What color is the fuel indicator light of the BAIC Weiwang M30?

1 Answers
AngelinaRose
07/29/25 5:20pm
The fuel indicator light of the BAIC Weiwang M30 is yellow. When the fuel indicator light comes on, it means it's time to refuel. The BAIC Weiwang M30 is a microvan with dimensions of 4510mm in length, 1705mm in width, and 1810mm in height, and a wheelbase of 2790mm. In terms of suspension, the front suspension of the BAIC Weiwang M30 uses a MacPherson independent suspension, while the rear suspension uses a leaf spring suspension. For power, this vehicle is equipped with a 1.5-liter naturally aspirated engine across all models, delivering a maximum horsepower of 116 and a maximum torque of 150 Nm. The engine also features multi-point fuel injection technology and uses an aluminum cylinder head and block.
Was this review help?
11
0
Share
More Forum Discussions

What Are the Reasons for Car Headlights Not Working?

Car headlights not working can be caused by the following reasons: 1. There are many reasons that can cause car headlights not to work, including: burnt-out bulbs, overheating wires, damaged relays or combination switches, open or short circuits in wiring, blown fuses, and poor contact in circuits. The first step should be to check if the fuse is intact, as sudden headlight failure is often due to a blown bulb fuse. 2. If the headlight bulb lights up briefly and then turns off when the headlights are switched on, it may be due to poor connection or a short circuit in the wiring. Short circuits can easily cause bulbs to burn out. 3. If the car headlights suddenly stop working, it is important to address the issue promptly. It is recommended to visit a reputable and professional repair shop or a 4S store for inspection and repair to ensure better reliability.
14
2
Share

What does p0088 fuel rail system pressure too high mean?

p0088 fuel rail system pressure too high can be caused by the following reasons: 1. The automotive trouble code p0088 indicates poor fuel trim (air-fuel ratio). You should focus on checking the fuel pressure, whether there are leaks or blockages in the intake system, and whether the sensors measuring intake air volume are damaged. Poor fuel quality could also be a reason. 2. The p0088 group of automotive trouble codes indicates the fuel mixture is too rich. 3. The p0088 group of trouble codes for rich fuel mixture means the oxygen sensor detects too little oxygen (excess gasoline) in the exhaust.
18
0
Share

What is the difference between blind spot monitoring and lane change assist?

Lane change assist is essentially blind spot monitoring; there is no difference between the two. Here are the details: 1. Lane change assist can also be referred to as blind spot monitoring. This system typically consists of hidden sensors in the rear of the vehicle and indicator lights on the A-pillar or other methods to alert the driver of approaching vehicles from behind. 2. For both novice and experienced drivers, blind spots during lane changes are difficult to eliminate. Due to vehicle design limitations, the visual range provided by side mirrors always includes some blind spots. Drivers cannot constantly turn their heads to check, as this would increase driving risks. Therefore, the lane change assist system was developed, operating on a principle similar to that of parking sensors. 3. When changing lanes, if a vehicle is approaching from behind, the lane change assist system will issue an alert to the driver, ensuring safe lane changes.
6
2
Share

Are headlights low beam or high beam?

Headlights usually refer to high beams, which are primarily used for illumination during nighttime or in weather conditions requiring visibility such as heavy fog or rain. Here are some details about automotive headlights: 1. Automotive headlights are like the eyes of a person, closely related to safe driving. 2. Automotive headlights serve two main purposes: one is to provide illumination for the driver, lighting up the road ahead to ensure good visibility during poor weather or at night; the other is to serve as a warning signal, alerting vehicles and pedestrians ahead.
11
1
Share

What does Smart on the car mean?

Smart on the car means "Smart" mode, which is the default driving mode of the Fista car. Extended relevant information is as follows: 1. The Smart system will adapt and adjust according to the current driving habits. 2. Under normal driving conditions, the smart on the car dashboard is displayed in white font. When the accelerator is pressed deeply several times, the system will judge it as aggressive driving, and the SMART on the dashboard will turn into red font. The system will automatically adjust the gear and power. 3. After driving smoothly for a short period, the font will turn white again, returning to the normal driving mode. Smart mode is a relatively intelligent system mode.
14
5
Share

What does the odo value on a car mean?

ODO refers to the car's current total mileage, which cannot be reset and is measured in kilometers. Its purpose is to inform the driver of the distance traveled, allowing for fuel cost calculations and indirectly reflecting the vehicle's fuel efficiency. In contrast, TRIP refers to the short-distance journey of the car, also known as the trip meter. Its main function is to calculate the mileage of each trip before setting out, and it can be reset. Below are the methods to reset TRIP data: 1. On the average fuel consumption, driving time, or average speed page, press and hold the "TRIP" button to reset the relevant data. 2. Alternatively, press and hold the "TRIP" button on the range interface to reset the trip meter.
3
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.