What colors are available for the Trumpchi GS4?

Is It Normal for a Car's Exhaust Pipe to Leak Water?

It is generally normal for a car's exhaust pipe to leak water, but there are exceptions. After normal combustion, a car produces carbon dioxide and water vapor. When the water vapor condenses, it forms liquid water. When the amount of water vapor reaches a certain level, it is expelled through the exhaust pipe. Some cars are designed with drainage holes in the exhaust pipe to allow this water to exit. However, if the owner notices water droplets from the exhaust pipe forming clumps on the ground or the exhaust appears as a milky white oil mist, this indicates abnormal leakage and requires the owner to check whether the engine's coolant level is abnormal.

3

0

Share

What is the fuel tank capacity of the Mazda6 Atenza in liters?

The fuel tank capacity of the Mazda6 Atenza is 58 liters. Here is some extended information about the Mazda6 Atenza: Basic parameters of the Mazda6 Atenza: Taking the 2020 Mazda6 Atenza as an example, it belongs to the mid-size car category, with body dimensions of: length 4870mm, width 1840mm, height 1445mm, wheelbase of 2830mm, and a fuel tank capacity of 56.2 liters. Configuration of the Mazda6 Atenza: The 2020 Mazda6 Atenza features a MacPherson strut front suspension and a multi-link rear suspension. It is equipped with a 2.0L naturally aspirated engine, producing a maximum horsepower of 158ps, maximum power of 116kw, and maximum torque of 202nm, paired with a 6-speed automatic transmission.

13

3

Share

Can You Continue Driving When the Vehicle Malfunction Light Comes On?

Whether you can continue driving when the vehicle malfunction light comes on depends on the situation: 1. A yellow light indicates a warning, and you can continue driving. For example, a fuel light coming on means the fuel is running low. 2. A red light indicates a prohibition to drive, and you should immediately check the issue. A red light signifies a more serious malfunction, and you should not continue driving. Turn off the engine and wait for assistance or investigate the cause yourself. Sometimes, the malfunction light may come on falsely, as it is controlled by the vehicle's onboard computer, and electronic software can also make errors. Occasionally, unstable voltage values may trigger false alarms, such as with common indicators like the tire pressure monitoring light or battery light.

1

2

Share

Why Does an Automatic Transmission Car Shudder When Starting?

Automatic transmission car shudders when starting due to the following reasons: 1. The throttle is too dirty, causing uneven air intake and operation; 2. Fuel line blockage, leading to insufficient fuel supply at low throttle and uneven operation of engine cylinders; 3. Abnormal operation of the transmission; 4. Broken or burned high-voltage wires or spark plug failure, causing some cylinders to misfire and resulting in unstable engine operation; 5. Battery voltage is outside the specified range. An automatic transmission does not require the driver to manually shift gears; the vehicle automatically selects the appropriate gear based on driving speed and traffic conditions. There are six gear positions, from top to bottom: P, R, N, D, S, L.

16

2

Share

What does unstable idle speed refer to?

Unstable idle speed refers to the fluctuation of the tachometer when the engine is idling, accompanied by engine shaking. There are many reasons for unstable idle speed, including: dirt, wear, or incorrect installation of mechanical parts, leading to changes in the power of individual cylinders, resulting in an imbalance of power among the cylinders and causing unstable idle speed; abnormal engine electronic control system, leading to poor combustion of the air-fuel mixture, making it difficult to balance the power of each cylinder, resulting in unstable idle speed. Idle speed refers to the operation of the engine without any load, only overcoming the internal friction resistance of the components, without outputting power externally. The minimum speed required to maintain stable engine operation is called idle speed. For an engine with good performance, the idle speed is generally between 550 to 800 revolutions per minute.

15

2

Share

How to Remove the Turn Signal Light on a Mondeo?

The steps to remove the turn signal light on a Mondeo are: 1. Open the engine hood and locate the three soft covers at the rear of the headlight assembly; 2. The left and right covers are for the low beam and high beam lights, and there is another cover below. Remove the cover and place it in a suitable position to prevent it from falling into the engine compartment; 3. There is a turn signal socket with a handle. Unscrew and pull it out, then rotate and remove the bulb. The Mondeo is a mid-size sedan under the Ford Motor Company, with dimensions of 4873mm in length, 1852mm in width, and 1470mm in height, and a wheelbase of 2850mm. The Mondeo is equipped with 1.5T and 2.0T high and low power turbocharged engines, with maximum power outputs of 181 horsepower and 204 horsepower, and maximum torques of 240 Nm and 350 Nm, respectively. It is paired with a 6-speed automatic transmission.

2

4

Share

What colors are available for the Trumpchi GS4?

Is It Normal for a Car's Exhaust Pipe to Leak Water?

What is the fuel tank capacity of the Mazda6 Atenza in liters?

Can You Continue Driving When the Vehicle Malfunction Light Comes On?

Why Does an Automatic Transmission Car Shudder When Starting?

What does unstable idle speed refer to?

How to Remove the Turn Signal Light on a Mondeo?

What Taxes and Fees Are Required When Purchasing a Car?

How to Set Up Automatic Window Lift for Camry?

What engine is used in the Changhe Q7?

What are the differences between the Mercedes-Benz C-Class and A-Class?