What colors does the Fista come in?

1 Answers
Marvin
07/30/25 1:25am
The Fista is available in the following colors: Polar White, Elegant Gray, Sky Gray, China Red, Sapphire Blue, Sand Gold, and Midnight Black. Taking the 2021 Fista as an example, its body dimensions are: length 4660mm, width 1790mm, height 1425mm, with a wheelbase of 2700mm, a fuel tank capacity of 53 liters, and a trunk capacity of 475 liters. The 2021 Fista is equipped with a 1.6T turbocharged engine, delivering a maximum power of 140kW and a maximum torque of 265Nm, paired with a 7-speed dual-clutch transmission. It features a front McPherson independent suspension and a rear multi-link independent suspension.
Was this review help?
5
0
Share
More Forum Discussions

Where is the location to add windshield washer fluid in the Baojun 510?

The location to add windshield washer fluid in the Baojun 510 is at the lower right corner of the engine compartment, where a white cap marks the spot. Open the white cap and pour in the windshield washer fluid, with a maximum capacity of approximately 1.5 liters per refill. Windshield washer fluids are mainly categorized into three types: 1. Summer-specific; 2. Regular winter windshield washer fluid; 3. Special anti-freeze windshield washer fluid. In terms of body dimensions, the vehicle measures 4220mm in length, 1740mm in width, and 1615mm in height, with a wheelbase of 2550mm. Some variants have a height of 1625mm. Regarding the suspension system, the Baojun 510 features a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension.
10
4
Share

Is the Baojun 360 a Three-Cylinder or Four-Cylinder Engine?

Baojun 360 is equipped with a four-cylinder engine featuring natural aspiration. The entire lineup is powered by a 1.5L engine. The 1.5L engine delivers a maximum output power of 77 kW and a peak torque of 135 Nm, paired with a 6-speed manual transmission, achieving a top speed of 160 km/h. The dimensions of the Baojun 360 are 4615mm in length, 1735mm in width, and 1660mm in height, with a wheelbase of 2750mm. The Baojun 360 adopts a new design language, featuring a hexagonal front grille and hawk-eye-style headlights for a dynamic appearance. From the side, the waistline extends from the front to the rear lamp clusters, while the B, C, and D pillars are blackened, creating smooth and sharp lines that enhance the sense of layering and dynamism.
10
3
Share

What is the fuel consumption of the Cadillac CT6?

Cadillac CT6's fuel consumption is 7.9L. The following are specific details about the Cadillac CT6: Configuration: Driver/passenger airbags, front side airbags, front/rear head airbags, passive pedestrian protection, tire pressure monitoring, ABS anti-lock braking, brake force distribution, brake assist, traction control, vehicle stability system, etc. Power: The Cadillac CT6 is equipped with a 2.0T engine, paired with a 10-speed automatic transmission. The 2.0T engine has a maximum output power of 177 kW, a maximum torque of 350 N·m, a top speed of 230 km/h, and a 0-100 km/h acceleration time of 7.47 seconds.
17
0
Share

How to Distinguish Between Engine Oil and Gear Oil?

Methods to distinguish between engine oil and gear oil are as follows: 1. Usage: Engine oil generally refers to the lubricating oil used in various engines, and it is the most widely used lubricant in engines. Gear oil, also known as transmission lubricating oil, is mainly used to lubricate the gears in the transmission system of automobiles and tractors, including gearboxes, reducers, and differentials. 2. Source and state: Gasoline engine oil is extracted and refined from underground oil wells. This unrefined lubricating oil is not suitable for engines, so it must undergo strict refining and the addition of various elements to effectively suppress unstable states in extreme cold and high temperatures. Gear oil has a higher viscosity than engine oil and is slightly black, hence it is also called black oil. Due to the different shapes of gear teeth, the requirements for gear oil also vary, generally divided into regular gear oil and hypoid gear oil.
2
4
Share

Can I Add Good Fuel After Adding Poor-Quality Fuel?

If poor-quality fuel has been added to the car, it is best not to mix in good fuel immediately; instead, wait until the current fuel is used up before refilling. Remedial measures for adding low-quality gasoline are as follows: 1. Clean the fuel system: Poor-quality gasoline contains many impurities that can clog the fuel system. It is necessary to replace the fuel filter and clean the fuel injectors promptly. If there are excessive impurities, the fuel tank and fuel lines should also be cleaned to prevent more severe consequences. 2. Clean the cylinders: Poor-quality gasoline leaves behind significant residues after combustion, which can form severe carbon deposits over time that are difficult to remove. The cylinders should be cleaned to prevent these residues from hardening and damaging the engine. 3. Clean the three-way catalytic converter: The gases produced by burning poor-quality gasoline can poison the three-way catalytic converter. Cleaning engine carbon deposits may also cause blockages in the three-way catalytic converter.
16
1
Share

Why can't the gear shift be moved from P position?

Automatic transmission P position locks the vehicle's gear shift. Below is relevant information about automatic transmissions: 1. The transmission has evolved from manual operation to automatic shifting: However, automatic transmission gears still have certain timing requirements. Improper operation (such as the automatic gear lever being stuck in P position) and forced gear shifting can easily damage the transmission. Let's look at how the automatic P position works: When the gear lever is in P position, the parking lock mechanism locks the transmission output shaft. In P position, the drive shaft is partially locked inside the transmission, so even without pressing the brake on flat ground, the vehicle still has some braking force. 2. Solution when the automatic gear lever is stuck in P position: To shift to other gears, first start the vehicle and then shift to other gears; or press the brake pedal before switching gears. When parking normally, always ensure the vehicle comes to a complete stop before shifting to P position, otherwise this situation of the gear lever being stuck in P position can easily occur.
11
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.