What colors are available for the Changan CS15?

What is the Difference Between Iridium and Platinum Spark Plugs?

Differences between iridium and platinum spark plugs: 1. Different hardness: Iridium spark plugs have higher hardness, better durability, and longer service life; platinum spark plugs have lower hardness. 2. Different ignition speeds: Iridium spark plugs ignite faster; platinum spark plugs ignite slower. 3. Different melting points: Under high-temperature conditions, iridium spark plugs can maintain more stable ignition performance, their center electrodes can be made thinner, require lower ignition voltage, and exhibit improved discharge performance; platinum spark plugs have a lower melting point than iridium, but under normal conditions, platinum spark plugs can also deliver excellent performance. Moreover, platinum spark plugs aim for stable performance, and under normal circumstances, most can last up to 100,000 kilometers.

9

0

Share

What is the reason for the insufficient brightness of the Envision's central control screen?

The insufficient brightness of the Envision's central control screen is due to the light sensor automatically adjusting the screen brightness, which will become brighter or darker according to the intensity of the ambient light. Envision central control features: The Buick Envision introduces a newly designed 10-inch high-definition touchscreen, equipped with Buick eConnect 2.0 connectivity technology, supporting features including Super ID personal account, remote upgrades, WeChat music and location sharing, cloud-based intelligent voice interaction, and fleet connectivity functions. Central control screen brightness adjustment: The Buick Envision uses the adjustment wheel on the left front panel of the cabin to adjust the brightness of the instrument panel and the central control screen.

4

1

Share

Steering Wheel Makes Noise When Turning?

The causes and solutions for steering wheel noise when turning are as follows: 1. Noise coming from inside the steering wheel. Solution: Remove the steering wheel airbag clock spring and apply butter; replace the airbag clock spring if severely damaged. 2. Aging of the tie rod end. Solution: Replace the tie rod end and perform a wheel alignment after replacement. 3. Noise from the stabilizer bar. Solution: If the stabilizer bar bushings are loose, they can be fixed by adding shims; if damaged, they must be replaced. 4. Noise from the shock absorber top bearing. Solution: Apply some butter to the top bearing; if ineffective, replacement is necessary.

9

5

Share

How to Deal with Severe Shaking During Manual Transmission Startup

Manual transmission startup shaking severe processing method is as follows: 1. Check the vehicle's transmission oil and replace it as needed. There are two ways to replace transmission oil: one is manual replacement, and the other is using 4S shop equipment. 2. Check if there are any issues with the vehicle's transmission. If problems are found, replace it as soon as possible. 3. Inspect the vehicle's engine. If the issue persists, check the engine throttle for problems. If issues exist, they may cause corresponding vehicle conditions, and immediate 4S shop maintenance is recommended.

10

2

Share

Where is the jack of the new Vios located?

The jack of the new Vios is located under the cover at the bottom of the trunk. Usage precautions: Before using the jack, park the car properly, turn off the engine, and place a safety warning triangle 50-150 meters behind the vehicle. Do not apply excessive force during operation, as the jack may easily deform. Function of the new Vios jack: The jack is used to lift the vehicle when changing tires. It consists of a turning mechanism, rack, and gear. By turning the rack, it lifts and supports the vehicle. It has a simple structure, small size, and limited load-bearing capacity.

3

1

Share

What Causes the Turn Signal Failure in BMW 5 Series?

Here are the specific reasons for turn signal failure in BMW 5 Series: Relay damage or fuse blowout: When turning on the left/right turn signals or hazard lights, the turn signals don't illuminate. This situation is generally caused by a damaged flasher relay or a blown turn signal fuse. After carefully checking the turn signal circuit for short circuits, simply replace the turn signal fuse. Poor contact: When activating turn signals on one side, the flashing frequency differs between left and right sides. This phenomenon is mainly caused by different power levels in the left/right turn signal bulbs or poor contact somewhere in the turn signal circuit.

16

5

Share

What colors are available for the Changan CS15?

What is the Difference Between Iridium and Platinum Spark Plugs?

What is the reason for the insufficient brightness of the Envision's central control screen?

Steering Wheel Makes Noise When Turning?

How to Deal with Severe Shaking During Manual Transmission Startup

Where is the jack of the new Vios located?

What Causes the Turn Signal Failure in BMW 5 Series?

What Does Compulsory Vehicle Insurance Cover?

How to Turn Off the Vehicle Stability System Light?

Why do the headlights stay on during the day when set to auto?

What does the REST function in air conditioning mean?