What color are the license plates for new energy vehicles?

1 Answers
AnthonyRose
07/29/25 9:25am
New energy vehicle license plates come in the following colors, as detailed below: 1. Blue license plates represent ordinary small cars, including small-tonnage trucks. 2. Yellow license plates represent large trucks, trailers, and other large vehicles, as well as training vehicles, engineering vehicles, motorcycles, or vehicles longer than 6 meters. 3. Green license plates represent new energy vehicles. 4. New energy vehicle license plates are divided into small new energy vehicle license plates and large new energy vehicle license plates. Small new energy vehicle license plates feature a gradient green color, while large new energy vehicle license plates use a yellow-green dual-color scheme. Here are the relevant details about new energy vehicle license plates: 1. New energy vehicle license plates embody the concept of "green environmental protection," with green as the main color. They include special identifiers and utilize new anti-counterfeiting technologies and manufacturing processes, enabling both differentiated management and easy identification while highlighting the characteristics of new energy and technological innovation. 2. Small new energy vehicle license plates use a gradient green background, while large new energy vehicle license plates use a yellow-green dual-color background. 3. New energy vehicle license plates have one additional digit compared to ordinary vehicle license plates. The number of digits increases from 5 to 6, expanding the capacity of license plate numbers and enriching resources. The encoding rules are more scientific and reasonable, meeting the need for "fewer letters and more numbers" in the arrangement. 4. Special license plates for new energy vehicles are different from ordinary common vehicle license plates.
Was this review help?
16
4
Share
More Forum Discussions

What is the oil specification for the Volkswagen Lavida?

Volkswagen Lavida uses fully synthetic 5W40 engine oil with a capacity of 5 liters, and the replacement interval is 10,000 kilometers. Below is extended information about engine oil: Precautions for oil change: Before changing the oil, the engine should be turned off for half an hour to allow excess oil to flow back from the cylinder walls to the oil pan, ensuring complete drainage. Different types of oil should not be mixed. If switching from premium to regular oil, the original oil must be completely drained and the lubrication system thoroughly cleaned before adding new oil. Oil selection method: Engine oil should be selected according to the engine's requirements. If the engine is in good condition and the seasonal temperature is low, lower viscosity oil should be used to ensure smooth oil flow. During high-temperature seasons or when the engine is severely worn, higher viscosity oil is preferable as it helps form a protective oil film and reduces engine wear.
7
5
Share

What is the fuel consumption of the Ford Mondeo 1.5t?

The fuel consumption of the Ford Mondeo 1.5t is 8.5 liters per 100 kilometers. The following are the reasons for high car fuel consumption and fuel-saving methods: Reasons for high car fuel consumption: Long warm-up periods, which can easily produce more carbon deposits, and the engine will inject more fuel to maintain operation at low temperatures; long-term short-distance driving; carrying heavy objects in the car for a long time; low tire pressure; frequent aggressive driving; driving with windows open at high speeds; driving in too low or too high gears. Fuel-saving methods: Avoid slamming the accelerator when starting, smooth acceleration and steady driving are the most fuel-efficient; observe the road conditions ahead in congested areas to avoid sudden braking, which not only saves fuel but also reduces vehicle wear; regularly clean the trunk; avoid coasting in neutral.
11
2
Share

How to Adjust the Clutch Pedal Height?

Clutch pedal height adjustment can be done using the following methods: 1. Locate the clutch master cylinder behind the clutch pedal and remove it first. 2. There is a notch on the push rod; insert a small wrench into the notch to rotate the push rod. 3. Use another wrench to loosen the positioning nut on the push rod. After loosening the nut, adjust the positioning nut to the very end of the thread, then you can rotate the push rod. 4. When operating inside the car, use the wrench to rotate continuously; the push rod will gradually become shorter, then tighten the positioning nut. Clutch height adjustment mainly involves the clutch control part. Mechanical clutches allow height adjustment, which can be achieved by adjusting the tightness of the clutch cable. Hydraulic clutches do not allow height adjustment.
12
3
Share

What is the difference between car primer and topcoat?

The car primer and topcoat have the following differences: 1. The main components of car primer and topcoat are different. The primer consists of four parts: resin, solvent, filler, and additives. 2. The topcoat is composed of three parts: resin, solvent, and additives. The main difference from the primer is that the topcoat has very little or no filler added, and their functions are also different. Below is an introduction to primer and topcoat: 1. The function of the topcoat: It has scratch resistance, gloss hardness, transparency, hand feel, aging resistance, and yellowing resistance. These are mainly reflected in the topcoat, and the quality of the topcoat directly affects the quality of the entire paint film. 2. The function of the primer is as follows: It fills the capillary pores in the steel plate, making it easy to apply paint on the surface, ensuring that the topcoat can tightly adhere to the car's surface. The primer contains a lot of powder material, which provides thickness to the paint.
15
3
Share

What does Prado 2ndstrt mean?

Prado 2ndstrt means starting in second gear. The following is a related introduction to starting in second gear: The function of starting in second gear: After turning on this switch, the automatic transmission starts in second gear. Its main function is to be used on slippery roads to prevent the high torque of first gear from causing wheel spin, similar to the function of TRC (Traction Control). The hazards of starting in second gear: The main hazards of starting in second gear: The biggest damage is to the clutch disc, as the wear is most severe in the semi-clutch state; it wastes fuel because increasing the throttle in the semi-clutch state causes much of the fuel to only make the engine idle without converting into forward motion; it is prone to stalling and carbon buildup. If the throttle is not increased sufficiently during startup, it can lead to insufficient power, resulting in incomplete combustion, carbon buildup, and even engine knocking.
9
1
Share

What kind of oil should be used for the Buick Regal 1.6t?

The Buick Regal 1.6t uses 5W-30 full synthetic oil. Below are the classifications of engine oil and the correct usage methods: Classifications of engine oil: Engine oil is divided into conventional mineral oil, semi-synthetic oil, and full synthetic oil. Mineral oil is a commonly used lubricant on the market. Semi-synthetic oil is made from semi-synthetic base oil, which is a product purified from mineral oil through hydro-cracking technology. Full synthetic oil is the highest-grade oil among engine oils. Correct usage methods of engine oil: It is essential to use engine oil of the appropriate quality grade, as this is key to ensuring the normal operation of the engine. If the oil supply is delayed or no suitable oil is available, substitute oil can be used. However, during use, it is necessary to closely monitor the oil quality and check whether the oil filter is clogged. Any issues should be addressed promptly. Choose oil with the appropriate viscosity according to the local temperature. When changing the oil, ensure that the used oil is completely drained.
3
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.