···
Log in / Register

What Causes Wiper Blades to Shake and Make Noise?

4 Answers
DeJanelle
09/04/25 6:16am

Wiper blades shaking and making noise may be caused by an increased friction coefficient between the wiper and the glass surface, or it could be due to a malfunction in the wiper motor. Additional details are as follows: 1. Introduction: The wiper is an important accessory installed on the windshield, designed to remove rain, snow, and dust that obstruct visibility. Therefore, it plays a crucial role in driving safety. 2. Principle: The motor on an electric wiper drives the output shaft through a worm gear on the armature shaft and then drives the output gear via an idler and idler shaft. The output arm connected to the wiper linkage is then operated by the output shaft. When the motor rotates, the output arm and linkage are driven to move back and forth.

Was this review help?
3
1
Share
McKeegan
09/16/25 7:13am

Last time it rained, my wipers made clicking noises and shook violently. An experienced driver told me it was mainly due to aged wiper blades—the hardened rubber had many cracks, causing uneven friction and making them skip around with squeaky sounds. If there’s oil film or insect residue on the windshield, the wipers can stick and wobble when sliding over, which is especially annoying. Installation issues are also common; if the wiper arm angle isn’t adjusted properly, uneven pressure can cause strange noises. I make it a habit to replace wiper blades every six months and always use glass degreaser when washing the car to clean the surface—don’t wait until heavy rain blurs your vision to regret it. Once, the wiper linkage was loose, causing huge vibrations, so I rushed to the repair shop to fix it. Safe driving is no joke.

Was this review help?
13
4
Share
Expand All
Minnie
10/30/25 7:48am

Wiper blade juddering and noise are mostly caused by worn wiper blades or dirty windshield. As a DIY-savvy car owner, I regularly remove the wipers to inspect the rubber strips—replace them if there are cracks or signs of hardening. Nowadays, silicone materials are more durable and anti-judder. Oil film on the windshield should be wiped off with wiper cleaning fluid; otherwise, uneven friction can cause the wipers to jump and make noise. Aging wiper arm springs can also lead to insufficient pressure. I've tried manually adjusting the angle or spraying lubricant to reduce vibration. Replacing wiper blades is simple—buy the matching model online and install them properly following tutorials. Motor issues are rare but require professional tools to inspect the linkage. Don't delay repairs, as it can damage the windshield and compromise driving safety in rainy conditions.

Was this review help?
15
4
Share
Expand All
Isabelle
12/13/25 7:56am

The wiper judder always annoys me. Common causes include worn-out wiper blades, where hardened rubber fails to clean properly and creates buzzing noises. Dirt or scratches on the windshield can also hinder wiper movement, causing judder. I recently learned to use white vinegar while washing the car to remove oil film and reduce noise. If improperly installed, adjust the wiper arm position. It's better to replace wipers more frequently—once a year—to prevent poor visibility during rain and avoid accidents. Simple maintenance ensures worry-free driving.

Was this review help?
17
0
Share
Expand All
More Forum Discussions

Where is the heating switch valve of Dongfeng truck?

Dongfeng truck heating switch valve is located on the central control panel of the dashboard. When turning it on, note that it opens clockwise and closes counterclockwise, and the rotation must be fully completed when switching. Precautions for turning on the heating are as follows: Do not drain water from the system: The position of the radiator should not be altered arbitrarily, and water should not be drained from the system. Without hot water, the heating will become ineffective, making it as if it was never turned on. Do not sleep in the vehicle: After turning on the heating, do not sleep in the vehicle, as it can easily cause dizziness or carbon monoxide poisoning, posing certain life risks. Check promptly if there is an unusual odor: If the heating emits an unusual or foul odor, promptly go to a repair shop for inspection to determine if there is an issue with the air conditioning or bacterial growth causing air pollution. Inhaling such air can have certain impacts on health, so timely cleaning is necessary.
1
5
Share

How to Choose Between BMW 5 Series and X3?

