What Causes Water Leakage in the Car Trunk?

1 Answers
SanOwen
07/29/25 9:10pm
Water leakage in the car trunk can be caused by the following reasons: 1. Sealing Strips: The waterproofing of various parts of the car body is ensured by sealing strips, which are made of rubber material. These strips have a certain degree of strength and hardness and do not deform under certain pressure conditions. However, prolonged exposure to the air causes natural aging of the rubber, and high-frequency use can lead to wear and tear. Damaged sealing strips allow water to seep in. Solution: Replace the sealing strips in a timely manner. 2. Trunk Deformation: The design of the car trunk follows specific rules, with drainage arc designs in areas A, B, C, and D. If the shape of the trunk is compromised, severe water leakage can occur during rain. Solution: Repair the trunk promptly.
Was this review help?
15
1
Share
More Forum Discussions

Why is the Geely Vision's horn not working?

The reasons why the Geely Vision's horn is not working are as follows: 1. Water ingress due to poor sealing: The horn is internally sealed, but if the sealing is not tight, water vapor can easily enter during car washing, causing the contacts to become damp and malfunction. 2. Poor contact at the electromagnetic coil terminal: Some horns have aluminum metal connections at the terminals of the enameled wire inside the electromagnetic coil. If the insulation paint on the ends of the enameled wire is not properly removed or the rivet connection is loose, a poor connection can occur, leading to the horn not working. This type of fault can only be resolved by replacement, not repair. 3. Contact erosion due to prolonged horn use: Pressing the horn for extended periods can cause the contacts to erode, creating resistance. This reduces the current through the electromagnetic coil, preventing it from attracting the armature to drive the diaphragm and produce sound. However, when the horn is pressed repeatedly, the momentary high current can still pass through the resistance, allowing intermittent operation.
17
1
Share

What is the wheel size of the Buick Excelle?

The high-end version of the Buick Excelle uses tires of the model 195/55R15/85H, while other models are equipped with 185/65R14/86H. Below is an introduction to the Buick Excelle: 1. Exterior: In terms of appearance, the new-generation Excelle adopts Buick's latest family design language, featuring a new winged grille with dark mesh texture and a high-gloss electroplated shield-shaped outline, showcasing youthful vitality. The winged headlights and grille form a diving angle, creating a dynamic look. 2. Interior: Inside, the new car continues Buick's 360-degree wraparound integrated design, with lightweight design elements throughout. The center console features a high-contrast visual effect with integrated high-gloss black and chrome trim, highlighting a sense of technology. The seats are made of suede material, which is rare in its class, providing a comfortable riding experience.
17
3
Share

Where is the fuse box located in the Mercedes-Benz R320?

The fuse box is located under the cover on the front passenger side of the dashboard. Below is some relevant information about the Mercedes-Benz R-Class: 1. Exterior Design: In terms of exterior design, the R300 maintains the consistent AMG body appearance of the R-Class, fully inheriting the R-Class's steady, confident, and dynamic style. At the same time, the R300 retains the arched roof, a typical design element of the R-Class. This design forms a streamlined connection between the A-pillar and D-pillar, creating a sporty and rounded profile. 2. Space: The interior space and comfort of the R300 meet first-class standards. The classic 6-seat design and spacious seating distance enhance passenger comfort. The headroom and shoulder room elevate the spaciousness and comfort level of the Mercedes-Benz R-Class to new heights.
19
4
Share

What Does the Exclamation Mark in a Vehicle Mean?

Here are introductions to different yellow exclamation marks on the car dashboard: 1. Tire Pressure Monitoring Indicator: When this light is on, it indicates that the tire pressure of a certain tire is abnormal. You should stop the car as soon as possible to check if there is any abnormality in the tires. If there is an abnormality, do not continue driving. If no abnormality is visible, you must still go to a car repair shop for inspection as soon as possible. 2. General Fault Indicator: This light being on can be related to many reasons, such as poor contact or malfunction of external lights (position lights, tail lights, turn signals, rear fog lights, license plate lights, etc.), damage to the wiring harness in the trunk, traction control system warning or malfunction, parking sensor malfunction, etc. Among these, the most common issues are brake light and license plate light damage. 3. Automatic Transmission Fault Warning Light: When this light is on, it indicates that there is a fault in the transmission or the transmission lubricant is below the normal range, or the lubricant needs to be replaced.
18
3
Share

What Causes the Abnormal Noise in the Clutch Pedal?

Generally, there are two situations that cause abnormal noise in the clutch, mostly due to incorrect operation by the driver. The details are as follows: 1. Many drivers have the habit of keeping their foot on the clutch pedal even after shifting gears. Maintaining this habit for a long time can damage the clutch and cause wear on the clutch plate. The abnormal noise in such cases is often from the clutch release bearing. 2. Additionally, when pressing the clutch pedal, a distinct abnormal noise can be heard from the clutch area. This noise becomes more noticeable when the pedal is released. The main causes of this issue are: broken clutch pressure plate springs or a loose release bearing; fractured clutch plates; broken or excessively worn clutch release levers or broken adjustment bolts. Most of these issues arise from quality problems with the clutch release bearing.
11
5
Share

What are the reasons for the non-responsive central locking system in the 2010 Lova?

The reasons for the non-responsive central locking system in the 2010 Lova may include: central lock malfunction, requiring replacement of the central lock; central lock switch failure, necessitating replacement of the switch; wiring issues, requiring inspection of the central locking system's wiring; key malfunction, requiring re-matching of the vehicle's remote key. Below is additional information: 1. Vehicle central control: The vehicle central control is the area that manages comfort and entertainment devices such as the car's air conditioning and audio system. It includes the central control door lock system, allowing the driver to control all door locks and window operations. 2. Central control door lock system: The central control door lock system primarily features three functions: central control, speed control, and individual control. The driver can control all door lock switches, and when the vehicle reaches a certain speed, the doors automatically lock. Additionally, each door has an independent switch for individual control.
11
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.