What Causes Water Leakage at the Seam of the Baojun 510 Rear Trunk Sheet Metal?

1 Answers
LucasLee
07/29/25 6:19pm
Water leakage at the seam of the Baojun 510 rear trunk sheet metal may be due to aging sealing strips or clogged trunk drainage holes. Solutions for Aging Sealing Strips: First, check the sealing strips for large cracks or breaks. If the sealing strip is cracked or has significant damage, adhesive can be used for repair. Specialized adhesive for sealing strips makes it easy to fix large cracks. If the sealing strip is severely damaged or excessively aged, it is best to replace it with a new one. Solutions for Clogged Drainage Holes: The trunk drainage holes are located beneath the spare tire in the trunk, which is the lowest part of the trunk. These holes are typically blocked with rubber plugs to prevent rainwater from flowing back into the vehicle. The trunk usually has one or two drainage holes, and removing the rubber plugs allows water to drain. If there is a leak, identify the root cause and address it at the source.
Was this review help?
5
0
Share
More Forum Discussions

Is the license number on the driver's license the same as the ID card number?

Is the license number on the driver's license the same as the ID card number_58 Auto The license number on the driver's license is the ID card number, specifically located below the document name on the main page and the auxiliary page of the driver's license. Below is a detailed introduction to the driver's license number: Function of the driver's license number: The driver's license number uses the ID card number, which establishes a certain correlation between the driver's license and the ID card, making it convenient for traffic police to quickly compare the ID card and the driver's license. At the same time, in some cases, the driver's license can serve as personal identification. What to do if the driver's license number is unclear: If the driver's license number and file number become unclear due to damage or staining, you should go to the vehicle management office as soon as possible to apply for a replacement. It is also advisable to avoid driving motor vehicles during this time.
11
4
Share

Should You Apply the Handbrake When Parking an Automatic Transmission Car?

Automatic transmission cars require the use of the handbrake when parking, especially on slopes, to prevent the vehicle from rolling. Below are the relevant details about parking an automatic transmission car: Parking procedure: When parking on level ground with an automatic transmission, follow this sequence: shift to N (Neutral), release the foot brake, apply the handbrake, shift to P (Park), and turn off the engine. When parking on a slope, follow this sequence: shift to N (Neutral), firmly apply the handbrake, release the foot brake, shift to P (Park), and turn off the engine. Precautions when applying the handbrake: The handbrake mechanism is a ratchet system. Pulling it too tightly can cause plastic deformation of the steel wire cable. This deformation is irreversible, which may increase the handbrake's travel distance and also affect its braking performance.
7
1
Share

Why Do New Cars Consume More Fuel?

New cars have higher fuel consumption due to reasons such as insufficient break-in, poor fuel system flow, and excessive vehicle load. During the break-in period, the friction resistance of new components is relatively high, leading to increased fuel consumption. Insufficient Break-in: For a newly purchased car, the engine components have not yet fully broken in, resulting in smaller gaps between parts and greater operational resistance compared to a broken-in engine. Therefore, it's advisable to patiently complete the break-in period and observe if fuel consumption changes after the first maintenance. If fuel consumption remains higher post-break-in, it may indicate dirty fuel injectors or throttle body that require cleaning. Poor Fuel System Flow: Excessive engine carbon buildup is the primary cause of poor fuel system flow, often resulting from using inappropriate fuel in the short term. Excessive Vehicle Load: Avoid driving with excessive weight during the break-in period. A lighter load is better for new cars as heavy loads can cause damage.
11
3
Share

What do China III and China IV mean in automobiles?

China III, China IV, and China V in automobile displacement refer to the emission standards for vehicles. They are as follows: 1. China's third-stage emission standard: This standard's tailpipe pollutant content is equivalent to Euro III, with the difference being that new vehicles must be equipped with an OBD, or On-Board Diagnostics system. 2. China's fourth-stage motor vehicle pollutant emission standard: Under this standard, vehicle emissions mainly include hydrocarbons, nitrogen oxides, PM, etc. Through the application of technologies such as improved catalytic converter active layers, secondary air injection, and exhaust gas recirculation systems with cooling devices, the standard controls and reduces vehicle emissions to below specified levels. 3. China's fifth-stage motor vehicle pollutant emission standard: This standard is equivalent to the Euro 5 emission standard currently implemented in Europe. The European Union has been enforcing it since 2009, imposing stricter limits on nitrogen oxides, hydrocarbons, carbon monoxide, and suspended particles in vehicle emissions.
11
5
Share

What is the function of a car headrest?

The main function of a car headrest is to protect the fragile neck and provide cushioning for the head in the event of a rear-end collision. Introduction to the correct use and positioning of headrests: Adjust the angle between your body and the seat correctly, keeping your back as upright as possible. The distance between the back of your head and the headrest should be as small as possible, preferably no more than 10 centimeters. Due to varying passenger heights, the adjustment range of the headrest also differs. Adjust according to specific circumstances. Introduction to car pillows: Car pillows are used to adjust the contact points between the body and the seat to achieve a more comfortable angle and reduce fatigue. Different types of car pillows can also provide protection for the body. Car pillows can also serve as decorations; contrasting their colors and materials with the surrounding environment can enrich the artistic effect of the car's interior design.
17
2
Share

What is the method for removing stains on a white car?

The method for removing stains on a white car is: 1. Wash the car thoroughly and dry it; 2. Soak a towel in water, wring it slightly, and apply some essential balm to the towel; 3. Gently wipe the stained area of the car with the towel soaked in essential balm, repeating every 2 minutes until the stain disappears. The maintenance methods for a white car are: 1. Remove dust from the car body promptly before, during, and after use to reduce the adsorption of dust due to static electricity; 2. After rain, water stains on the car body will gradually shrink, increasing the concentration of acidic substances in the rainwater, so rinse with clean water as soon as possible to avoid damaging the car paint; 3. Use special car wash detergent and neutral water to clean the car, avoiding highly alkaline detergents or soaps to prevent stripping the oils from the paint and accelerating paint aging.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.