What clothes are not allowed to wear for Subject 2 of the driving test?

What transmission does the Audi Q3 use?

The Audi Q3 is equipped with a 7-speed dual-clutch transmission. The dual-clutch transmission features two sets of clutches, with one controlling the even-numbered gears and the other managing the odd-numbered gears. Dual-clutch transmissions are categorized into dry-type and wet-type, with the primary difference being their cooling methods. The Audi Q3 is a model under FAW-Volkswagen Automotive Co., Ltd. In terms of power, the Audi Q3 utilizes a 2.0L four-cylinder turbocharged engine, delivering a maximum horsepower of 220ps and a peak power output of 162kw. Regarding body dimensions, the Audi Q3 measures 4385mm in length, 1831mm in width, and 1608mm in height, with a wheelbase of 2603mm.

6

1

Share

Does idling with the heater on damage the car?

Idling with the heater on will not damage the car if the engine has reached its normal operating temperature. However, if the engine has just started and hasn't yet reached its normal operating temperature, idling with the heater on will slow down the engine's warming process, leading to increased fuel consumption, but it won't cause any damage to the car. The heating principle of a car's air conditioning system is quite simple. When heating, the high-temperature coolant from the engine flows through the heater core, and the air blown by the blower also passes through the heater core, allowing warm air to be emitted from the air vents. The cooling principle of the car's air conditioning system is also relatively straightforward. When cooling, the clutch of the air conditioning compressor engages, and the engine drives the compressor to operate. The compressor continuously compresses the refrigerant and delivers it to the evaporator during operation.

20

4

Share

What are the differences between National 4 and National 5?

The differences between National 4 and National 5 are as follows: 1. Different meanings: The National 4 emission standard is the fourth stage of China's motor vehicle pollutant emission standards, while the National 5 emission standard is the fifth stage, known as the 'National 5 standard'. Compared to National 4, National 5 is more stringent, resulting in fewer pollutants emitted, making it more environmentally friendly. 2. Different standards: Compared to National 4, the new National 5 standard reduces nitrogen oxide emissions by 25% for light-duty vehicles and by 43% for heavy-duty vehicles. 3. Different symbols: The symbol for National 4 is IV, while the symbol for National 5 is V.

16

2

Share

What are the body dimensions of the Senova X25?

The body dimensions of the Senova X25 are 4110mm in length, 1750mm in width, and 1545mm in height, which align with the positioning standards of a compact SUV. In terms of power, the Senova X25 is equipped with a 1.5-liter naturally aspirated engine across all variants, delivering a maximum horsepower of 116. For transmission options, the Senova X25 offers a 5-speed manual and a 4-speed automatic. Regarding emission standards, the Senova X25 only meets the National IV vehicle emission standards. As for the suspension system, the front suspension is a MacPherson strut independent suspension, while the rear suspension is a torsion beam non-independent suspension.

6

0

Share

How to Determine Wheel Position?

Methods to determine wheel position: 1. To judge the left wheel position, observe the node of the left wiper in front of the driver's seat. When the node of the wiper coincides with the center line of the road, it means the wheel is already crossing the line and needs immediate adjustment; 2. To judge the right wheel position, observe the center point of the car's front. When the right lane dividing line coincides with the center point of the car's front, it indicates that the tire is crossing the line, and the steering wheel needs to be adjusted promptly; 3. When parking the vehicle alongside the road, replace the lane line with the roadside line. Avoid parking too close to the curb to prevent scratching the wheel hub and causing unnecessary damage. It's safer to observe the rear lane line through the rearview mirror or by leaning out to check.

10

1

Share

Do I need a four-wheel alignment when changing tires on a sedan?

Changing tires on a sedan does not require a four-wheel alignment. After replacing tires, wheel dynamic balancing is necessary, which is unrelated to four-wheel alignment. If the vehicle does not exhibit any deviation while driving and the steering wheel remains straight, alignment is not required. However, wheel dynamic balancing is essential; otherwise, vibration may occur during driving. Four-wheel alignment is based on the vehicle's four-wheel parameters, adjusted to ensure optimal driving performance and reliability. When experiencing issues such as heavy steering, shaking, deviation, misalignment, failure to return to center, or abnormal tire wear (including uneven wear, scalloped wear, block wear, or biased wear), or when the driver feels floating, bumping, or swaying sensations, it is advisable to check the wheel alignment values to determine if significant deviation exists and proceed with timely repairs.

1

5

Share

What clothes are not allowed to wear for Subject 2 of the driving test?

What transmission does the Audi Q3 use?

Does idling with the heater on damage the car?

What are the differences between National 4 and National 5?

What are the body dimensions of the Senova X25?

How to Determine Wheel Position?

Do I need a four-wheel alignment when changing tires on a sedan?

How to Remove Adhesive from a Car Without Damaging the Paint?

Is Highway Travel Free for Cars During the Mid-Autumn Festival?

Should You Keep the Gas Pedal Pressed or Alternate Between Pressing and Releasing While Driving?

What is Brake Tapping?