What Certifications Are Required for Auto Repair?

What are the identification standards for assembled vehicles?

The identification standards for assembled vehicles include unauthorized use of imported key components, etc. The specific identification standards are as follows: Not listed in the national motor vehicle production catalog: Enterprises not listed in the national motor vehicle production catalog use imported key components to assemble and produce cars and motorcycles. Unauthorized: Enterprises listed in the national catalog use imported key components to assemble and produce cars and motorcycles without approval. Unable to provide proof: Enterprises approved by the state for the project cannot provide the import quota certificate issued by the economic and trade department, the import certificate for mechanical and electrical products, the import license issued by the licensing authority, the tariff payment certificate issued by the customs, and the goods import certificate. Motor vehicle production enterprises use imported key assemblies approved by the state to produce cars and motorcycles, and the total value of the assemblies and non-key components used exceeds 60% of the original imported model; and there is no whole vehicle import certificate or whole vehicle duty-paid certificate.

15

3

Share

Must the clutch be fully depressed when shifting gears?

Shifting gears does not necessarily require the clutch to be fully depressed. Relevant information about the clutch and gear shifting is as follows: Correct use of the clutch and gear shifting during braking: While driving, except for low-speed braking to stop, which requires depressing the clutch pedal, it is generally advisable to avoid depressing the clutch pedal in other braking situations. The correct method for low-speed braking to stop is to first depress the brake pedal and then the clutch pedal to bring the car to a smooth halt. Precautions for clutch operation when shifting gears: Whether starting or shifting gears while driving, the clutch should be depressed. Unless the engine speed and driving speed are well matched, it is possible to shift gears without depressing the clutch. To summarize, the operation can be described in three words: "fast, pause, slow." "Fast" means quickly lifting the clutch to the point where the engine delivers power; "pause" means holding at the engagement point for one or two seconds; "slow" means gradually releasing the clutch completely after the vehicle starts moving.

8

2

Share

Which wire to cut to start a motorcycle?

Alternate ignition with two wires. Below is the specific introduction of relevant content: Wiring ignition: The method to start a motorcycle without a key is to connect the red wire and black wire together to start. Locate the wires of the ignition device, one red and one black, where red is positive and black is negative. Touch the two wire ends together to start the motorcycle. Ignition system: Consists of the ignition coil, CDI igniter, high-voltage coil, spark plug, etc. The primary electricity emitted by the motorcycle's ignition coil enters the igniter, then the current passes through the igniter into the high-voltage coil. The high-intensity current from the high-voltage coil enters the spark plug to ignite and burn the gasoline in the cylinder, pushing the crankshaft to work under high explosive pressure.

5

1

Share

Is a motorcycle inspected once a year?

Motorcycles must undergo inspection once every 2 years within the first 4 years after purchase, and once every year after exceeding 4 years. Relevant information about motorcycle inspections is as follows: Legal basis: According to Article 16 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China": Motor vehicles shall undergo safety technical inspections according to the following periods from the date of registration: Motorcycles must be inspected once every 2 years within the first 4 years; and once every year after exceeding 4 years. Inspection items: Compulsory traffic insurance (CTPL). One of the preparations for the annual vehicle inspection is to check the validity date of the CTPL, which includes the vehicle and vessel tax. If the insurance has expired or will expire within three months after the inspection date, it is recommended to renew it in advance to avoid delaying the inspection. Generally, when purchasing new commercial insurance for the year, insurance companies will also provide quotes for the CTPL and vehicle and vessel tax, and they will handle the purchase on behalf of the owner.

4

Share

How long after passing the motorcycle test part three can you take part four?

After passing the motorcycle test part three, you need to wait one week before taking part four. The following are some important points to note for part four: Master problem-solving techniques: Similar to part one, part four also has a large number of practice questions. Simply memorizing by rote often leads to a vicious cycle of remembering and forgetting, ultimately consuming a lot of time and effort without corresponding results. There are various ways to practice, combined with answering techniques, to help you easily remember key points. Schedule regular mock exams: Mock exams have been revised and improved multiple times, making them highly similar to the actual test questions. Therefore, once you have a good grasp of the knowledge, taking a mock exam every day to get into the exam mindset in advance can be highly effective.

12

5

Share

Can a motorcycle downshift continuously?

Motorcycles can downshift continuously. The methods and techniques for continuous downshifting are as follows: Continuous Downshifting Operation Method: This involves pulling the clutch and downshifting several gears in a row. However, this operation must be performed during rapid deceleration, i.e., when quickly reducing speed from a higher to a lower speed. The gears downshifted must match the speed after deceleration. It is not possible to continuously downshift to low gears at high speeds, or if you do downshift, you cannot release the clutch, otherwise it will severely strain the engine and may even cause engine damage or loss of control leading to a crash. Shifting Techniques: When dealing with complex road conditions, motorcycle riding requires extra attention. It is advisable to downshift in advance to adapt to changing road conditions. Early downshifting has several benefits: it helps strengthen braking after deceleration, handles complex road surfaces better, provides stronger low-gear passing ability, and enhances safety. From the perspective of vehicle performance and operational requirements, starting in 1st gear, then moving to 2nd, 3rd, and 4th gears progressively is the correct approach. It is best not to start in high gears as this can cause significant harm and wear to the transmission gears and clutch, is prone to stalling, and is less safe. It is good practice to develop the habit of starting in neutral, moving to 1st gear, and progressing step by step through the gears.

14

3

Share

What Certifications Are Required for Auto Repair?

What are the identification standards for assembled vehicles?

Must the clutch be fully depressed when shifting gears?

Which wire to cut to start a motorcycle?

Is a motorcycle inspected once a year?

How long after passing the motorcycle test part three can you take part four?

Can a motorcycle downshift continuously?

What Do You Need to Open a Car Detailing Shop?

Will forgetting to turn on the headlights be captured by electronic surveillance?

Can I change from C2 to C1 after registration?

Can a B2 license holder drive a tractor head without a trailer?