What Causes Water Leakage in a Car?

2 Answers
LaAaron
07/25/25 1:36pm
Water leakage in a car can be caused by the following reasons: 1. Condensation water dripping from the air conditioning system during use. 2. A malfunction in the radiator cooling system causing water leakage underneath the car. 3. Possible windshield washer fluid leakage; check the washer fluid reservoir, hoses, and connections for looseness or damage. Here are some methods to inspect and troubleshoot the issue: 1. Check if the radiator coolant is low, then inspect the cooling system hoses for looseness or damage, and look for any scratches or damage at the bottom of the radiator. 2. Ensure the coolant reservoir is not overfilled, as it may overflow when the temperature rises. 3. Inspect the windshield washer fluid reservoir, hoses, and connections for looseness or damage. 4. Determine if the dripping is caused by condensation water discharge from prolonged air conditioning use in hot weather, which is a normal phenomenon.
Was this review help?
19
0
Share
DelJuliet
08/11/25 8:49pm
Last time my car leaked water, it was really scary. Later, I found out that the sunroof drain was clogged, causing rainwater to flow into the car and soak the carpet. In fact, there are many reasons for car water leaks. Common ones include aging body seals leading to rainwater leakage through door gaps, or clogged condensate drainage pipes in the air conditioning system dripping onto the footwell mats in hot weather. If the car's air conditioner drips water in summer, it might be due to a clogged evaporator drain hole, which needs cleaning. Also, the sunroof frame's sealing rubber can deform over time and cause leaks. That time, I spent some time cleaning the drain hole and fixed the issue, but in severe cases, new parts may need replacement. If the radiator or coolant tank cracks, the leaking coolant is green, while regular water is clear. Observing the color of the liquid on the ground after parking can help make a preliminary judgment. In short, don’t take water leaks lightly—they can damage circuit boards or promote mold growth. Getting timely repairs is key.
Was this review help?
7
2
Share
Expand All
More Forum Discussions

How long does it take to charge a 12V motorcycle battery?

When charging a motorcycle battery with a 12V charger, the time required typically ranges from 4 to 10 hours, depending on the battery's discharge level and the charger's output current and voltage. Charger voltage and current: The charger used for motorcycle batteries should have an output voltage between 13.5V and 15V. The charging current should be one-tenth of the battery's rated capacity or a small current not exceeding 1A for 4-10 hours. High current charging is harmful to the battery. About batteries: A battery, also known as an accumulator, is a device that converts chemical energy into electrical energy. Its function is to supply power to the engine. When starting the vehicle, the battery discharges electricity to the starter motor, which then drives the flywheel and crankshaft to start the vehicle.
20
5
Share

What Causes Water Leakage Above the Car Door?

Reasons for water leakage above the car door: The door seal strip is not tightly sealed, causing water leakage; The drainage outlet at the bottom of the door is blocked, preventing water from draining out; The waterproof membrane inside the door is damaged, allowing water to flow directly onto the door sill trim and then onto the floor mat. Below are detailed solutions: Door seal strip not tightly sealed: If the seal strip is severely damaged or deformed, it needs to be replaced with a new one. If the exact location of the damage cannot be identified, adjust the door inward slightly to ensure tighter contact between the door seal strip and the door, making it harder for water to leak in. Blocked drainage outlet at the bottom of the door: Open the silicone strip at the bottom of the door to reveal a square-shaped drainage outlet. If the car hasn't been cleaned for a long time, mud and debris may accumulate. Use a flathead screwdriver to clear the blocked debris, allowing water to drain out and solving the leakage issue. Damaged waterproof membrane inside the door: First, sprinkle some water on the window, then open the door to check for any signs of water leakage. Use a T-20 spline, T-30 spline, and a flathead screwdriver to remove the door trim panel of the leaking door. Inside, you will see a plastic film—this waterproof membrane is adhered to the door panel with sealant. Dust ingress can cause the sealant to lose its adhesive properties, allowing water to seep through the gaps onto the door sill and eventually into the car. In such cases, the waterproof membrane needs to be replaced.
5
5
Share

Is it dangerous if the ABS yellow light on the car stays on?

