What Causes White Debris to Blow Out When the Car Air Conditioner is Turned On?

What Causes Automatic Car Door Unlocking?

Possible reasons include one of the four doors not being properly closed when locking the car, or the trunk not being fully shut. For most vehicle models, if any door isn't properly closed, the car won't fully lock. Other reasons are as follows: 1. When locking, the doors appear closed and locked but aren't fully secured. In this case, even if the lock button is pressed, the doors won't lock. 2. After locking, other objects in your pocket within the remote's range might accidentally press the unlock button. Many people bundle car keys with other keys, making this scenario quite common. 3. Smart key settings. Some vehicle keys have separate functions for locking only the driver's door or all doors, so it's important to check which function is activated when locking. 4. Due to smart key configuration, which uses advanced RFID technology to automatically lock/unlock doors based on the proximity of the key's smart chip. When the owner approaches within a certain distance, doors automatically unlock; when moving away, they automatically lock.

8

1

Share

What are the new regulations for small vehicle annual inspections in 2020?

New regulations for vehicle annual inspections: Starting from November 20, 2020, non-operational small and micro passenger vehicles with 7-9 seats (excluding minivans) within 6 years are included in the exemption scope; for non-operational small and micro passenger vehicles (excluding minivans) over 6 years but under 10 years, the inspection cycle is relaxed from once a year to once every two years. This means private cars only need to undergo two on-site inspections within 10 years, specifically in the 6th and 8th years. Annual inspection content: Check whether the engine, chassis, body, and auxiliary equipment are clean, complete, and functional, whether the paint is uniform and aesthetically pleasing, whether major assemblies have been replaced, and whether they match the initial inspection records; Verify whether the vehicle's braking performance, steering control, lighting, exhaust, and other safety features comply with the "Technical Conditions for Safe Operation of Motor Vehicles"; Check whether the vehicle has been modified, altered, or reconstructed, whether the driving license, license plate, and vehicle records match the actual condition, whether there are any changes, and whether approval and modification procedures have been completed; Inspect whether the license plate, driving license, and enlarged license plate markings on the vehicle are damaged, altered, or illegible, and whether replacement is needed; For large vehicles, check whether the unit name or the street, township, or town name and the seating limit in the cab are spray-painted in Chinese imitation Song font on both sides of the door as required; For trucks, check whether the rear tailgate (including the trailer's rear tailgate) exterior is spray-painted with the vehicle number enlarged 2-3 times as required, and for individual or joint-operation vehicles, whether the word "individual" is spray-painted on both sides of the door. The characters must be clear, and no unit codes or other patterns are allowed (special cases require approval from the vehicle management office).

13

2

Share

Does Vehicle Damage Insurance Include Glass Insurance?

Vehicle glass insurance generally does not apply to the various deductible rates and deductible amounts specified in the main insurance. Vehicle glass insurance is an additional coverage to vehicle damage insurance, and the actual premium is not high. For comprehensive protection of the vehicle, it is advisable to add vehicle damage insurance, especially if the vehicle has expensive imported glass. Here is additional information: 1. Insurance Tips: Purchasing standalone glass breakage insurance is like buying insurance for your car's "face," which is very important. Therefore, standalone glass breakage insurance is also a very commonly used type of additional coverage. Many car owners habitually think that standalone glass breakage falls under the scope of vehicle damage insurance. In fact, if you file a claim with the insurance company without having purchased standalone glass breakage insurance, you will not be compensated. 2. Notes: The so-called standalone glass breakage insurance means that if the vehicle's windshield or window glass breaks independently while the vehicle is parked or in use, and no other parts are damaged, the insurance company will be responsible for compensation.

6

3

Share

What does it mean to release the handbrake?

