What colors are available for the Song MAX?

1 Answers
MiaLee
07/30/25 4:06am
The Song MAX comes in six colors: Ink Stone Blue, Diamond Blue, Crystal White, Amber Gold, Delan Black, and Rhea Silver. The Song MAX is an MPV model under BYD, featuring 6-seat and 7-seat layouts. It is equipped with a 12.8-inch central control screen, panoramic imaging, and matrix LED headlights. The Song MAX has a body length, width, and height of 4680mm, 1810mm, and 1680mm respectively, with a wheelbase of 2785mm. The entire Song MAX lineup is powered by a 1.5-liter turbocharged engine with the model code BYD476ZQB, delivering 160 horsepower and a maximum torque of 245 Nm. It features direct fuel injection technology and uses an aluminum alloy cylinder head and block.
Was this review help?
20
4
Share
More Forum Discussions

How to Check the Condition of Car Wiper Blades Regularly?

Here are the methods to check the condition of car wiper blades: 1. Lift the wiper blade and run your fingers along the cleaned blade. If the blade shows signs of aging, hardening, or cracking, it is unqualified and needs immediate replacement. 2. Set the wiper switch to different speed positions and check if the wiper maintains a consistent speed at each setting. 3. If the wiper blade exhibits uneven side-to-side movement, noise, abnormal jumping, incomplete contact with the windshield, poor cleaning performance, water film, fine streaks, or residue, it indicates damage or unqualified condition. 4. You can also assess the wiper blade's condition by listening for unusual sounds. If the wiper motor makes abnormal noises and fails to rotate, it suggests rusting or jamming in the mechanical transmission parts, indicating an unqualified wiper blade. In such cases, immediately turn off the wiper switch to prevent motor burnout.
17
4
Share

Do You Need to Press the Brake When Starting an Automatic Transmission Car?

Starting an automatic transmission car requires pressing the brake. The method for starting an automatic transmission car is as follows: 1. Before starting the car, ensure the gear is in P (Park) or N (Neutral). 2. When starting, coordinate the brake, handbrake, and accelerator properly. 3. After shifting to D (Drive), slowly release the handbrake while gently lifting the brake pedal (equivalent to slowly releasing the clutch in a manual transmission car), then lightly press the accelerator to allow the car to start smoothly. 4. Avoid stomping on the accelerator, as it not only wastes fuel but also damages the vehicle. Note: Do not release the brake pedal when shifting gears. 5. Without the engine running, the transmission fluid does not circulate, meaning internal components are not lubricated or cooled. Towing the car over long distances or at high speeds can cause wear and damage to the transmission.
13
2
Share

Reasons for Slow Engine Coolant Temperature Rise

The slow rise in car coolant temperature is generally caused by a damaged thermostat that fails to close, or a malfunctioning cooling fan that remains constantly running. Solutions for slow engine coolant temperature rise are as follows: 1. Check if there are issues with the cooling system, such as: whether the radiator shutter is blocked, if the fan blades are deformed, or if the coolant temperature sensor and its circuit are short-circuited. 2. The thermostat can be removed and inspected by placing it in water at different temperatures to observe its opening behavior. If it fails to open and close properly, the thermostat should be replaced. Additional Information: The car's temperature should not be too low or too high; it needs to be controlled within a certain range. The normal temperature is 90°C, which is the middle position on the temperature gauge. After starting the vehicle, the coolant temperature should rise quickly, and the pointer should reach the middle position. Once thermal equilibrium is achieved, the coolant temperature will no longer rise. It is best to start driving when the temperature reaches the middle position.
2
5
Share

Why Does the Tire Pressure Warning Keep Going Off?

Frequent tire pressure warnings indicate abnormal tire pressure, necessitating a check-up at a 4S shop. More information about tire pressure is as follows: 1. There is no fixed standard value for tire pressure; both overinflation and underinflation can shorten the tire's lifespan. 2. Underinflation increases tire body deformation, leading to sidewall cracks, excessive heat buildup, and accelerated rubber aging. It also increases the tire's contact area, speeding up shoulder wear. Overinflation causes excessive stretching of the tire cords, reducing the tire body's elasticity and increasing the load on the car while driving.
19
1
Share

What to Use to Clean Car Windows?

Using glass cleaner, soapy water, white vinegar, or dishwashing liquid can effectively clean car windows. More information about car windows is as follows: 1. Car windows are an essential part of a vehicle's body accessories, primarily serving a protective function. 2. There are three main types of car windows: laminated glass, tempered glass, and regional tempered glass, which can withstand strong impacts. 3. Car windows are categorized by their location: front windshield, side windows, rear windshield, and sunroof glass. 4. National regulations mandate that front windshields must be made of laminated glass, side windows are typically tempered glass, and rear windshields are usually tempered glass with electric heating wires.
14
2
Share

Do You Need to Remove the Transmission to Replace the Clutch Plate?

Replacing the clutch plate requires removing the transmission. The clutch plate needs to be replaced when the following situations occur in a car: 1. The vehicle does not stall when starting on a slope. If the vehicle does not stall or stalls with a delay when starting on a slope after releasing the clutch, it indicates severe wear of the clutch plate, which should be replaced immediately to prevent potential safety hazards. 2. The engine speed drops slowly after releasing the throttle. For example, if the engine speed is raised to around 3000 rpm by pressing the throttle while the car is stationary, and the engine speed does not drop immediately after releasing the throttle, the clutch plate should be replaced promptly. 3. The car does not accelerate despite pressing the throttle. If the engine speed increases when the throttle is pressed deeply, but the car's speed does not rise accordingly, the clutch plate needs to be replaced. Daily precautions for the clutch plate include: 1. For manual transmission cars, fully depress the clutch when shifting gears to prevent wear on the clutch plate. 2. For automatic transmission cars, avoid coasting in neutral to prevent damage to the transmission and clutch.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.