What Causes Water Leakage in the Xingrui's Trunk?

1 Answers
VanessaFitz
07/29/25 11:34am
Xingrui's trunk water leakage reasons are as follows: Aging of Sealing Strips: Worn or aged sealing strips or trunk deformation can cause water leakage in the trunk. It must be addressed promptly to avoid damage to components inside the trunk. Blocked Drainage Pipes: Blocked drainage pipes can lead to water leakage. Since the trunk is not completely sealed, some mud or sand may enter the drainage pipes during rain or car washing. The drainage holes are designed to be small and can easily get clogged by dust or mud. Solutions: It is essential to clean the sealing rings multiple times during spring and autumn. You can use wet cotton to wipe them. If the car is to be left unused for an extended period, remember to perform a thorough cleaning before storage to prevent natural aging during parking.
Was this review help?
8
4
Share
More Forum Discussions

How to Turn on the Air Conditioning in a Geely Emgrand?

To turn on the air conditioning in a Geely Emgrand: 1. Rotate the knob in the air conditioning control area for cooling or heating; 2. Press the AC button when cooling is needed. The Geely Emgrand is a compact car with body dimensions of 4632mm in length, 1789mm in width, and 1470mm in height, with a wheelbase of 2650mm and a fuel tank capacity of 50 liters. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum power of 80kW at 6000rpm, paired with a 5-speed manual transmission. The Geely Emgrand features a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension.
9
2
Share

What is the normal pressure for car tires?

Car tires normally have a pressure between 2.2 and 2.5 bar. Tires are round, elastic rubber products mounted on various vehicles or machinery to roll on the ground. The functions of tires are: 1. To prevent severe vibrations and early damage to vehicle components, adapt to the high-speed performance of the vehicle, and reduce driving noise; 2. To support the full weight of the vehicle, bear the load of the car, and transmit forces and moments in other directions; 3. To transmit traction and braking torque, ensuring good adhesion between the wheels and the road surface, thereby improving the vehicle's power, braking, and passability.
16
4
Share

How to reset the maintenance reminder light on the Elantra?

The method to reset the maintenance reminder light on the Elantra is: Press the maintenance reset button located at the lower right corner of the odometer. The Elantra is a compact car with the following dimensions: length 4610mm, width 1800mm, height 1450mm, wheelbase 2700mm, fuel tank capacity 53 liters, and trunk capacity 458 liters. The Elantra is equipped with a 1.4T turbocharged engine, delivering a maximum power of 95.6kW at 5500 rpm, paired with a 7-speed dual-clutch transmission. It features a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension.
12
5
Share

Can You Still Drive When the Car Displays an Oil Change Reminder?

You can still drive when the car displays an oil change reminder, but avoid driving long distances and change the oil as soon as possible. The steps for changing the oil are: 1. Lift the car, remove the undercarriage cover, and place a container of about 10 liters under the oil drain plug; 2. Unscrew the oil drain plug, use an air gun to blow into the oil filler opening for two minutes, then tighten the drain plug and wipe it with a tissue to check for leaks; 3. Reinstall the undercarriage cover, lower the car, and use a funnel to add new oil through the filler opening. Precautions for changing the oil include: 1. Perform the change while the engine is warm to ensure complete drainage of old oil; 2. Ensure the correct amount of oil is added; 3. Start the engine after adding oil to check for leaks in all components; 4. After running the engine for 3 minutes, confirm the oil level is within the normal range.
13
0
Share

What is ABS Anti-lock Braking System?

ABS Anti-lock Braking System refers to the vehicle's anti-lock braking system, which consists of: ABS module, ABS master cylinder, oil pipes, and wheel speed sensors. Its function is: during vehicle braking, it automatically controls the braking force of the brakes to prevent the wheels from locking up, keeping them in a state of rolling and sliding, ensuring maximum adhesion between the wheels and the ground, and shortening the braking distance. The working principle process of automotive ABS is: 1. The ABS system monitors the rotation speed of all four wheels. When a wheel is about to lock up, the system releases the brake on that wheel to restore its rotation; 2. After the wheel is about to resume rotation, braking hydraulic pressure is applied to the brake; 3. When the wheel is about to lock up again, the system releases the brake on that specific wheel; 4. The system repeats the above process multiple times within one second to maximize the potential of the brakes, ensuring vehicle stability and normal operation.
6
3
Share

What are the effects of high oil viscosity?

The effects of high oil viscosity include: 1. Difficulty in cold engine starting; 2. Increased friction resistance on the surfaces of various components; 3. Lower rotational speed, making ignition harder; 4. Poor cleaning performance; 5. Poor fluidity, slower circulation speed, and reduced cooling effectiveness; 6. Larger carbon residue particles, higher freezing point, and a tendency to clog oil passages. The functions of engine oil are: 1. Reducing friction and high temperatures; 2. Cooling and lowering temperature; 3. Cleaning and purifying; 4. Shock absorption and cushioning; 5. Rust and corrosion prevention. Engine oil, also known as engine lubricant, consists of: 1. Base oil, which is the main component of lubricating oil, determining its basic properties; 2. Additives, which compensate for and improve the shortcomings of the base oil's performance.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.