What Causes Water Pump Leakage?

1 Answers
TuckerRose
07/30/25 5:26am
Car water pump leakage is caused by: pump failure. If the car is in motion, it is recommended to stop and turn off the engine immediately for inspection. The related introduction is as follows: 1. Minor leakage will only leave traces of coolant color on the pump vent hole. If the water pump is severely damaged, it will directly leak, leading to symptoms such as high water temperature due to insufficient coolant. 2. A faulty water pump can cause leakage because the water in the car's radiator is missing, and the water in the radiator cannot circulate. The engine's heat will continue to rise, and other engine components will also be affected and deteriorate. In severe cases, it can directly cause engine damage. As long as there is a problem with the car engine's water pump, do not continue driving the car.
Was this review help?
17
0
Share
More Forum Discussions

How many cylinders does the FAW Besturn X40 engine have?

FAW Besturn X40 is equipped with a four-cylinder engine, which is an aluminum-iron hybrid power engine. It adopts a silent timing chain to reduce engine noise. The engine model is CA4GB16. FAW Besturn X40 is a compact SUV launched by Besturn. Its body dimensions are 4310mm in length, 1780mm in width, and 1680mm in height, with a wheelbase of 2600mm and a trunk capacity of 375 liters. FAW Besturn X40 is powered by a 1.6L naturally aspirated engine, with a maximum power of 84kW at 5500rpm and a maximum torque of 155Nm at 3600rpm. The engine of this vehicle incorporates Toyota 8A engine technology. In terms of the transmission system, the engine is paired with Aisin's all-new third-generation six-speed automatic manual transmission. This golden powertrain combination not only enhances the engine's performance but also ensures fuel efficiency.
1
0
Share

Where is the license plate number Ji E from?

Ji E is the license plate number for Xingtai City, Hebei Province. Ji is the abbreviation for Hebei Province. The license plate numbers for other regions in Hebei Province are as follows: Ji A for Shijiazhuang, Ji B for Tangshan, Ji C for Qinhuangdao, Ji D for Handan, Ji F for Baoding, Ji G for Zhangjiakou, Ji H for Chengde, Ji J for Cangzhou, Ji O for provincial government agencies, and Ji R for Langfang. The steps for installing a license plate are: 1. Screw in all the screw components at the fixed points for the license plate; 2. Once the license plate is in the correct position, tighten all the screws; 3. Align the cap with the cushion block, press it down, and secure it. The license plate serves as a numbering and information registration system for vehicles. Its main function is to identify the region to which the vehicle belongs and to trace the owner and registration details of the vehicle based on the license plate number.
7
1
Share

How often should the gear oil in a sedan be replaced?

Sedans should have their gear oil replaced every 2 years or 40,000 kilometers. The functions of gear oil include: lubrication, anti-wear, cooling, heat dissipation, anti-corrosion and rust prevention, cleaning, and reducing gear surface impact and noise. Its key properties are: 1. Appropriate viscosity and good viscosity-temperature characteristics; 2. Sufficient extreme pressure anti-wear performance; 3. Good anti-emulsification properties; 4. Excellent oxidation stability and thermal stability. The steps for replacing gear oil are: 1. Remove the gear, drain the old gear oil completely, and tighten the drain plug; 2. Add new gear oil, ensuring the oil level does not exceed the F line. Gear oil, also known as transmission lubricating oil, is primarily made from antioxidants, anti-foaming agents, and rust inhibitors.
9
3
Share

What to Do When the Dashboard Shows Abnormal Tire Pressure?

The tire pressure monitoring indicator is a yellow symbol, an irregular circle with no seal on top and four small spikes at the bottom, containing an exclamation mark inside. The illumination of the tire pressure monitoring indicator indicates abnormal tire pressure. Abnormal tire pressure is generally caused by the following three reasons: Abnormal tire pressure: It usually triggers an alarm when the pressure is below 1.8 bar or above 3.0 bar. At this point, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the tire pressure monitoring system will still record the previous data, causing the tire pressure monitoring indicator to illuminate. In this case, simply performing a tire pressure reset will resolve the issue. Damaged tire pressure sensor: The tire pressure sensor, which is used to monitor tire pressure, is directly installed inside the tire and connected to the tire inflation valve. If the tire pressure sensor is damaged due to impact while driving, it can also cause the tire pressure warning light to turn on. For sensor damage issues, the only solution is to replace it with a new component.
18
4
Share

Is Dongfeng Fengguang a Joint Venture or Domestic Vehicle?

Dongfeng Fengguang is a domestic vehicle brand. Dongfeng Fengguang is a passenger car brand launched by Dongfeng Motor, established in 2008. The company was formerly known as Dongfeng Yu'an Vehicle Co., Ltd., and later renamed Dongfeng Xiaokang Automobile Co., Ltd. The company aims to create intelligent SUV vehicles. Dongfeng Motor's vehicle lineup includes the compact SUV Fengguang E1, the compact SUV models Fengguang 500, Fengguang e3, and Fengguang S560. The mid-size SUV models include Fengguang 580, Fengguang 580PRO, Fengguang IX5, and Fengguang IX7, as well as the microvan model Fengguang 330. All models belong to the SUV series and microvan series, with no sedan versions offered. Dongfeng Motor is a state-owned joint venture enterprise. Dongfeng Motor Co., Ltd. was exclusively initiated by Dongfeng Motor Corporation and established in 1998. Currently headquartered in the Economic and Technological Development Zone of Wuhan, Hubei Province, it was formed by the Light Vehicle Plant, Diesel Engine Plant, and Foundry No. 3 Plant.
9
0
Share

What is the fuel consumption of diesel vehicles?

Generally, the fuel consumption of diesel vehicles ranges from 8-9 liters. Here are specific methods to reduce fuel consumption: 1. Lightly press the accelerator: The initial low-speed acceleration phase is the peak period of fuel consumption, so gently pressing the accelerator during startup to prevent excessively high RPM can effectively reduce fuel consumption. 2. Avoid high RPM: Try to avoid unnecessary high RPM, as fluctuating engine speeds can significantly increase fuel consumption. 3. Regular maintenance: Change the engine oil and clean carbon deposits. 4. Avoid emergency braking: Anticipating road conditions in advance not only improves driving safety but also saves fuel, such as gradually slowing down before traffic lights and utilizing inertia to coast.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.