light is on, you should stop and check whether the brakes are functioning properly and if the vehicle can be stopped safely. Drive to the nearest repair shop for inspection promptly. Otherwise, severe brake failure may lead to accidents. 3. If the ABS warning light is on, it may indicate a braking issue. Check whether the signal interruption is caused by dirt on the wheels or a faulty sensor to reduce safety hazards.
7
5
Share

What are the differences between the 2019 Audi A6L 40 and 45?

The differences between the 2019 Audi A6L 40 and 45 are as follows: 1. Different engines: The 40 model is equipped with a low-power version of the 2.0-liter turbocharged engine; the 45 model is equipped with a high-power version of the 2.0-liter turbocharged engine. 2. Different power outputs: The low-power engine in the 40 model has a maximum power of 190 horsepower and a maximum torque of 320 Nm; the high-power engine in the 45 model has a maximum power of 224 horsepower and a maximum torque of 350 Nm. 3. Different configurations: The 45 model features keyless entry, while the 40 model does not. 4. Sunroof: The 40 model has a standard sunroof, while the 45 model has a front and rear segmented sunroof.
3
2
Share

Should Manual Transmission Fluid Be Replaced?

Manual transmission fluid needs to be replaced, but it has a relatively long service life. Generally, it should be replaced every 3 years or after driving approximately 80,000-100,000 kilometers. More information about manual transmission fluid is as follows: 1. There is no fixed interval for replacing manual transmission fluid because manual transmissions have a simpler structure compared to automatic transmissions and more mature technology, resulting in lower requirements for transmission fluid. Therefore, the service life of manual transmission fluid is longer than that of automatic transmission fluid. 2. Regular maintenance of the transmission should be performed. After driving for a certain period, check the transmission for any oil leaks and also inspect the condition of the transmission fluid. If the transmission fluid level is insufficient, it should be replenished promptly. If the fluid color darkens or the quality deteriorates, it should be replaced immediately.
14
1
Share

How Many Chances Are There for the Subject 3 Safety and Civilization Knowledge Test?

There are two attempts for the Subject 3 Safety and Civilization Knowledge Test, with five opportunities for scheduling. The Subject 4 Safety and Civilization Knowledge Test is essentially the theoretical component of Subject 3, covering the mandatory theoretical content after passing Subject 3. The content of the Safety and Civilization Test includes: 1. Safety and civilized driving operation requirements, such as getting in and out of the vehicle, driving posture, and standard operation methods of control devices; 2. Safe driving knowledge under adverse weather and complex road conditions, and the impact of driving environment on safe driving; 3. Emergency handling methods in critical situations like tire blowouts and post-accident disposal knowledge, such as how to deal with a tire leak, solutions for a rear tire blowout, and methods to handle a tire blowout while driving.
11
1
Share

What are the differences between Range Rover and Range Rover Sport?

The main differences between Range Rover and Range Rover Sport are as follows: 1. Exterior design. The Range Rover features a more squared-off overall design, with conventional styling that gives it a very steady and mature appearance, while the Range Rover Sport appears more youthful. The Range Rover Sport embodies a youthful luxury, presenting a dynamic and energetic stance that caters more to younger audiences. Externally, the Range Rover Sport is generally smaller than the Range Rover, with a shorter length. 2. Comfort level. The Range Rover utilizes a unibody construction, which offers the advantage of extremely smooth highway driving. The entire body is integrated, resulting in low inherent frequency vibration, minimal noise, and enhanced overall safety. The Range Rover Sport employs a body-on-frame design with an independent chassis, providing higher structural strength and better resistance to bumps. Additionally, uneven forces on the four wheels are absorbed by the frame rather than transmitted to the body, resulting in a smoother driving experience.
16
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.