What colors are available for the NMAX155?

1 Answers
AaliyahFitz
07/29/25 7:59pm
There are three colors: blue, white, and black. Below are the advantages of the Yamaha NMAX155: 1. Flexible handling: Although the NMAX155 appears to be a comfort-oriented touring scooter, it actually has an equipped weight of only 130kg, comparable to most 125cc sport scooters on the market. Its 1340mm wheelbase is the same as the sixth-generation Cygnus, greatly enhancing agility. Whether commuting in the city or enjoying mountain roads during holidays, it offers drivers a highly enjoyable and effortless riding experience. 2. Fuel efficiency: The NMAX155 features Blue-Core energy-saving technology, combining high combustion efficiency, excellent cooling, and low power loss. Additionally, its idle stop system automatically shuts off the engine at red lights, and the SMG smart start system engages when restarting, directly driving the crankshaft to reduce vibrations and noise during startup. This is far more effective than the start-stop systems in most cars today, achieving a fuel efficiency of 45.2km/L. 3. Smooth power delivery: The NMAX155 is equipped with a 155cc Blue-Core liquid-cooled engine that balances efficiency and performance. Besides excellent fuel economy, it features VVA (Variable Valve Actuation), which bridges the power gap between low and mid-high RPMs, delivering a linear acceleration feel. Its high-RPM performance is particularly impressive, making it ideal for both city riding and short trips.
Was this review help?
9
3
Share
More Forum Discussions

How to Stitch the Steering Wheel Cover?

Steering wheel cover stitching method is as follows: First, cover the upper part of the steering wheel, use your legs to support the lower part, then double-thread the left and right sides of the steering wheel. Insert the needle into the inner thread of the cover and pull it tight, repeating this process until the stitching is complete. Relevant information about car steering wheels is provided below: Function: Its function is to convert the force applied by the driver to the edge of the steering wheel into torque and then transmit it to the steering shaft. Correct Grip: If the steering wheel is viewed as a clock face, the correct hand position is to place the left hand between the 9 and 10 o'clock positions and the right hand between the 3 and 4 o'clock positions. In the event of a collision, this posture is more conducive to supporting the body.
2
1
Share

Where is the frame number of Changhe Suzuki located?

Changhe Suzuki's frame number is located directly behind the engine. Meaning of the frame number: The Vehicle Identification Number (VIN), or frame number, is a unique set of seventeen letters or numbers used on automobiles to identify the manufacturer, engine, chassis serial number, and other performance data. Structure of the frame number: There are mainly two formats for Vehicle Identification Numbers. The first is the ISO 3779 standard adopted by the European Union, and the second is primarily used in North America, which is more stringent than the first but remains compatible with it.
20
2
Share

How Often Should the Focus Ignition Coil Be Replaced?

There is no fixed replacement interval for the Focus ignition coil; it needs to be replaced when it fails. Here is an introduction to the ignition coil: 1. The core components of the ignition system are the ignition coil and the switching device; 2. Increasing the energy of the ignition coil allows the spark plug to generate a spark with sufficient energy, which is a basic requirement for the ignition system to adapt to the operation of modern engines. Below is an extended guide on the steps for removing and installing the ignition coil: 1. Open the ignition coil cover on top of the engine; 2. Use a pentagon socket wrench to remove the ignition coil mounting screws; 3. Disconnect the ignition coil power plug; 4. Gently pry up the ignition coil with a screwdriver and remove it; 5. Install the new ignition coil and tighten the screws; 6. Reconnect the power plug and then replace the top cover.
11
0
Share

What causes the BMW E60 air conditioning fan speed adjustment to fail?

BMW E60 air conditioning fan speed adjustment failure may be caused by the following reasons: Insufficient refrigerant: The air conditioning pipes or condenser usually have minor leaks, causing the refrigerant to become insufficient after some time and requiring manual replenishment. Expansion valve or evaporator blockage: This leads to abnormal internal pressure, requiring repair at a service center. Dirty condenser: The main purpose of the condenser is heat dissipation. During spring, it is prone to accumulating substances like willow catkins, leading to poor cooling performance. Air conditioning system pipe leakage: This causes abnormal refrigerant evaporation or allows water to enter the pipes, resulting in poor refrigerant flow, increased resistance, and ultimately the air conditioning's inability to cool.
1
0
Share

What is the wheelbase of the Cadillac XT4?

Cadillac XT4 is a compact SUV with a wheelbase of 2779 mm. More details about the Cadillac XT4 are as follows: 1. The length, width, and height of the Cadillac XT4 are 4600 mm, 1881 mm, and 1627 mm respectively. 2. The Cadillac XT4 is equipped with a 2.0-liter turbocharged engine across the entire lineup, with a maximum power of 177 kW and a maximum torque of 350 Nm. The engine reaches its maximum power at 5000 rpm and its maximum torque between 1500 and 4000 rpm. This engine features a variable valve management system and direct fuel injection technology, and it uses an aluminum alloy cylinder head and block. The engine is paired with a 9-speed automatic transmission.
14
4
Share

Can Scooter Motorcycles Go on Highways?

It depends on the motorcycle's speed. Motorcycles with a designed maximum speed below 60 km/h are not allowed on highways; those exceeding 60 km/h are not prohibited by laws and regulations. Here are the details: Traffic Law: Article 67: Pedestrians, non-motor vehicles, tractors, wheeled special machinery vehicles, articulated buses, full trailers, and other motor vehicles with a designed maximum speed below 70 km/h are not permitted to enter highways. Conditions for Motorcycles on Highways: Motorcycles must travel in the far-right lane, with a speed not less than 60 km/h and not exceeding 80 km/h. Riders must wear helmets, have complete licenses and insurance, and are not allowed to carry passengers.
19
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.