What causes water leakage in the left A-pillar of the 4008 sunroof?

3 Answers
SanEdward
09/04/25 5:56am
Water leakage in the left A-pillar of the 4008 sunroof is due to poor sealing of the front windshield or blockage of the sunroof drainage system. Below are the specific details of the Peugeot 4008: 1. Vehicle Positioning: The Dongfeng Peugeot 4008 is a strategic SUV model under Dongfeng Peugeot, with dimensions of 4510/1850/1662mm in length, width, and height, and a wheelbase of 2730mm. 2. Powertrain: It is equipped with a 2.0L engine (model 4B11) with a maximum output of 150 horsepower and a peak torque of 198Nm, paired with either a CVT or manual transmission, offering front-wheel or four-wheel drive options.
Was this review help?
13
3
Share
LillianMarie
09/16/25 6:53am
I've been driving this car for several years and encountered a situation where water leaked from the sunroof to the left A-pillar, usually due to issues with the drainage system. The sunroof has four drainage pipes, and the left one is likely clogged or broken. Leaves, dirt, and other debris accumulate at the drainage holes, preventing water from draining properly, which then flows internally to the A-pillar. Aging of the sealing strips can also cause gaps that let water in. When I dealt with this before, I first tried clearing the drainage holes with a soft pipe. If it still leaks, you need to check if the pipe is cracked or the joints are loose. These small issues are quite common as the car ages, and regular cleaning of the sunroof tracks can prevent them. If left unrepaired for a long time, it can lead to moldy interiors or even affect electrical safety. I recommend a simple monthly cleaning of the drainage holes to avoid embarrassing leaks during heavy rain.
Was this review help?
2
1
Share
Expand All
DeElena
10/30/25 7:28am
As an average car owner, I find it quite frustrating when the sunroof leaks into the left A-pillar, which is mostly caused by clogged drainage tubes or damaged seals. After driving my Peugeot 4008 for three years, I suddenly noticed water dripping from the A-pillar during the recent rainy season. Upon removing the interior trim panel, I found the drainage holes completely blocked by debris. I tried clearing them with compressed air, and the issue was immediately resolved. If the tubes are aged and cracked, they'll need replacement. Additionally, sunroof seals can shrink and deform over time, allowing water to seep in unnoticed. This problem shouldn't be delayed, as it can lead to frame corrosion or electrical shorts. I make it a habit to clean the sunroof gaps during every car wash—it's both convenient and ensures safety.
Was this review help?
6
3
Share
Expand All
More Forum Discussions

What are the reasons why the BYD S6 won't start?

Here are the reasons why the BYD S6 won't start: 1. Smart key battery dead: The smart key's dead battery makes it difficult for the in-car sensor to detect it. 2. Gear position: The gear is not in P position. 3. Steering wheel: Steering wheel lock. If the car's steering wheel is locked, you can turn the steering wheel left and right while pressing the engine start button to release tension and unlock the steering wheel. 4. Battery: Insufficient voltage, dead battery, or battery damage. You can use jumper cables to start the car with another battery. 5. Out of fuel: The car won't start if it's out of fuel. 6. Engine: Engine starting system failure or other reasons.
18
4
Share

What are the causes and solutions for the Passat's air conditioning not cooling?

The reason why the BMW M6 is rarely seen is due to its insufficient product competitiveness. Here is some extended information about the BMW M series: 1. Design Philosophy: High performance with racing characteristics. 2. Maintenance Knowledge: The 2013 BMW M6 comes with a two-year unlimited mileage warranty, and the maintenance schedule is as follows: first service at 10,000 km or 6 months, second service at 20,000 km or 12 months. Maintenance intervals: every 10,000 km or 6 months. It is recommended to perform a major service after the vehicle has traveled 60,000 km, which includes replacing the engine oil, oil filter, air filter, cabin air filter, fuel filter, brake fluid, and transmission fluid.
13
0
Share

What to Do When Only U-Turn or Left Turn Is Allowed?