BMW 5 Series is a top-tier luxury mid-to-large executive sedan, where BMW has focused on elevating the model's premium feel to meet business needs. The BMW X3, on the other hand, is a mid-size SUV, and its inherent versatility as a sports utility vehicle makes it more practical than luxurious. The choice depends on your requirements. Below is a comparison of the two: 1. Powertrain Comparison: Both the BMW 5 Series and X3 are equipped with a 2.0T turbocharged engine and an 8-speed automatic transmission, delivering a maximum power of 252 horsepower and a 0-100 km/h acceleration time of 8.24 seconds. The BMW 5 Series has a total length of 5087mm and a wheelbase of 3108mm, while the X3 measures 4717mm in length with a 2864mm wheelbase. The 5 Series offers an absolute advantage in space and length for enhanced passenger comfort, though its trunk space is smaller than the X3's. 2. Feature Comparison: The 2018 BMW 525Li Luxury Package and the 2018 BMW X3 xDrive25i Luxury Package share identical safety configurations, including optional features. In terms of driving aids, the X3 adds automatic parking assist and hill descent control. For exterior features, the X3 includes a panoramic sunroof, power tailgate, and roof rails.
19
1
Share

Should You Release the Clutch or Brake First After Parking?

When parking, you should first press the clutch pedal, then press the brake pedal, or you can press both the clutch and brake pedals simultaneously. Here are the details: Consequences of Not Pressing the Clutch When Parking: If you don't press the clutch pedal, the engine will stall. Pressing the clutch pedal disconnects the engine from the transmission. The clutch is part of the car's drivetrain system, located between the engine and the transmission, and it can connect or disconnect the engine from the transmission. Parking and Engine Shutdown Sequence: For a manual transmission car, the correct sequence for parking and shutting off the engine is: after the vehicle comes to a complete stop with the brakes, first shift the gear to neutral (N), then engage the handbrake, and finally turn off the engine. After shutting off the engine, shift the gear to park (P).
10
0
Share

How Long Does It Take for Car Paint to Dry Completely After Spraying?

Car paint generally dries within one day after spraying. Introduction to Paint Spraying: Automotive paint spraying typically uses baking paint. In automobile manufacturing plants, after the frame and body are welded, the next step is paint spraying. Types include standard paint, metallic paint, and pearl paint. The process involves applying putty, sanding, and spraying. Precautions for Paint Spraying: Before using the vehicle, promptly remove dust from the body to reduce static electricity's attraction to dust. After rain, wash the car immediately. Rainwater on the car body contains highly concentrated acidic substances, which can damage the paint if not cleaned promptly.
11
4
Share

Is the Vehicle Inspection Office Open During National Day?

Most regions do not operate vehicle annual inspections during the National Day holiday, but some areas might still be open. It is recommended to call and inquire. Documents Required for Vehicle Inspection: Essential documents: Original and duplicate of the vehicle license, road and bridge fee IC card, road maintenance fee payment receipt, vehicle and vessel tax certificate, original insurance card, and original ID card. Vehicle Inspection Time Requirements: For vehicles that have been in use for 6 years, the annual inspection can be applied for within 3 months before the expiration date. It can only be done in advance, not postponed. Preparation Before Vehicle Inspection: First, confirm whether the vehicle has any traffic violations, as the vehicle management office will not accept vehicles with outstanding violations. You can check for any violations directly at the traffic police station.
4
5
Share

Where to Go for Vehicle Inspection?

Vehicle inspection should be conducted at the local vehicle management office. The following are the precautions for vehicle inspection: Start the vehicle in advance for preheating: During the annual inspection, the exhaust emission test will be conducted to check if it meets the standards, which involves the oxygen sensor and the three-way catalytic converter. Their optimal working temperature is between 400 to 800 degrees Celsius, so it is recommended that owners start the vehicle in advance for preheating in the external inspection area before the exhaust emission test. Clean the vehicle body in advance: Before the annual vehicle inspection, owners should clean the vehicle body in advance. Cleaning the vehicle body, engine compartment, and chassis beforehand can facilitate the inspection process and help pass the annual inspection. Check the lights in advance: The vehicle management office will inspect the vehicle's lights. If the lights are found to be too dim or too bright, the vehicle will be deemed unqualified and will not pass the annual inspection. It is recommended to restore the original state of the headlights before the annual inspection to pass the test.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.