What checks should be performed on the vehicle before driving?

1 Answers
VonArcher
07/29/25 4:49pm
Engine SCR warning light illumination indicates a malfunction in the corresponding component's function. Common causes: Insufficient urea level, nitrogen oxide sensor failure, urea injector malfunction, urea injector clogging, or urea pump failure. Engines include internal combustion engines (reciprocating piston engines), external combustion engines (Stirling engines, steam engines, etc.), jet engines, and electric motors. Professional equipment required for diagnosis: For such faults, professional diagnostic equipment is generally required. It is recommended to refer to the maintenance checklist in the engine service manual and visit the nearest service station for inspection and repair. Free repairs are provided during the warranty period.
Was this review help?
18
3
Share
More Forum Discussions

What does ON mean on an air switch?

ON on an air switch indicates connection, while OFF indicates disconnection. The air switch is a crucial electrical device in low-voltage distribution networks and power drive systems, integrating control and multiple protection functions. In addition to completing circuit connection and disconnection, it can also protect against short circuits, severe overloads, and under-voltage in circuits or electrical equipment. It can also be used for infrequent motor starting. Below is an introduction to the air switch: 1. Working principle: When a general overload occurs in the circuit, the overload current may not trigger the electromagnetic release, but it can generate heat in the thermal element, causing the bimetallic strip to bend upward due to heat. This pushes the lever to disengage the hook from the latch, separating the main contacts and cutting off the power. In the event of a short circuit or severe overload current, the short-circuit current exceeds the instantaneous trip setting value, and the electromagnetic release generates sufficient force to attract the armature and strike the lever. This causes the hook to rotate upward around the pivot seat and disengage from the latch. Under the action of the reaction spring, the latch separates the three main contacts, cutting off the power. 2. Main functions: Under normal conditions, the armature of the overcurrent release is released. In the event of a severe overload or short circuit, the coil connected in series with the main circuit generates a strong electromagnetic force to pull the armature downward and push the latch hook open, disconnecting the main contacts. The under-voltage release works in the opposite way. Under normal voltage, the electromagnetic force holds the armature, allowing the main contacts to close. If the voltage drops severely or is cut off, the armature is released, and the main contacts open. When the power voltage returns to normal, the switch must be reclosed to resume operation, achieving under-voltage protection.
19
2
Share

Under What Circumstances Should Emergency Braking Be Applied?

When a vehicle is driving normally without adaptive cruise control, it can autonomously generate braking effects to decelerate the vehicle in case of sudden hazards. Below is an introduction to emergency braking: 1. Overview: The Autonomous Emergency Braking System (AEB) is a crucial active safety technology. When the system detects a potential collision hazard ahead of the vehicle, it alerts the driver through auditory and visual signals, prompting them to take evasive action. If the driver fails to respond appropriately to the warning signals in time and the collision risk becomes imminent, the system automatically applies the brakes to avoid or mitigate the collision. 2. Definition: Emergency braking refers to the driver's swift and correct use of the brake pedal in an emergency situation while the vehicle is in motion, bringing the vehicle to a stop in the shortest possible distance. For vehicles equipped with an Anti-lock Braking System (ABS), the correct procedure is: quickly release the accelerator pedal, immediately and firmly press the brake pedal (maintaining full pressure), and simultaneously depress the clutch pedal to bring the vehicle to a rapid halt.
2
0
Share

What Are the Advantages of Car Window Tinting?

Car window tinting offers benefits such as heat insulation, UV protection, and preventing window glass shattering. The specific advantages are as follows: 1. Heat Insulation: The majority of sunlight consists of infrared rays, which are the primary source of heat. While some types of car window films, like crystal films, are ineffective at blocking infrared and ultraviolet rays, most car window films can block infrared rays, reducing heat and creating a comfortable driving environment. High-quality heat-insulating window films help cool the car interior more efficiently, reduce vehicle energy consumption, and achieve fuel savings. 2. UV Protection: Ultraviolet rays can cause significant harm to both people and vehicles. Window films with UV400 protection can shield against UV rays and block glare, effectively protecting the driver's eyes. Premium car films also feature an anti-corrosive metal oxide layer that effectively blocks heat and harsh glare from sunlight, safeguarding the car's interior and the driver from harmful UV exposure. 3. Preventing Glass Shattering: In the event of a collision, shattered window glass can easily scatter. This feature of window tinting helps minimize the risk of injury from flying glass fragments when the window breaks.
12
2
Share

What kind of driver's license is required for a GMC yellow-plate vehicle?

An A1 driver's license is required to drive it. For blue-plate vehicles under 6 meters, a C1 driver's license or a higher-level license is needed; for GMC vehicles over 6 meters with yellow plates, an A1 driver's license is required. The A1 (large passenger vehicle) license permits driving: large passenger vehicles. Other permitted vehicle types: A3, B1, B2, C1, C2, C3, C4, M. Below is additional information about GMC: 1. GMC is the commercial vehicle division under the General Motors Group. Current models include the Envoy, Canyon, Sierra, Yukon, Safari, Savana, and more. 2. General Motors Corporation is the world's largest automobile company, with an annual industrial output value exceeding $100 billion. Its logo, GM, is derived from the first letters of the first two words of its English name (General Motors Corporation). 3. The GMC mid-size pickup is called the Canyon, which is essentially the same as the Chevrolet Colorado except for the unique radiator grille. Similarly, the full-size pickup Sierra is a clone model of the Chevrolet Silverado.
2
1
Share

What is the function of automatic window closing when locking the car?

This is the automatic window lifting function, which works in conjunction with the car's central control system, and can also be referred to as the one-touch lock function. Below is an introduction to car windows: 1. Types: Car windows are generally divided into four types: front and rear windshields, ventilation windows, heat-insulating side windows, and sunroofs. The front and rear windows of a car usually use curved glass that is both aesthetically pleasing and provides good visibility, embedded in the window frame with rubber sealing strips or adhered with special adhesives. To facilitate natural ventilation, the side windows of a car can usually be moved up and down or back and forth. 2. Window materials: As early as 80 years ago, glass was installed on the front end of the Ford Model T, using flat glass to protect the driver from wind and rain. In the decades that followed, the glass industry gradually became involved in the automotive industry, creating various types of safety glass—laminated glass, tempered glass, and zone-tempered glass—greatly improving the performance of automotive glass.
14
5
Share

Where is the transmission fluid filler port for the Buick Excelle?

The transmission fluid filler port for the Buick Excelle is located at the position of the right transmission half-shaft. You can loosen the screw labeled number 14 to fill the transmission fluid. Here is some relevant information about the Buick Excelle's transmission: 1. Regular Replacement: The transmission fluid of the Buick Excelle needs to be replaced regularly. The transmission relies on transmission fluid for cooling, lubrication, and hydraulic power transfer. If the transmission fluid is used for too long, it will reduce the performance of the transmission. Severely contaminated transmission fluid can also lead to a series of transmission issues. 2. Transmission Size: Taking the Buick Excelle 2020 15N CVT Luxury National VI as an example: It is a compact 4-door, 5-seater sedan with a top speed of 170 km/h, equipped with a CVT continuously variable transmission. The Buick Excelle 2020 15N CVT Luxury National VI has a length, width, and height of 4468mm, 1765mm, and 1469mm respectively, a wheelbase of 2611mm, and a fuel tank capacity of 40L.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.