What Causes Water Leakage in the Avancier's Trunk?

Why does the H9 have such a bad reputation?

In fact, the early reputation of the Haval H9 was indeed unsatisfactory. Before 2017, the biggest issue with the Haval H9 was that the engine tended to burn oil. Additionally, the third-row space of the Haval H9 could only be used for emergencies, as the legroom was not spacious enough, and the seat cushion design was relatively thin, resulting in poor comfort. The common problems of the Haval H9 are introduced as follows: 1. Transmission jerking: This issue also appeared in some models. Some owners reported that the H9 would jerk when shifting gears. After repairs, the 4S shop indicated that it was caused by poor matching between the engine and the transmission, not a quality issue with the transmission itself. 2. Audio system failure: The Haval H9's central control screen had a certain probability of going black during driving, after which the entire infotainment system became uncontrollable. 3. Engine oil leakage: This common problem did not occur in every vehicle and was a minority situation. However, some unlucky owners still encountered engine oil leakage, mainly due to poor sealing of the oil pan.

16

1

Share

What are the symptoms of a broken half shaft in the Magotan?

The half shaft deformation in the Magotan can cause severe shaking when driving. Here is the detailed introduction: 1. If a car's half shaft is deformed, it may produce abnormal noises and bumps when driving lightly, and in severe cases, the car may not be able to move, leading to phenomena such as the car pulling to one side and severe shaking. 2. Over time, the deformation of a car's half shaft can cause uneven tire wear. Below is an example based on the 2020 Magotan: 1. Body size: It is a mid-size car with a body length of 4865mm, width of 1832mm, height of 1471mm, a wheelbase of 2871mm, a fuel tank capacity of 66 liters, and a trunk capacity of 533 liters. 2. Power: The 2020 Magotan is equipped with a 1.4L turbocharged engine, delivering a maximum horsepower of 150 PS, a maximum power of 110 kW, a maximum torque of 250 Nm, paired with a 7-speed dual-clutch transmission.

12

0

Share

Can the BMW positioning system be turned off?

BMW's positioning system can be turned off by cutting off its power supply. The vehicle positioning system allows you to check the vehicle's status at any time and ensures its safety. It is recommended not to turn it off unless absolutely necessary. The vehicle positioning system consists of the Global Positioning System (GPS) and Geographic Information System (GIS), enabling tracking and positioning of the vehicle. Functions of the vehicle positioning system: 1. Real-time monitoring: The GPS vehicle management system uses mobile GPRS as the carrier for monitoring data, achieving true all-weather real-time monitoring of the vehicle (speed, direction, etc.), with a monitoring frequency of up to 1 second. 2. Driving information management: The system can download, replay, and save historical driving data of the vehicle. 3. Overspeed alarm: When the vehicle's speed exceeds the set limit, the system will issue an overspeed alarm with sound and a pop-up window alert. 4. Route tracking: It can record the driving route of a single vehicle or all vehicles in real time. 5. Area alarm function: Restricted areas can be set, and the system will issue an alarm when the vehicle enters a monitored restricted area.

16

4

Share

Can the Porsche 911 Back Seat Accommodate Passengers?

It can accommodate passengers, but it is relatively cramped due to the limited rear space in the Porsche 911. Additional information is as follows: 1. Overview of the Porsche 911: It is a sports car produced by Porsche AG in Stuttgart, Germany, designed by Ferdinand Alexander Porsche. 2. Exterior: A perfect blend of tradition and modernity. 3. Tradition: The overall design concept of the new-generation 911 inherits the classic elements of the 911 model. 4. Modernity: The new-generation 911 incorporates contemporary modifications and adjustments in details, such as the integrated embedded design of the fog lights and front spoiler, and the redesigned rear taillights, which enhance its sharp and dynamic appearance.

1

2

Share

Where to Add Water in a Mercedes-Benz?

Water is added in the coolant reservoir located on the right side under the hood. Note that the liquid to be added is coolant. Below is relevant information about coolant: 1. Function of Coolant: As an essential maintenance product for the engine, coolant primarily serves to cool the engine. Additionally, it provides antifreeze, anti-boil, anti-corrosion, anti-rust, and anti-scale functions, lubricates vehicle components, and reduces wear on parts. Coolant is a particularly important part of a car's engine. However, vehicle owners should be cautious when using coolant—avoid blindly replacing or arbitrarily adding it to prevent incorrect addition methods from damaging the engine and affecting overall vehicle performance. 2. Coolant Level: The liquid level should be maintained between the min and max marks. If it falls below min, it needs to be replenished with the same brand and specification of coolant, or the entire coolant should be replaced. The choice of coolant mainly depends on the local minimum temperature, and it is generally all-season type when leaving the factory. Some owners may use water as a substitute in summer, which is not entirely inadvisable but not recommended.

5

4

Share

Where is the central locking fuse located in the Passat Lingyu?

The central locking fuse of the car is located in the fuse box on the left side under the steering wheel. Additional information is as follows: I. Central Locking: The full name is Central Control Door Lock, which is an automotive accessory. Using this lock allows you to remotely open and lock doors without inserting the key into the lock hole. It consists of a door lock switch, an actuator, and a controller. II. Functions: 1. Central Control: When the driver locks the door next to them, all other doors are simultaneously locked. The driver can use the door lock switch to open all doors at once or open a specific door individually. 2. Speed Control: When the vehicle reaches a certain speed, all doors automatically lock to prevent passengers from accidentally opening the doors by operating the door handles. 3. Individual Control: In addition to the door next to the driver, other doors are equipped with separate spring lock switches, allowing independent control of the opening and locking of a single door.

5

4

Share

What Causes Water Leakage in the Avancier's Trunk?

Why does the H9 have such a bad reputation?

What are the symptoms of a broken half shaft in the Magotan?

Can the BMW positioning system be turned off?

Can the Porsche 911 Back Seat Accommodate Passengers?

Where to Add Water in a Mercedes-Benz?

Where is the central locking fuse located in the Passat Lingyu?

Why is the A4L reversing camera not switching?

Why was the Baojun RM5 discontinued?

What is the difference between Audi A7 and S7?

What Causes the Engine Malfunction Light to Illuminate in the Buick Excelle After Powering On?