···
Log in / Register

What clothes are not allowed to wear for the Subject 2 test?

3 Answers
ElianaMarie
07/29/25 11:42am
In essence, there are no specific restrictions on what clothes you cannot wear for the Subject 2 test, and there are no particular limitations on clothing colors. However, driving without wearing a shirt is considered uncivilized driving and constitutes a violation. Below are the relevant details: 1. Reason: Article 26, Chapter 3 of the "Regulations on Road Traffic Safety of the People's Republic of China" stipulates that drivers must not be shirtless, wear slippers, or high heels while operating a vehicle. 2. Relevant regulations: When driving a vehicle, you must carry your driver's license and vehicle registration certificate; driving under the influence of alcohol is prohibited, as is driving while wearing slippers; smoking, eating, chatting, or engaging in any other behavior that may hinder safe driving is not allowed while operating a vehicle. Drivers must strictly adhere to these regulations to ensure safe driving. If a driver has a condition that affects safe driving or is excessively fatigued, they must not operate a motor vehicle. Generally, driving continuously for more than 4 hours or driving for more than 8 hours in total is considered fatigued driving, and sufficient rest is required before continuing to drive.
Was this review help?
19
2
Share
LeJack
08/13/25 8:13pm
As a seasoned driver who has taken the driving test multiple times, I want to emphasize that you should avoid wearing overly loose clothing like windbreakers or extra-wide-sleeved tops during the Subject 2 test. These can easily get caught on the steering wheel or tangled in the seatbelt, restricting your movement when turning and even posing a safety hazard. Never wear high heels or thick-soled shoes, as they make it difficult to press the pedals steadily, and you might stall during hill starts. I’ve seen people wearing sandals or flip-flops get stopped by the examiner for being unsafe. It’s best to wear well-fitted but stretchy pants and flat shoes, like sneakers. The test center also has rules against flashy or revealing outfits to avoid distractions or rule violations. Before the test, try simulating the test conditions at home in your car to ensure your outfit is comfortable and allows free movement. Remember, keeping your attire simple and practical helps you focus on the task, reduces the risk of mistakes, and increases your chances of passing on the first try.
Was this review help?
9
2
Share
Expand All
AddysonAnn
10/08/25 6:01am
I just finished my Subject 2 driving test and want to share some personal lessons. Wearing high heels or stilettos is absolutely not advisable - even after changing shoes, I still struggled with clutch control on the slope start and stalled the engine. Baggy hoodies are problematic too, as the hood kept getting caught in the seatbelt, nearly making me fall during gear changes. I recommend form-fitting but comfortable T-shirts with casual pants, paired with soft-soled sneakers for better pedal control and steering flexibility. Avoid excessive jewelry - jingling bracelets can be distracting. A friend got reminded by the examiner when her long skirt got caught while entering the car - pants are more practical. The key is choosing test-appropriate clothing in advance and doing trial movements to ensure full mobility and confidence.
Was this review help?
7
5
Share
Expand All
More Forum Discussions

How to Install and Use a Dash Cam?

The detailed installation steps for a dash cam are as follows: 1. Determine the optimal mounting position for the dash cam. It is recommended to install it on the right side of the interior rearview mirror, as centered as possible, to ensure a proper filming angle and higher reference value. 2. Plan the optimal wiring route based on the power cord length. 3. Tuck the power cord into the gap of the vehicle's headliner. 4. After routing the cord along the headliner, gently pull down the door seal trim. 5. Insert the cord into the door seal trim, align the A-pillar clips, and lightly tap the A-pillar trim panel into place with your fist. 6. Route the cord downward from the top of the A-pillar along the door frame, tucking it into the seal trim while reinstalling the seal, until reaching the bottom of the dashboard where the cord should emerge. 7. Pass the power cord behind the glove box. Depending on the vehicle model, secure the cord behind the glove box, or conceal it behind the firewall or under the floor mat. 8. Loosen the screws of the lower center console trim panel, create a small gap, insert the cord into the gap, and then tighten the screws. 9. Plug the power adapter into the cigarette lighter socket and verify that the dash cam powers on and functions normally.
18
1
Share

What is the N gear in automatic transmission vehicles?