It does not affect the car itself, but it may impact emergency braking while driving, as the ABS (Anti-lock Braking System) is designed to ensure the safety of passengers during emergency braking. Normally, the ABS light will illuminate for a few seconds during the car's initial startup as part of the self-check process. However, if the light remains on, it indicates a malfunction in the ABS system, or the ABS sensor might be obstructed. It is recommended to visit a 4S shop for inspection. If a fault is detected, timely repairs are necessary. Possible causes for the ABS light staying on include: 1. Low battery voltage: Check if the battery voltage is at 12V. 2. ABS circuit failure: Inspect the relay and ABS control circuit for broken wires, loose connections, or an improperly secured relay. 3. Low brake fluid level in the master cylinder reservoir: If the fluid level is too low, add brake fluid to bring it to the normal level. 4. Wheel speed sensor failure: Check the four wheel speed sensors for any foreign objects. Also, verify if the fuse is blown.
14
4
Share

Is it necessary to press the accelerator to 5000 RPM for exhaust emission testing during annual inspection?

It is required to press the accelerator to 5000 RPM for exhaust emission testing. Below are the precautions for the annual inspection: 1. Exhaust emission testing: During the annual inspection, the vehicle's exhaust emissions will be checked for compliance, specifically the oxygen sensor and the three-way catalytic converter. The optimal working temperature range is 400 to 800 degrees Celsius, so it is recommended that owners start the vehicle in advance in the external inspection area to warm it up before the exhaust emission test, which will increase the pass rate. 2. Vehicle cleaning: Before the annual inspection, owners should clean the vehicle body, engine compartment, and chassis in advance to facilitate the inspection process and improve the chances of passing. 3. Lighting check: The vehicle management office will inspect the vehicle's lights. If the lights are found to be too dim or too bright, the vehicle will be deemed unqualified and will not pass the annual inspection. It is advisable to restore the original headlights' condition before the inspection to ensure compliance.
6
1
Share

How fast can a 125cc motorcycle go?

115 mph. In China, motorcycles with 125cc engines are produced by brands such as Suzuki Haojue, Prince Motorcycle, Honda, BMW, and Yamaha, all of which have derived models based on this engine size. Increasing the ignition energy of a 125cc motorcycle promotes better combustion, which in turn enhances power. This method ensures the motorcycle has more sufficient power, improving both acceleration and top speed. Below is relevant information: Motorcycle lifespan: The lifespan and continuous mileage of a motorcycle are largely related to its design. Relevant data shows that a new motorcycle tire has a lifespan of about 50,000 kilometers, while the engine's lifespan is around 100,000 kilometers. Safety precautions: During the use of a motorcycle, proper vehicle maintenance should be performed to minimize high-intensity continuous operation and avoid excessive wear. When riding for long periods continuously, it's also important to consider one's physical endurance, which is not only a responsibility to oneself but also to others.
4
2
Share

Should the motorcycle fuel switch be turned up or down?

Motorcycle fuel switch should be turned up. The switch labeled 'fuel' is the fuel tank valve. On most models, turning the lever upward (with the arrow pointing downward) accesses the reserve tank, while turning it downward (with the arrow pointing upward) accesses the main tank. A horizontal position indicates the off state. Additional information about motorcycles is as follows: Definition: A motorcycle is a two- or three-wheeled vehicle powered by a gasoline engine, steered by handlebars for front-wheel direction. It is lightweight, agile, and fast, widely used for patrols, passenger and cargo transport, and also serves as sports equipment. Motorcycles are categorized into street bikes, road racing motorcycles, off-road motorcycles, cruisers, and tourers. Basic components: A motorcycle consists of five main parts - the engine, transmission system, running gear, steering and braking systems, and electrical instrumentation equipment. This includes the overall structure and names of various components.
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.