What Causes Water Leakage in the Cruze Trunk?

1 Answers
PaisleeMarie
07/30/25 4:04am
The reasons for water leakage in the Cruze trunk are as follows: 1. Sealing strip: The waterproofing of various parts of the car body is ensured by sealing strips. These strips are made of rubber material, which has certain strength and hardness and does not deform under certain pressure conditions. However, long-term exposure to air can cause natural aging of the rubber, and high frequency of use can lead to wear and tear. Damaged sealing strips allow water to seep in. 2. Trunk deformation: The design of the car trunk follows certain rules, with corresponding drainage curvature designs in areas A, B, C, and D. If the shape of the trunk is compromised, severe water leakage can occur during rain.
Was this review help?
5
1
Share
More Forum Discussions

What is the engine model of the Lynk & Co 03+?

The engine model of the Lynk & Co 03+ is JLH3G15TD, which is equipped with a 1.5T turbocharged engine and paired with a 6-speed manual transmission. This engine has a maximum power of 115kW, a maximum torque of 245Nm, a maximum power speed of 5000rpm, and a maximum torque speed range of 1450 to 4000rpm. The engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. The dimensions of the Lynk & Co 03+ are 4639mm in length, 1840mm in width, and 1472mm in height, with a wheelbase of 2730mm. The car adopts a front-engine, front-wheel-drive layout, with a MacPherson independent suspension at the front and a multi-link independent suspension at the rear.
5
0
Share

What does a red battery indicator on the dashboard mean?

A red battery indicator on the dashboard is a warning that the engine is not generating electricity. You should: 1. Check if there is oxidation on the battery terminals. If there is, clean and polish them before reinstalling and testing the vehicle, as oxidation can hinder battery charging; 2. Check for any signs of looseness in the battery's positive and negative cables. The reasons for this indicator light appearing include: 1. The generator belt is loose or slipping; 2. The generator is producing insufficient power; 3. The battery is damaged; 4. The generator's rectifier bridge is damaged, causing uncontrolled output voltage; 5. The generator belt is broken, the generator is damaged, or the positive/negative cables are broken; 6. Electrical device short circuits can also cause the indicator light to illuminate, though the brightness may not be very strong.
4
0
Share

How often should the coolant be changed in the new Lavida?

The coolant in the new Lavida should be changed every two years. Coolant prevents the freezing of the liquid in the cooling system during cold winter parking, which could otherwise cause the radiator to crack or damage the engine cylinder block or head. It is commonly used in automobiles, railway diesel locomotives, tractors, ships, engines, radiators, and various mechanical equipment, as well as in the cooling systems of diesel and gasoline engines. Coolant offers multiple functions, including antifreeze, anti-boil, anti-corrosion, and anti-scale. The Lavida measures 4605mm in length, 1765mm in width, and 1460mm in height, with a wheelbase of 2610mm. The car is available with two engine options: a 1.6L naturally aspirated engine and a 1.4TSI engine.
4
0
Share

How to start the car when the Sylphy key battery is dead?

Sylphy key battery dead starting methods: 1. If the car is not equipped with a one-touch start intelligent control system, simply use the mechanical key to start; 2. If equipped with a one-touch start intelligent control system, shift the gear lever to P position, firmly press the foot brake, touch the ignition switch with the smart key, and within 10 seconds of the buzzer sounding, press the brake pedal and push the ignition switch. The Sylphy's dimensions are 4641mm in length, 1815mm in width, and 1447mm in height, with a wheelbase of 2712mm. The car's safety features include an engine immobilizer system, hill start assist system, vehicle dynamic control system, tire pressure monitoring system, electronic brake force distribution system, anti-lock braking system, and emergency brake warning system.
15
5
Share

How to replace the battery in a Volkswagen CC car key?

To replace the battery in a Volkswagen CC car key, follow these steps: 1. Press the button indicated by the circle to release and remove the spare key; 2. Push the upper cover plate of the key with force to remove it; 3. Pry out the old battery, install the new one, and then follow the reverse steps to complete the replacement. As the key is an electronic product, it is important to prevent moisture or water damage. The dimensions of the Volkswagen CC are 4799mm in length, 1855mm in width, and 1417mm in height, with a wheelbase of 2712mm. The vehicle is equipped with features such as an advanced adaptive cruise system, intelligent parking assist system, head-up display system, digital LCD instrument panel, lane keeping system, and lane change assist system.
20
1
Share

Can the Car Be Locked If the Door Is Not Closed Properly?

If the car door is not closed properly, the car cannot be locked. When the car is powered on, the dashboard will indicate which door is not closed properly. If the car is turned off and the door is not closed properly, using the key to lock the car will not work because the vehicle's computer cannot receive the locking signal. After locking the car, it is advisable to habitually pull the door handle to confirm whether the car is indeed locked. There are several ways to lock a vehicle: 1. Use the remote key to lock the car; 2. Use the mechanical key on the key to lock it; 3. Use a mobile app to operate, but not all vehicles support this feature—only those with remote start functionality can use the mobile app to lock the car.
16
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.