What colors are available for the Baojun RM5?

Can the 1.4T Lavida use 92-octane gasoline?

1.4T Lavida can use 92-octane gasoline, which is suitable for gasoline-powered vehicles with an engine compression ratio between 8.6 and 9.9. Characteristics of 92-octane gasoline: 1. Reduced emissions; 2. Good power performance; 3. Reduced carbon deposits; 4. Convenient to use; 5. Self-cleaning fuel system. The 1.4T Lavida is a sedan produced by SAIC Volkswagen, with exterior dimensions of 4670mm in length, 1806mm in width, and 1474mm in height, a wheelbase of 2688mm, and a body structure of a 4-door, 5-seat sedan. It is equipped with a 7-speed dual-clutch transmission and a 1.4T L4 engine, delivering a maximum torque of 150 Nm and a maximum power of 110 kW.

9

3

Share

Is it easy to replace the clutch slave cylinder on a Haval H6?

Easy to replace. Here are the relevant details: Location of the clutch slave cylinder: The clutch slave cylinder is located at the lower right side of the engine compartment. It is easiest to see when the vehicle is lifted. Simply remove the screws to access it. Precautions: If the clutch master cylinder, slave cylinder, or pedal adjustment is improper; if the release bearing lacks lubrication or fails, if the release bearing sleeve is stuck, if the release fork is cracked or deformed, if the transmission's first shaft is twisted, if the clutch assist slave cylinder fails, or if the assist slave cylinder rocker arm is loose, the clutch may malfunction or fail in a very short time, potentially leading to vehicle or personal accidents. Under normal usage conditions, the lifespan of the clutch is at least 50,000 kilometers for the pressure plate assembly and at least 30,000 kilometers for the driven plate assembly.

16

5

Share

What are the 'Three Touches and One Belt' in Subject Three?

The 'Three Touches and One Belt' in Subject Three refers to the preparatory actions before starting the vehicle, with variations in different regions. It involves touching the sensors on the rearview mirror, the left side mirror, and under the seat, adjusting the seat to a comfortable position, fastening the seatbelt, igniting the engine, turning on the low beam headlights, and beginning the nighttime simulated lighting test. Confirming Surrounding Safety: In some areas, pressing the sensors is not required, but walking around the vehicle remains essential. First, ensure the surrounding environment is safe. Even the most advanced radar and reversing camera systems have blind spots, making personal observation crucial. Due to the vehicle's large size, sitting inside does not provide a full view of the entire vehicle. Checking Tire Condition: Tire condition directly impacts driving safety. Bulges or insufficient tire pressure during use can easily lead to blowouts, which may cause serious accidents. Walking around the vehicle also helps detect any foreign objects like nails that could puncture the tires. Early Detection of Vehicle Scratches: When parked on public roads or in parking lots, vehicles are vulnerable to unexpected damage.

8

5

Share

What happens if power steering fluid is never changed?

Not changing the power steering fluid for a long time can lead to heavier steering wheel operation, and in severe cases, may cause damage to the steering gear. The method for replacing power steering fluid is as follows: 1. Prepare a bottle of original power steering fluid; 2. Open the cap of the power steering fluid reservoir; 3. Lift the vehicle and remove the underbody guard; 4. Use pliers to loosen the oil pipe clamp and move it aside; 5. Disconnect the oil pipe to drain the fluid; 6. Turn the steering wheel left and right to expel the old power steering fluid; 7. After draining the fluid, reinstall the power steering pipe to its original position and secure the clamp back in place; 8. Lower the vehicle, add new power steering fluid while turning the steering wheel; 9. Use an oil extractor to remove surface foam, start the vehicle and turn the steering wheel left and right 4 to 5 times to expel air; 10. After expelling air, turn off the engine and check if the fluid level is normal; 11. Start the vehicle, lift it to check for any oil leaks or seepage from the power steering pipe, clean any oil stains, and reinstall the underbody guard.

15

2

Share

What is the fuel tank capacity of the Chery QQ in liters?

There are 4 models of the Chery QQ, classified as microcars, with a fuel tank capacity of 35 liters. The vehicle is equipped with a 1.0L 69-horsepower L3 engine. The transmission options include a 5-speed manual and a 5-speed mechanical automatic, with a naturally aspirated 1.0-liter intake form. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity specified by the car manufacturer is measured from the bottom of the tank to the safety limit, and there is additional space from the safety limit to the tank opening. This space ensures that the fuel inside the tank can expand when the temperature rises without overflowing. If fuel is filled up to the tank opening during refueling, the actual refueling amount may exceed the calibrated tank capacity. Maintenance of the fuel tank includes the following: Drain accumulated water and sediment from the tank, and check for oil leaks at the fuel pipe joints and switches. For fuel tank caps equipped with air and vapor valves, also check if the ventilation holes are clear. The filter screen at the fuel filler neck should remain intact to prevent impurities from entering the tank during refueling and clogging the fuel lines. The sealing gasket on the fuel filler cap should also be intact to prevent fuel from spilling out while driving.

10

4

Share

What is the normal tire pressure for a Civic?

Honda Civic's normal tire pressure is around 2.2-2.5 BAR. The 10th-generation Civic is equipped with a tire pressure monitoring system, which differs from directly measuring each tire's pressure. The tire pressure monitoring system monitors the vehicle by comparing the rolling radius and rotational characteristics of each wheel and tire. While driving, it determines whether one or more tires are significantly underinflated. This will cause the low tire pressure/tire pressure monitoring system indicator light to illuminate, and a message will appear on the driver information interface. The tire pressure monitoring indicator light will turn off automatically after driving once the tire pressure returns to normal. Precautions: A car's tire pressure undergoes subtle changes as driving mileage increases. Therefore, drivers should regularly monitor tire pressure. If the tire pressure is too high, it reduces the contact area between the tire and the ground, increasing braking distance and compromising safe driving. If the tire pressure is too low, driving too fast or for too long can cause the tire sidewall to rupture or even lead to a blowout. Low tire pressure accelerates tire wear, increases the risk of blowouts, and raises fuel consumption. High tire pressure reduces tire grip and accelerates wear, weakening braking performance. Cold and hot tires have different pressures, which is especially important to note during measurement. Typically, hot tire pressure is about 0.2 bar higher than cold tire pressure. If measuring hot tire pressure, subtracting 0.2 bar will give the cold tire pressure value.

12

1

Share

What colors are available for the Baojun RM5?

Can the 1.4T Lavida use 92-octane gasoline?

Is it easy to replace the clutch slave cylinder on a Haval H6?

What are the 'Three Touches and One Belt' in Subject Three?

What happens if power steering fluid is never changed?

What is the fuel tank capacity of the Chery QQ in liters?

What is the normal tire pressure for a Civic?

How to Open the Q5 Trunk?

What are the differences between the new and old Citroën models?

What to Do When Fuel Pump Pressure is Low?

What is the original tire model of Wuling Hongguang?