What Certificates Does a Crane Operator Need?

1 Answers
LeCalvin
07/29/25 4:00pm
Special Operation Certificate, and crane operators also need to have a B2 or higher-level driver's license. Vehicle Types Permitted by B2 License: Heavy-duty and medium-duty trucks or large, heavy, and medium-sized special-purpose vehicles. Heavy-duty and medium-duty trucks are mainly trucks, such as the large trucks commonly seen on the road carrying construction waste, which belong to heavy-duty trucks. Large, heavy, and medium-sized special-purpose vehicles refer to vehicles equipped with special equipment or tools, such as water sprinklers, concrete mixers, fire trucks, etc. Other permitted vehicle types include C1 (small cars), C2 (small automatic transmission cars), C3 (low-speed trucks), C4 (three-wheeled cars), and M (wheeled self-propelled machinery), which are the same as those permitted by a B1 license. B2 Driver's License Application Requirements: Applicants must be between 21 and 50 years old; height must be at least 155 cm; both eyes must have a naked vision of at least 5.0; must be able to distinguish the direction of sound from a tuning fork at 50 cm with each ear to ensure correct judgment during actual driving; B2 driver's license can only be obtained within the prefecture-level city of the applicant's household registration and cannot be applied for with a temporary residence permit.
Was this review help?
2
4
Share
More Forum Discussions

How to Use a Paint Thickness Gauge?

Paint thickness gauge usage method: 1. Before measurement, remove any attached substances on the surface, but do not remove any coating material; 2. Do not measure near abrupt changes in the test piece, such as edges, holes, and inner corners, and do not measure on curved surfaces of the test piece; 3. Since each reading of the instrument is not exactly the same, it is necessary to take several readings within each measurement area; 4. Local variations in coating thickness also require multiple measurements in any given area, especially when the surface is rough. The probe located on the surface of the component generates a closed magnetic circuit. As the distance between the probe and the ferromagnetic material changes, this magnetic circuit will change to varying degrees, causing changes in magnetic resistance and the inductance of the probe coil. Using this principle, the distance between the probe and the ferromagnetic material, i.e., the coating thickness, can be accurately measured.
17
5
Share

How Does a Non-Plug-In Hybrid Vehicle Work?

Non-plug-in hybrid vehicle working principle: The vehicle is driven by both an internal combustion engine and an electric motor. At low speeds, the electric motor powers the car using electricity from the battery. At high speeds, both the internal combustion engine and the electric motor work together to provide power. The battery's electricity comes from a generator driven by the internal combustion engine. When the car brakes or decelerates downhill, the generator acts as a resistance to recover the vehicle's kinetic energy and converts it into electrical energy stored in the battery. The commonly referred to hybrid generally means a gasoline-electric hybrid, which is a combination of fuel and electric power. Hybrid vehicles use an electric motor as an auxiliary power source to assist the engine. Moreover, the electric motor assisting the engine can generate strong and smooth power during normal driving, allowing the owner to enjoy more powerful starts and acceleration.
8
0
Share

How to Use Auto Start-Stop?

Auto start-stop usage method: Taking an automatic transmission car as an example, as long as the car is started, the auto start-stop system is in normal working condition. When encountering a traffic light or stopping for other reasons while driving, press the brake pedal, and generally after two seconds the engine will automatically shut off. When ready to start again, simply release the brake and press the accelerator, or gently turn the steering wheel, at which point the engine will restart. If the car has a manual transmission, unless turned off, the auto start-stop system is also enabled by default. When parking, shift to neutral, then pull the handbrake and release the clutch. After the system detects these three actions, it will automatically shut off the engine. When the clutch is pressed again, the engine will automatically restart.
11
3
Share

How to Turn on Bluetooth in Passat?

Passat Bluetooth activation method: 1. Establish a pairing relationship between the mobile phone and the car's Bluetooth device. Turn on the Bluetooth function of both the mobile phone and the car's Bluetooth device, and set the mobile phone Bluetooth to 'visible to all' in the settings; 2. Search for Bluetooth devices on the mobile phone, select the found device for pairing and connection. Once paired, the connection is successful. After successful pairing between the car's Bluetooth and the mobile phone Bluetooth, functions such as making and receiving calls, and listening to music can be achieved. The Passat is a front-wheel-drive sedan powered by a water-cooled engine, with dimensions of 4870 mm in length, 1834 mm in width, and 1472 mm in height, and a wheelbase of 2803 mm. The Passat's drive type is front-engine, front-wheel-drive, with a front suspension type of MacPherson independent suspension and a rear suspension of multi-link independent suspension.
5
3
Share

What engine does the Lynk & Co 01 have?

The Lynk & Co 01 is equipped with a 2.0T turbocharged inline four-cylinder engine sourced from Volvo. This engine delivers a maximum power of 190 horsepower (140 kW) at 4,700 rpm, and a peak torque of 300 N·m available between 1,400 to 4,000 rpm. The Lynk & Co 01 features comprehensive NVH luxury configurations that prevent noise and vibration at the source, block noise transmission pathways, and optimize sound quality for purer tones and stable frequencies. In terms of safety features, the Lynk & Co 01 comes with 17 intelligent driving assistance technologies including ACC adaptive cruise control, AEB automatic emergency braking, panoramic imaging, rear cross-traffic alert, blind spot monitoring system, and active high/low beam adjustment. These systems provide protection whether driving forward, changing lanes, or parking, helping to mitigate driving risks while effectively reducing driver fatigue.
16
2
Share

Which country does Dodge belong to?

Dodge is an American car brand, one of the automobile brands under the Chrysler Group. Globally, its product portfolio includes a series of cars, trucks, light commercial vehicles, and sport utility vehicles. Main models include the Dodge Caliber, Dodge Viper, Dodge Magnum, Dodge Ram, Dodge Journey, Dodge Caravan, and Dodge Charger. The Dodge Journey is a mid-size SUV with dimensions of 4910 mm in length, 1878 mm in width, and 1751 mm in height, and a wheelbase of 2890 mm. The Dodge Journey offers two displacement options with three models for consumers to choose from: the 2.4L Smart Edition, 2.4L Premium Edition, and 3.6L Four-Wheel Drive Flagship Edition. In terms of power, the 2.4L displacement model of the Dodge Journey has a maximum power of 170 horsepower and a maximum torque of 220 Nm, while the 3.6L displacement model has a maximum power of 280 horsepower and a maximum torque of 342 Nm. All three models are equipped with a 6-speed automatic transmission.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.