What Causes Yellow Spots on White Cars?

1 Answers
DeMakayla
07/30/25 12:43am
White cars with yellow spots are caused by rust. Yellow spots on car paint are commonly seen on white and silver vehicles. These yellow spots typically form when iron particles land on the paint surface and rust due to rainwater, creating yellow rust spots. Here are the main removal methods: 1. Prepare an iron remover spray and apply it to the affected areas on the car body. Let it soak for 4-6 minutes, then rinse thoroughly with water. If necessary, use a cleaning solution, but ensure no iron remover residue remains on the car body. 2. Visit a 4S shop for polishing, waxing, and crystal coating treatment. Always polish and wax before applying crystal coating, otherwise it may not be effective.
Was this review help?
15
1
Share
More Forum Discussions

What is the original brand of the Wrangler battery?

The original battery for the Wrangler is the VARTA battery. VARTA is the most renowned European automotive battery brand under Clarios, established in Hagen, Germany, in 1887. In 2002, its AG automotive battery division was acquired by Johnson Controls. Below are detailed insights about VARTA: 1. VARTA takes on the role of an environmental leader with a strong sense of corporate responsibility in environmental protection and sustainable development. While focusing on product innovation, it also prioritizes environmental conservation. All products utilize advanced battery technology and eco-friendly internal components, maximizing automotive fuel efficiency, reducing energy consumption and pollution, and improving resource utilization. 2. In addition to its efforts in environmental management, including waste reduction and other production practices, VARTA continuously overcomes technical challenges, enhances equipment performance, and improves supply chain sustainability to utilize natural resources more efficiently, lower energy consumption, reduce pollution, and contribute to a shared low-carbon planet. VARTA employs world-class technology globally, setting industry benchmarks in health, safety, and environmental benefits through eco-friendly measures in both production and recycling processes.
16
5
Share

Can Subject 2 and Subject 3 be Scheduled Together?

The new driving test regulations have introduced revised provisions for scheduling Subject 2 and Subject 3 exams. A policy allowing one-time simultaneous scheduling for both subjects has been implemented, meaning candidates can proceed directly to Subject 3 preparation after completing Subject 2 without waiting. Additional Information: 1. Important Notes: If the vehicle management office cannot arrange exams within 60 days for applicants scheduling Subject 2 or Subject 3 road driving skill tests, they may choose to schedule at other test centers within the same province (autonomous region/municipality). 2. Scheduling Methods: More diverse scheduling options are available, including self-registration. The vehicle management office has established a nationwide unified exam scheduling platform offering multiple registration channels such as online, telephone, and counter services. After completing training, candidates can independently select exam times and venues in accordance with regulations. The public security authorities will fairly arrange exams based on registration or scheduling order.
1
5
Share

Why is the air conditioner not blowing hot air?

Car air conditioning heating system not producing heat can be attributed to two main reasons: one is caused by abnormalities in the engine cooling system, and the other is due to poor operation of the heating control mechanism. Below is relevant information regarding these two aspects: Possible issues with the cooling system: 1. The thermostat is constantly open or opens too early, causing the cooling system to prematurely enter a large circulation cycle. With low external temperatures, the cold air quickly cools the antifreeze, resulting in low engine water temperature and insufficient heating. 2. Damage or slippage of the water pump impeller reduces the flow rate through the small heating radiator, leading to insufficient heat. 3. Air pockets in the engine cooling system hinder proper circulation, causing high water temperature and inadequate heating. If air pockets persist in the cooling system, it may indicate a damaged cylinder head gasket allowing air into the cooling system. If the inlet pipe of the small heating radiator is hot while the outlet pipe is cold, this suggests a blockage in the small heating radiator, which should be replaced. Issues with the airflow control mechanism: 1. The car's heating system uses a blower to direct heat from the small heating radiator into the cabin. If the airflow is insufficient or the distribution between hot and cold air is poor, the heat from the small heating radiator cannot be effectively dispersed, resulting in low heating temperature. In this case, first check if the air filter is dirty or clogged, clean it, and replace it if necessary. 2. Inspect the operation of the blower at each speed setting to ensure sufficient rotation speed at every level. If the knob is adjusted to the heating position, the airflow is strong, and the direction is normal, but cold air is still blowing, check if the control cable for the heating box's hot/cold air flap is detached, if the heating impeller is damaged, or if the flap is dislodged. After troubleshooting these issues, the heating should function properly.
8
0
Share

Why Can't BMW Achieve Full Power Transmission?