Automatic transmission vehicles' N gear is the neutral gear. Below are specific introductions about automatic transmission: 1. Automatic transmission does not require the driver to manually shift gears; the vehicle will automatically select the appropriate gear based on the driving speed and traffic conditions. Generally, automatic transmission vehicles have six gear positions, from top to bottom: P, R, N, D, S, L. Cars with automatic transmissions (automatic gearboxes) can automatically change speed and torque according to road conditions, allowing the driver to focus entirely on the road traffic without being distracted by shifting gears. 2. The gears of automatic transmission cars are represented by the following letters: (1) P is the parking gear, P stands for "Parking," used when the car is parked or completely stationary. (2) R is the reverse gear; when using this gear, the car must be completely stationary before engaging. It is strictly prohibited to shift from a forward gear into reverse while the car is moving, as it can easily damage the transmission gears. (3) N is the neutral gear, used when the vehicle is temporarily stopped, such as waiting at a red light or traffic light. (4) D is the driving gear, the 2-speed medium gear, used when the speed is not high, such as in snowy conditions or urban areas. (5) L is the low-speed gear, used for climbing slopes or slippery roads (equivalent to the low-speed gear in manual transmission).
11
2
Share

What to Do If You Don't Have a Residence Permit for Vehicle Registration?

Some local police stations may issue a temporary certificate for obtaining a residence permit before the actual permit is issued. This certificate can be used for vehicle registration. Here are the relevant details: 1. According to Article 5 of the "Regulations on the Registration of Motor Vehicles": For the first-time application of a motor vehicle license plate and vehicle registration certificate, the owner of the motor vehicle shall apply for registration at the vehicle management office in their place of residence. 2. Article 7 lists the required documents for registration as follows: (1) Proof of identity of the motor vehicle owner. (2) Proof of the origin of the motor vehicle, such as the purchase invoice. (3) The motor vehicle's factory certificate of conformity or import documentation for imported vehicles. (4) Proof of payment of vehicle purchase tax or tax exemption certificate. (5) Proof of compulsory traffic accident liability insurance for the motor vehicle. (6) Proof of payment or tax exemption for vehicle and vessel tax. (7) Other proofs or certificates required by laws and administrative regulations during motor vehicle registration.
14
0
Share

How Often Should the Fuel System Be Cleaned?

Generally speaking, the fuel system of a car should be cleaned every 30,000 to 40,000 kilometers. Car owners can determine the cleaning interval based on their driving environment, road conditions, frequency of use, and local fuel quality. Reasons for cleaning the fuel system: 1. After the fuel system has been in operation for a period of time, carbon deposits and gum formed by combustion will adhere to the fuel injectors, causing them to stick or even become clogged. 2. Impurities and dust in the air and fuel can also lead to poor fuel flow or blockages, eventually forming carbon deposits and deposits on the fuel injectors. 3. If the fuel system is not cleaned for a long time, carbon deposits and deposits can clog the fuel injector needle valves and valve holes, affecting the performance of the precision components in the injection system, resulting in poor fuel injection, inadequate atomization, or even no injection. 4. This can lead to unstable idling, increased fuel consumption, poor acceleration, and difficulty starting the car.
8
1
Share

What Materials Are Used to Make Engine Oil?

Engine oil (also known as lubricating oil) is primarily divided into two types: mineral oil and synthetic oil. Mineral oil is refined from petroleum as the base oil and then mixed with additives. Synthetic oil's base oil is chemically synthesized before being blended with additives. The following are the functions of engine oil: 1. Lubrication: Engine oil forms a protective film on the surfaces of moving engine components, ensuring smoother relative motion between parts. 2. Cleaning: Relative motion between components causes continuous wear, especially during cold starts. Circulating oil carries away debris from wear, preventing further damage. 3. Anti-wear: It reduces friction coefficients and resistance, thereby saving energy. 4. Cooling: Continuously circulating through the engine's oil passages and oil pan, engine oil provides cooling effects similar to coolant. 5. Rust and corrosion prevention: The oil film isolates components from air and moisture, preventing rust. 6. Sealing and leak prevention: Engine oil forms a seal between piston rings and pistons, preventing leaks and contamination. 7. Shock absorption: By lubricating pistons, piston pins, connecting rods, and crankshaft bearings, it cushions impact loads.
10
0
Share

What switches and buttons are inside the car?

Vehicles require different lights to be turned on in various situations, mainly including low/high beams, fog lights, position lights, hazard warning flashers, and turn signals. Summer and winter temperatures can be extreme, so the air conditioning system helps improve comfort for both drivers and passengers. During normal driving, doors must be closed and locked; otherwise, they may open when turning or making U-turns. Window control buttons are typically located on each door, with the master control button positioned on the driver's left-side door.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.