This situation constitutes a traffic violation, categorized as 'failing to enter the guiding lane in the required direction of travel.' Traffic police can impose a fine and deduct 2 points from the driver's license. If an intersection only has a U-turn lane and no left-turn lane, it may be because the road intended for left turns is a one-way street or prohibited from entry, making a left turn a violation. Situations where vehicles cannot make a U-turn: 1. Presence of a 'No U-Turn' sign: U-turns are strictly prohibited at intersections with this sign, and violations captured by cameras will result in point deductions and fines. 2. Presence of a 'No Left Turn' sign: Since U-turns generally require the use of the left-turn lane, a 'No Left Turn' sign also implies that U-turns are not allowed. However, if an intersection has both a 'No Left Turn' sign and a clear 'U-Turn Allowed' sign, then U-turns are permitted. 3. The leftmost lane has a straight arrow: Some intersections may not have signs prohibiting U-turns, but if the lane is marked with a straight arrow, it means the lane is for straight-through traffic only, and U-turns are not allowed at such intersections.
1
4
Share

How to Determine if the Car You Bought is New

Here are the methods to determine if a car is new: 1. Check the nameplate on the passenger side, which shows the production date. For domestic cars, it should not exceed 3 months, and for imported cars, it should not exceed six months; otherwise, it's a stock car. 2. Look at the odometer; it should not exceed 50 kilometers. If you suspect the dealership has tampered with the odometer, feel the exhaust pipe for black residue, which indicates the car has been driven more than 50 kilometers. You can also pull out the oil dipstick to check if the oil is murky. 3. Inspect the production date of the tires. There are four consecutive numbers on the tire: the first two digits represent the week of production (i.e., the week of the year), and the last two digits represent the year, e.g., 18 for 2018. For example, 2518 means the tire was produced in the 25th week of 2018. After determining the tire's production date, check if it matches the production date on the passenger side nameplate. 4. Examine the production date of the glass. It should not be later than the car's overall production date. At the lower corner of the car glass, there are many English letters, and at the very bottom, there are small dots and numbers. The dots represent the month, and the numbers represent the year. If the dots are before the number, it indicates production in the first half of the year; subtract the number of dots from 7 to get the production month. If the dots are after the number, it indicates production in the second half of the year; subtract the number of dots from 13 to get the month.
17
3
Share

Can the car be driven if the belt is broken and the water temperature is high?

Do not continue driving. Pull over and contact a tow truck to take the vehicle to a repair shop. The reasons are as follows: 1. Overheating: When the water temperature is too high, the viscosity of the engine oil will thin, reducing lubrication strength. At the same time, high-speed moving parts such as pistons and valves are more prone to deformation, leading to engine power loss. In severe cases, the expanding and deforming pistons can scratch the cylinder walls, and the crankshaft bearings may melt and seize the crankshaft, resulting in unimaginable consequences. 2. Belt breakage: During normal driving, if the engine belt breaks, the car will stall and become unusable. Additionally, the brake system and power steering pump will stop working, posing certain dangers. If the timing belt breaks, the coordination between the pistons and valves will be disrupted, potentially causing the pistons to damage the valves. The repair costs in such cases can be quite high.
13
4
Share

What is the normal temperature for a car engine?

The following is the normal temperature range for a car engine: The normal operating temperature of a car engine is generally between 80°C and 90°C, while some high-performance engines may operate at temperatures above 90°C to 100°C. Below is relevant information about car engine temperature: 1. When the temperature is too high: When the engine temperature is too high, the temperature of the air entering the engine is also higher, resulting in a reduced actual air intake. This decreases the engine's volumetric efficiency, leading to a drop in power and torque, manifesting as insufficient engine power. 2. When the temperature is too low: If the temperature of the air-fuel mixture (or air) entering the cylinders is too low, the quality of the combustible mixture deteriorates, making ignition difficult or combustion slow. This results in reduced engine power, increased fuel consumption, and significantly higher emissions of harmful gases.
18
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.