1. What is the Transmission System: The transmission system generally consists of components such as the clutch, gearbox, universal transmission device, main reducer, differential, and half-shaft. Its basic function is to transmit the power generated by the engine to the driving wheels of the car, producing driving force to enable the car to travel at a certain speed. 2. Understanding "Transmission System Fault": According to the above explanation, a transmission system fault should refer to failures in components like the clutch, gearbox, universal transmission device, main reducer, differential, and half-shaft. However, in reality, apart from these component failures being classified as transmission system faults, many unrelated issues—such as fuel pump, fuel injector, solenoid valve, sensor malfunctions, or even a damaged screw—can trigger a "transmission system fault" warning. 3. Summary of Reasons Why BMW Displays "Transmission System Fault": 1. The onboard computer cannot respond in time, causing the program to malfunction; 2. Fuel pump damage or fuel pump sensor failure; 3. Fuel injector damage; 4. Ignition coil failure; 5. Spark plug damage or carbon buildup; 6. Turbocharger wastegate damage, which may not be the wastegate itself but a clogged internal filter; 7. Incorrect vacuum tube connection on the turbocharger wastegate; 8. Relay burnout in the fuse box on the right side of the rear trunk; 9. VANOS solenoid valve damage; 10. Loose or damaged camshaft position sensor screw.
9
0
Share

What is the actual range of BYD Qin?

The range of BYD Qin varies depending on the model. The high-range luxury version and high-range premium version have a range of 421km, while the travel standard version and travel version offer a range of 400km. The above data represents the range when fully charged, as officially published under NEDC standards. BYD Qin is a high-performance sedan independently developed by BYD Co., Ltd. as part of its second-generation DM series. It measures 4675mm in length, 1770mm in width, and 1500mm in height, with a wheelbase of 2670mm. The range is directly related to the three key electric systems of an electric vehicle: battery, electric drive, and electric control. Battery system: The capacity of the power battery directly determines the range. Additionally, excessively high or low temperatures of the battery system can also affect the range. With the same battery capacity, more stable battery temperatures ensure better range performance. Electric drive system: This mainly includes the drive motor, controller, inverter, and reducer. Its efficiency is determined by the ratio of input power to output power. When the battery capacity is fixed, under the same voltage, the output energy is determined by the efficiency of the drive system. Automakers strive to optimize motor and control efficiency to reduce energy consumption and improve range. Vehicle control system: This primarily coordinates the relationship between the battery, drive system, and brake energy recovery of the chassis. In scenarios involving frequent acceleration and deceleration, the proportion of energy recovery (brake energy recovery) can be dynamically adjusted based on the battery's state and braking demands, thereby enhancing energy utilization efficiency. In addition, the brake energy recovery strategy of electric vehicles can directly increase the vehicle's driving range.
3
5
Share

How much longer can a yellow-plated China III vehicle be driven?

Generally, China III vehicles can be driven indefinitely as there are no mandatory scrappage measures imposed by the state. However, this depends on the traffic restrictions in the specific region. According to policy regulations, vehicles will only be guided for scrappage after reaching 600,000 kilometers. The key factor determining whether a vehicle can be on the road is whether it can pass the annual inspection. Without this unwritten rule, China III vehicles could theoretically still be driven for 48 years. Additional information is as follows: 1. Yellow plates: Yellow plates are for large vehicles; two-wheeled and three-wheeled motorcycles; large buses; and vehicles used for agricultural purposes. 2. China VI standard: The China VI vehicle emission standards refer to the standards established to implement the 'Environmental Protection Law of the People's Republic of China' and the 'Air Pollution Prevention and Control Law of the People's Republic of China,' aiming to prevent pollution from the exhaust of compression-ignition and gas-fueled ignition engine vehicles, protect the ecological environment, and safeguard human health. These standards include two parts: 'Limits and Measurement Methods for Emissions from Light-duty Vehicles (China VI)' and 'Limits and Measurement Methods for Emissions from Heavy-duty Diesel Vehicles (China VI).'
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.