What class of car is the Fista?

What does EBD mean and what are its functions?

EBD stands for Electronic Brakeforce Distribution. Its function is to quickly calculate the varying friction values of the four tires due to different adhesion during vehicle braking, adjust the braking system to make high-speed adjustments according to the set program during movement, achieve the matching of braking force and friction, and ensure the stability and safety of the vehicle. Essentially, EBD can be considered an auxiliary function of ABS. Below is related information: 1. Function: Vehicles equipped with the EBD system will automatically detect the adhesion condition between each wheel and the ground, and appropriately distribute the force generated by the braking system to the four wheels. 2. Enhanced braking force: With the assistance of the EBD system, braking force can achieve optimal efficiency, significantly shortening the braking distance while maintaining vehicle stability during braking, thereby improving driving safety. Additionally, the EBD system also has the function of maintaining vehicle stability when braking in curves, enhancing safety during curve driving.

12

3

Share

What Causes Front Wheel Noise When Starting to Turn?

Depending on the vehicle model and design, there are several possible reasons for front wheel noise when starting to turn: 1. Faulty half-shaft or CV joint components; 2. Suspension component failure, such as lack of lubrication, wear, or deformation; 3. Steering mechanism component failure, including tie rods, upper/lower control arms, ball joints, etc.; 4. Front/rear wheel bearing failure due to wear, lack of lubrication, or burnout; 5. Tire deformation or irregular wear caused by wear or quality defects; 6. Front/rear axle (differential) issues from lack of lubrication, component damage, or quality defects; 7. Poor engagement between half-shaft splines and differential internal keys, or spline wear/missing; 8. Shock absorber problems; 9. Issues with thrust bearings (or top mounts).

10

5

Share

Can Sidewall Tire Damage Be Repaired?

Tire sidewall damage can be repaired depending on the actual situation, and each case needs to be judged individually. If the carcass layer is not damaged, it can be repaired without increasing the risk of a blowout. However, if more than three cords in the tire sidewall carcass are broken, repair is not recommended as it may affect driving safety. Below is relevant information about car tires: 1. Structure: Modern car tires are mostly radial tires, primarily composed of a carcass layer and rubber. The carcass layer consists of crosswise and lengthwise cord layers (some may include steel wire mesh), mainly serving a load-bearing function, while the rubber provides sealing and flexible deformation. 2. Repair Principle: If the tire carcass layer is damaged, it directly affects the tire's strength—the more cords that are broken, the higher the risk of a blowout. Similarly, if the inner cords of the tire are not severed, the tire can still be used normally after restoring airtightness.

6

5

Share

How Long Does Waxing Stay Clean?

Generally, for vehicles parked in garages and mostly driven on good roads, waxing every 3-4 months is recommended; for vehicles parked outdoors exposed to wind and rain, it's best to wax every 2-3 months. Of course, this is not a strict rule. Generally, when the body feels rough to the touch, it's time to wax again. Here is additional information: The functions of waxing: Waterproofing and protection against acid rain. Due to the protection of car wax, the amount of water droplets adhering to the car body is significantly reduced, with the effect of car waxing being very noticeable, reaching 50% to 90%. Secondly, it protects against high temperatures and UV rays. As the weather gets hotter, cars driven or stored outdoors year-round are prone to paint aging and fading due to sunlight. The film formed by waxing can reflect some of the light, effectively preventing paint aging.

6

0

Share

Is It Normal for the Electronic Parking Brake to Make Loud Noises When Engaging and Disengaging?

When the electronic parking brake is engaged or released, there will be a motor operating sound. This noise is produced by the motor controlling the rear wheel brake calipers or the tensioner, which is a normal occurrence and does not require excessive concern. However, if other abnormal noises occur, it is necessary to promptly send the car for inspection to ensure driving safety. The advantages of the electronic parking brake are as follows: 1. Simple operation: The biggest advantage of the electronic parking brake is its simplicity—just flick a switch to activate the parking brake function. Additionally, the settings of the electronic parking brake are more user-friendly, as it can be engaged under any circumstances. 2. High safety factor: If accidentally pressed while driving, the electronic parking brake will not activate as long as the throttle is still in the working position. If pressed during emergency braking, the electronic parking brake will not lock the wheels but will provide stronger braking force to assist in stopping.

16

3

Share

How Many Times Can a Clutch Plate Burn Out?

Occasional burning of the clutch plate is not a major issue, especially if it happens briefly, as surface wear may not necessitate replacement. However, if the clutch is held in a semi-engaged state for prolonged periods at high engine speeds, the wear increases significantly. This leads to a strong burning smell due to rising temperatures, accompanied by symptoms like shaking, slipping, and unusual noises, indicating the need for replacement. Signs of a burnt-out clutch include: 1. Reduced Power: The engine's power output is transmitted to the transmission via the clutch. A burnt clutch causes the plate to slip, resulting in decreased power. 2. Metallic Grinding Noise: The friction surface of the clutch plate is secured with rivets. Burning the clutch wears down this surface, exposing the rivets to contact with the flywheel, creating a metallic grinding noise when engaging or disengaging the clutch. 3. Gear Shift Jerkiness: The clutch plate contacts the flywheel. When burnt, exposed rivets cause a strong jerking sensation during gear shifts.

1

0

Share

What class of car is the Fista?

What does EBD mean and what are its functions?

What Causes Front Wheel Noise When Starting to Turn?

Can Sidewall Tire Damage Be Repaired?

How Long Does Waxing Stay Clean?

Is It Normal for the Electronic Parking Brake to Make Loud Noises When Engaging and Disengaging?

How Many Times Can a Clutch Plate Burn Out?

What is Subject 4 Actually Called?

Where is the Green Book for Used Car Loans Stored?

Will Insurance Companies Compensate for Flooded Vehicles?

Can an out-of-town vehicle be registered locally?