What color seat covers go well with black interior?

Can you change lanes on a dashed line in a tunnel?

Tunnel dashed lines do not allow lane changes. Here are the precautions for driving in a tunnel: Approaching the tunnel: Carefully observe traffic signs or information boards. Trucks should pay special attention to height restrictions, and vehicles exceeding the height limit are strictly prohibited from entering the tunnel. Do not rely on intuition to judge speed while driving in a tunnel; always confirm your speed using the speedometer and maintain an appropriate following distance. Reduce driving speed: Due to the difference in brightness inside and outside the tunnel, the human eye undergoes a dark adaptation process when entering the tunnel and a light adaptation process when exiting. During these processes, the driver's vision is impaired, so it is necessary to slow down. No unauthorized parking: Since tunnels are narrower than the road outside, especially the shoulder width, which is designed based on the minimum basic width, parking is strictly prohibited inside the tunnel to avoid traffic congestion. If a vehicle breaks down in the tunnel, immediately notify the tunnel entrance and arrange to have the vehicle towed out; do not attempt repairs inside the tunnel.

8

2

Share

Is it serious if a car's chassis gets exposed to seawater?

It is serious if a car's chassis gets exposed to seawater. From a chemical perspective, seawater is an electrolyte, while most components of a car's chassis and other parts are made of alloys. This usually leads to galvanic oxidation-reduction reactions, accelerating metal corrosion, which is detrimental to the vehicle. It is recommended to wash the car immediately and take protective measures, such as applying paint. Avoid using high water pressure when washing the car: At professional car washes, the water gun settings are crucial. Generally, the water pressure should be between 4-7Mpa. If the pressure is too low, it won't clean effectively; if too high, the water flow may carry paint surface particles that could impact the paint layer, causing damage. Avoid washing the car under direct sunlight: After rinsing the car body, water droplets can form convex lenses on the surface, focusing sunlight on the car body. Over time, this can cause the paint to lose its luster. The same applies to waxing—try to do it on cloudy days or indoors.

3

Share

What is the fishbone line traffic sign?

Highway fishbone line markings are called deceleration markings, mainly used to remind drivers to slow down. Location of fishbone line markings: Deceleration markings are usually set at bridge approaches and turns. Their main function is to create a sense of compression by visually narrowing the lane, prompting drivers to automatically slow down at curves, slopes, and other locations where deceleration is required. Meaning of highway fishbone lines: They indicate the need to slow down. Fishbone lines consist of alternating dashed and solid lines with varying spacing, creating a gradual narrowing-to-widening effect. This marking design aims to help drivers adapt to the deceleration process, serving as a reminder to begin slowing down.

12

1

Share

Can You Directly Add Coolant If It's Low?

You cannot directly add coolant if it's low. It is appropriate to add coolant when it is below the standard level, filling it up to the "MAXT" mark on the reservoir. Coolant is a special additive-containing liquid primarily used in liquid-cooled engine cooling systems. It provides excellent performance in preventing freezing in winter, boiling in summer, and protecting against scale and corrosion year-round. Method for Replacing Coolant: Before completely replacing the coolant, conduct a thorough inspection to check for any leaks or cracks in the pipelines, with a focus on the five-way hose. The five-way hose is named for its five connections to various parts of the engine. Coolant flows through the five-way hose and is distributed to different parts of the car to function. If there are signs of coolant leakage in this area, replace the hose or re-secure the connections as needed. Drain the old coolant, then flush the liquid channels with clean water. Add clean water to the coolant reservoir and continue filling it to allow the water to flow continuously through the engine cooling system. Start the engine and let it idle for 3 to 5 minutes to circulate the water. Initially, the water flowing out will have a faint pink color. Continue adding clean water until the outflow is clear. Note: Remember to remove the heater hose to drain all the water from the heater. After draining for about an hour, add the new coolant through the radiator hose to allow it to flow quickly into the radiator. Then, add another bottle of coolant to the reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. At this point, the coolant level will drop slightly as air is expelled from the cooling system. Add more coolant until it reaches the "MAXT" mark on the reservoir.

1

5

Share

How to Turn Off the Auto Start-Stop Function in Volkswagen Tiguan L

Volkswagen Tiguan L's auto start-stop function is located to the left of the gear lever on the center console. To turn it off, simply press the designated button. Here is some information about the auto start-stop feature: 1. Auto start-stop temporarily shuts off the engine (e.g., at traffic lights), during which you must keep the brake pedal depressed and cannot release it. Releasing the brake pedal will restart the engine. 2. The auto start-stop function can only be permanently disabled by reprogramming the vehicle's code. Normally, the driver needs to manually turn it off each time they use the car. 3. When the battery charge is less than 60%, the auto start-stop function enters a dormant state.

12

5

Share

What are the consequences of spraying coating agent on the windshield?

It can cause the glass to become rough and increase the friction coefficient, but the coating can be washed off, causing little damage to the glass. The related introduction of coating is as follows: Coating Introduction: Automobile coating is a paint protection project that applies non-petroleum environmentally friendly materials such as glass cellulose, silicon polymers, fluorine polymers, and high-purity water to evenly coat the paint surface with a hard, oxidation-resistant inorganic film. Through a chemical reaction with the paint, it forms a glass protective layer that shields the paint from external damage, enhances paint hardness and brightness, and makes the car body smoother and more lustrous. Coating Function: Automobile coating agents differ from car wax in that their molecules are smaller, allowing them to form a tighter and more durable protective layer on the car's paint surface. This layer can repel water, resist acid rain, block UV rays, and prevent paint oxidation and fading.

15

2

Share

What color seat covers go well with black interior?

Can you change lanes on a dashed line in a tunnel?

Is it serious if a car's chassis gets exposed to seawater?

What is the fishbone line traffic sign?

Can You Directly Add Coolant If It's Low?

How to Turn Off the Auto Start-Stop Function in Volkswagen Tiguan L

What are the consequences of spraying coating agent on the windshield?

Are 7-seater vehicles free on highways during toll-free periods?

What car has the L logo?

Will driving on the highway without compulsory traffic insurance be detected?

Where is the Problem When Car Exhaust Smells Pungent?