Releasing the handbrake refers to the action of disengaging the mechanical handbrake when starting the car, otherwise it can easily cause wear and tear on the brake system hardware and lead to the car stalling. Generally speaking, driving with the handbrake engaged causes more damage to the brake components the faster the speed, and it can also cause some damage to the tires. Below is some related information: 1. Parking Brake: Commonly known as the handbrake, its function is to provide resistance to the car when parked, preventing it from rolling. The parking brake, whether manual or the parking gear in an automatic transmission, locks the drive shaft or rear wheels. The force applied by the parking brake is much less than that of the service brake, just enough to prevent the car from rolling on a slope. 2. Auto Hold Function: Traditional handbrakes require the driver to manually release the brake or skillfully coordinate the throttle and clutch for a smooth start on a slope. The AUTOHOLD auto hold function, however, uses a slope sensor to provide precise braking force through the controller. During startup, the parking control unit calculates information from sensors such as the clutch distance sensor, clutch engagement speed sensor, and throttle pedal sensor. When the driving force exceeds the rolling resistance, the parking brake is automatically released, allowing the car to start smoothly.

14

3

Share

Will the rim be damaged if I continue driving after a tire blowout?

If a regular tire blows out, you should not continue driving. Continuing to drive on a blown-out tire can cause more severe tire damage, making it irreparable, and may also lead to rim deformation. Rim deformation depends not only on the distance driven but also on the speed. Generally, if you drive slowly for about 100 meters after a blowout, the rim will not be damaged. However, if you drive a long distance or at high speed, it not only poses significant safety hazards but may also require replacing both the tire and the rim, resulting in higher costs. Below is additional information: 1. Pull over promptly: The correct approach for a regular tire blowout is to pull over immediately, replace the spare tire, and then drive to a repair shop or 4S store. For vehicles equipped with run-flat tires, they offer greater safety, as run-flat tires can still be driven at speeds not exceeding 80 km/h for about 80 km after a blowout. 2. Reason: This is because the sidewalls of run-flat tires are thicker, allowing them to support the vehicle and continue driving after a blowout, unlike regular tires, which may suddenly lose pressure, causing the rim to come into direct contact with hard surfaces like the ground. However, note that although run-flat tires have minimal impact on driving after a blowout, you should still drive to the nearest repair shop or 4S store for inspection. Driving too far may still damage the rim.

15

4

Share

What Causes Excessive Body Vibration?

Your vehicle may be experiencing the following conditions: 1. Severe engine carbon buildup: The most common cause of car vibration is a dirty throttle body or excessive carbon deposits in the fuel injectors. When there's too much carbon buildup inside the engine, the gasoline sprayed by the cold-start injector gets largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts. This makes the vehicle difficult to start—only when the carbon deposits become saturated with gasoline does the engine start more easily. After starting, the gasoline adsorbed on the carbon deposits gets drawn into the combustion chamber by the engine's vacuum, making the mixture too rich. This fluctuation between lean and rich mixtures causes idle vibration after cold starts. The lower the temperature, the more fuel is needed for cold starts, and carbon deposits significantly affect whether cold starts proceed smoothly. 2. Ignition system issues: Check the condition of the spark plugs, high-voltage wires, and ignition coils. Poor performance in the ignition system or weak sparking from the spark plugs can also lead to such symptoms. 3. Unstable fuel pressure: If you've already cleaned the engine carbon deposits, throttle body, replaced gaskets and spark plugs, but still notice body vibration at idle, it's recommended to visit a 4S shop to check the fuel supply pressure and the intake pressure sensor. Abnormal fuel pump pressure or incorrect readings/malfunctioning of the intake pressure sensor can both cause body vibration. 4. Aging engine components: Car vibration can also be related to worn engine mounts. Engine mounts act as the engine's shock absorption system, absorbing minor vibrations during operation. If the engine mounts are faulty, these vibrations can transfer to the steering wheel and cabin, causing noticeable shaking at idle.

16

1

Share

What Causes White Debris to Blow Out When the Car Air Conditioner is Turned On?

What Causes Automatic Car Door Unlocking?

What are the new regulations for small vehicle annual inspections in 2020?

Does Vehicle Damage Insurance Include Glass Insurance?

What does it mean to release the handbrake?

Will the rim be damaged if I continue driving after a tire blowout?

What Causes Excessive Body Vibration?

Why is only one reverse light on?

What Causes the Vehicle Body to Sway Left and Right?

Is the Vehicle Inspection Required Every Two Years?

How many liters of engine oil are needed for a 1.5T Envision oil change?