What colors are available for the Lexus ES?

2 Answers
SanLaila
07/24/25 5:18am
Lexus ES offers the following colors: Sonic Quartz White, Deep Green Mica, Autumn Shimmer, Blue Flame, Platinum Silver, Molten Pearl, Sonic Titanium, Ultra Blue, Mercury Gray Mica, Crystal White, and Obsidian Black. The Lexus ES is equipped with a 2.0L L4 naturally aspirated engine, delivering a maximum torque of 208 Nm and a maximum horsepower of 173 hp, paired with a CVT continuously variable transmission. The dimensions of the Lexus ES are 4975mm in length, 1866mm in width, and 1447mm in height, with a wheelbase of 2870mm. It has a top speed of 205 km/h. The front suspension features a MacPherson strut with a stabilizer bar, while the rear suspension uses a multi-link independent setup.
Was this review help?
20
0
Share
Will
08/11/25 1:01am
I think the Lexus ES offers a rich selection of colors. As someone who enjoys keeping up with new cars, I often browse through the configuration sheets. I remember there's Atomic Silver, which has a cool metallic reflective tone; Sonic Quartz White, eye-catching and makes the car appear larger; Deep Blue Sapphire, dignified and elegant; Lava Orange, full of energy; Graphite Black, classic and timeless; Iridium Silver, a stylish gray tone; and Matador Red, passionate and bold. When choosing a color, consider personal style and practicality. For example, younger people might opt for orange to stand out, while family cars could go for silver or white for easier maintenance. I recommend visiting the showroom to see how the colors look under different lighting conditions.
Was this review help?
18
2
Share
Expand All
More Forum Discussions

How to Check if There is a Tracker on Your Car

There are several methods to check if there is a tracker on your car: 1. Directly search the car (strong magnet, non-installation type): As we all know, to avoid being found, people will try to install or place GPS trackers in some relatively hidden locations, such as near the front and rear bumpers, inside and outside the doors, etc. However, this also makes these so-called hidden locations actually common knowledge. 2. Follow the clues and check the wiring (wired type): Currently, most GPS trackers on the market are still wired and need to be connected to the car's power supply to function. Therefore, to find a GPS tracker installed by someone, searching along the car's power lines is also a feasible method. However, this requires more professional personnel, otherwise, you may not know the location of the power lines. 3. Check the OBD interface (OBD interface type): Nowadays, many OBD devices have functions such as vehicle fault diagnosis, anomaly detection, positioning, and driving records. For example, the Music Position Locator Smart Diagnostic Terminal can not only detect various fault codes in the vehicle but also perform positioning. By plugging into the OBD interface, functions such as point naming, timed tracking, fuel consumption analysis, and driving optimization can be used. Therefore, when searching, the OBD interface should also be checked.
8
0
Share

How Long Can You Drive After a Mushroom Plug Tire Repair?

As long as it is not punctured again, a mushroom plug tire repair can last until the tire is completely worn out. Here is some extended information about mushroom plug tire repairs: 1. Mushroom Plug Tire Repair: As the name suggests, this method uses a mushroom-shaped rubber patch. The repair involves locating the puncture from inside the tire, threading the 'stem' of the mushroom through the hole, trimming the excess part outside, and then securing the inner part with special adhesive. The stem part acts as an external patch, while the cap part functions as an internal patch. This method takes longer and is more expensive than regular tire repairs, but it offers better and more durable results. 2. Precautions for Mushroom Plug Tire Repair: If the tire puncture diameter exceeds 6mm, it is advisable to avoid driving on highways after the repair, as high speeds can cause the repair to crack. Additionally, if the tire has been repaired more than twice, even if the puncture diameter is less than 6mm, it is best to avoid highways due to the increased risk of a blowout, which poses a safety hazard.
17
3
Share

Do I Need to Replace the Filter When Changing Transmission Fluid?

Generally, it is necessary to replace the filter when changing transmission fluid. Here is the relevant information: 1. Function of the Filter: During vehicle operation, friction between mechanical metal components inside the transmission can generate impurities and metal debris. The transmission fluid filter is designed to filter out iron filings, sediment, and other impurities from the transmission fluid, supplying clean fluid to various components to ensure lubrication and cleanliness. 2. Replacement Interval: The replacement of the transmission filter depends on the transmission fluid change schedule, as they should be replaced together. Transmission fluid is categorized into automatic and manual types. Automatic transmission fluid typically requires replacement every two years or approximately 40,000-60,000 kilometers, while manual transmission fluid should be replaced every three years or 60,000-80,000 kilometers. The transmission filter should be replaced along with the transmission fluid.
14
4
Share

What are the symptoms of a faulty igniter?

The symptoms of a faulty igniter are as follows: 1. Sudden engine stall when using the igniter: There is no obvious pattern, and the issue is resolved after replacing the breaker points. This is usually caused by poor contact in the igniter circuit or damaged wires grounding. 2. Unstable braking and other phenomena after prolonged driving: The condition returns to normal after cooling down for a while, and this does not occur with breaker points. This is typically due to high-speed misfiring in the igniter chip, requiring igniter replacement. 3. Unstable idle speed during startup and severe engine shaking when accelerating: Sometimes accompanied by backfiring from the exhaust pipe, with no improvement after adjusting the ignition timing. This is generally caused by reversed connections of the sensor's red and black wires. 4. Difficulty starting the car in cold weather when using the igniter: Normal starting with breaker points, but abnormalities can be detected using methods like push-starting or towing. This is usually due to excessive sensor gap. If the gap is normal, observe whether the starter motor rotates properly during startup. If the rotation is too slow, it may be due to starter motor issues, low battery charge, or poor wire grounding.
13
1
Share

Can You Use S Gear on the Highway?

You can use S gear on the highway, but it will significantly increase fuel consumption and put more load on the transmission, leading to accelerated wear. Below is an extended explanation: 1. Avoid prolonged use of S gear: S gear is the car's sport mode. In this mode, the transmission can shift freely, but the shifting timing is delayed, keeping the engine at higher RPMs for longer periods. This allows the car to operate at lower gears with higher RPMs, resulting in greater torque output and acceleration. Since S gear only delays upshifting without altering other operational aspects, it inevitably increases the transmission load in the short term, raises temperatures, and accelerates wear. 2. Fuel consumption: Due to increased fuel injection at high RPMs, S gear mode consumes much more fuel than normal mode. 3. Benefits: Using S gear also has advantages. For cars frequently driven in congested urban areas, engine carbon buildup can be significant. Therefore, periodically using S gear can help remove carbon deposits, improve fuel economy, and extend engine life.
20
3
Share

Can a Dented Trunk Be Restored?

A dented trunk can be restored. Depending on the location and size of the dent, the price may vary. 1. Difference in effect: After repair, it will not look exactly the same as the original. This is because the metal sheet is filled with putty and repainted. The final result may differ based on the skill of the technician. 2. Paint difference: Whether the paint is done at an external shop or a 4S store, it will not match the original high-temperature baked paint. The quality of the paint may also differ. 3. Reversing caution: When reversing, always ensure there are no obstacles (pedestrians, stones, etc.) around the vehicle before proceeding.
16
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.