What Compensation Should Be Given for Honda's Fuel Pump Recall Replacement?

Where is the license plate Lu W from?

Lu W was previously used by provincial government employees in Jinan. In 2016, the Lu W license plate was discontinued, so this plate no longer exists today. It might be a fake plate or a prop plate used in TV dramas. More information about license plates is as follows: 1. The Chinese character at the beginning of a license plate represents the provincial-level administrative region where the vehicle is registered, while the letter represents the prefecture-level city. 2. Lu is the abbreviation for Shandong Province, so license plates starting with Lu belong to Shandong. According to relevant laws and regulations, starting from October 2018, Shandong Province abolished the Lu O and Lu W license plates, and completed the replacement of all such plates by December 31 of the same year. Vehicle owners still using Lu W plates today will face penalties and legal consequences under relevant regulations.

18

3

Share

Can I change a tire by myself on the highway?

You can change a tire by yourself on the highway, but it should be done in the emergency stopping lane with warning signs set up. Here are the procedures for handling emergencies on the highway: 1. When a vehicle breaks down and has to stop, immediately pull over to the right hard shoulder or emergency stopping lane, and turn on the hazard warning lights. If it's nighttime, also turn on the position lights and tail lights. 2. Set up a warning sign, commonly known as a triangle warning sign, which is usually stored in one of three places in the car: the trunk, the inside of the trunk lid, or under the trunk cover. 3. Take the warning sign, with the reflective side facing outward, walk in the direction of oncoming traffic, and place it 150 meters away in the corresponding lane. 4. Immediately evacuate all personnel to the outside of the right guardrail, then call the national unified highway emergency rescue number 12122 for assistance.

14

2

Share

How to Control Vehicle Speed with the Clutch?

When depressing the clutch, you should press it quickly and release it slowly. The correct way to step on the pedal is to place the sole of your foot on the pedal to prevent slipping. On uneven roads, you can lightly apply the brake to control speed, but the braking should be gentle, gradually increasing pressure during the process—avoid sudden braking. Develop the habit of starting by slowly releasing the clutch to the semi-engaged state, then releasing the brake until the car gradually starts. Below is additional information about the clutch: 1. The clutch is installed between the engine and the transmission and is the component in the vehicle's drivetrain that directly connects to the engine. Typically, the clutch is mounted together with the engine crankshaft's flywheel assembly, serving as the part that disengages and transmits power between the engine and the drivetrain. Throughout the process from starting to normal driving, the driver can operate the clutch as needed to temporarily separate or gradually engage the engine and drivetrain, thereby cutting off or transmitting the power output from the engine to the drivetrain. Its function is to allow gradual engagement between the engine and the transmission, ensuring a smooth start; temporarily disconnecting the engine from the transmission to facilitate gear shifting and reduce impact during shifting; and acting as a separator during emergency braking to prevent overloading of the transmission and other drivetrain components, providing a certain level of protection. 2. The so-called 'one fast, two slow, three engagement' refers to the three stages of lifting the clutch pedal: initially lifting quickly, then slowing down when the clutch pressure plate gradually engages to the semi-engaged state, and finally lifting the pedal slowly from semi-engagement to full engagement. While lifting the clutch pedal, the accelerator pedal should be gradually pressed down according to the engine's power output to ensure a smooth start. The accelerator operation should be steady and appropriate, and the throttle should only be increased when the clutch is fully engaged.

13

1

Share

Is an Idle Speed of 1000 RPM Normal for a Car?

If the car idles at 1000 RPM when cold, and the idle speed decreases after the engine temperature rises to a certain level, it is considered normal. The idle speed of a car varies between cold and warm engine conditions. Generally, a well-functioning engine under warm conditions has an idle speed between 550 to 800 RPM. In cold conditions, the car needs to allow the engine to quickly reach its normal operating environment after starting. Therefore, during a cold start, the engine's computer automatically injects more fuel, burning more fuel than the normal idle speed to rapidly increase the engine's water temperature and bring the engine to an optimal temperature quickly. This is mainly manifested as a higher idle speed when the engine is cold, typically between 950 to 1300 RPM. Once the engine temperature rises to a certain value, the idle speed will decrease to the normal range.

18

3

Share

Why Does Frost Form on the Outside of the Windshield?

Frost forms on both the inside and outside of the car's front windshield because residual heat inside the vehicle causes the glass temperature to be higher than the outside. If the external temperature is too low or it snows, the snowflakes landing on the glass will initially melt. Below is a related explanation: 1. Why frost forms: During the melting process of the snowflakes, when the interior temperature gradually drops to match the outside temperature, the melted snow on the glass begins to freeze. Once ice forms, any additional snowflakes that land on it will not melt but instead cover the ice like a blanket. The moisture on the glass then solidifies into ice beads, forming frost on the windshield. 2. Winter defrosting methods: Turn the car's heating system to the highest setting to raise the window temperature and melt the frost. Activate the A/C mode, and once the interior warms up, switch to the recirculation mode to prevent fogging inside the car. Then, turn off the recirculation to lower the interior temperature. Opening the windows allows internal and external air to circulate, speeding up the melting and disappearance of the frost on the windows.

20

0

Share

What engine is equipped in the Changan CS15?

Changan CS15 is equipped with a 1.5-liter naturally aspirated engine, with a maximum power of 78.5 kilowatts, a maximum torque of 145 Newton-meters, a maximum power speed of 5500 revolutions per minute, and a maximum torque speed of 3500 to 4500 revolutions per minute. Here are the relevant details: 1. Changan CS15 is a compact SUV, with dimensions of 4135 mm in length, 1740 mm in width, and 1630 mm in height, and a wheelbase of 2520 mm. 2. Suspension: The front suspension of the Changan CS15 uses a MacPherson independent suspension, while the rear suspension uses a torsion beam non-independent suspension. The manual entry-level model's front face has a lively feel, with an inverted trapezoidal grille decorated with chrome trim and sharp headlights, giving the front face a certain level of texture.

3

5

Share

What Compensation Should Be Given for Honda's Fuel Pump Recall Replacement?

Where is the license plate Lu W from?

Can I change a tire by myself on the highway?

How to Control Vehicle Speed with the Clutch?

Is an Idle Speed of 1000 RPM Normal for a Car?

Why Does Frost Form on the Outside of the Windshield?

What engine is equipped in the Changan CS15?

Where is the BMW Air Filter Located?

Is it illegal to lie down and sleep in the passenger seat?

How to Report for Subject Three (Road Test)?

How many kilometers does a new car's spark plug need to be replaced?